Do 5" drop coils in rear really require c-notch??? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

thenormans05 · 09-23-2012, 10:04 PM

So I'm about to order all my drop springs and spindles and what I would like to run is 4 1/2 in the front and 5 in the rear, I just don't want to c-notch it of I don't have too. Thanks anyone with this lift please send pics if you can..
Posted via Mobile Device

gringoloco · 09-23-2012, 11:24 PM

Generally not necessary with 5" coils, but you'll be close with a load. You will have a lot of rake with that drop combination, though...
Posted via Mobile Device

thenormans05 · 09-23-2012, 11:54 PM

What do you mean by that? The back end is still going to be too high?
Posted via Mobile Device

thenormans05 · 09-23-2012, 11:57 PM

I am going with the McGaughys 2 1/2 drop spindles with 2" drop coils on the front and I want the back end to be pretty much level or about an inch higher. What should I do
Posted via Mobile Device

502ms · 09-23-2012, 11:59 PM

You might want to be at 6" or 7" rear for even stance. That will require a notch.
Posted via Mobile Device

thenormans05 · 09-24-2012, 12:09 AM

Where can I find coils that size? I have a Brothers catalog and a LMC and they only go to 5"
Posted via Mobile Device

jwalk · 09-24-2012, 12:20 AM

Early classic enterprises has 6" coils.
I had a 72 with 3.5 in the front and 5 in the rear and it had around a inch rake.
Posted via Mobile Device
Posted via Mobile Device

jwalk · 09-24-2012, 12:21 AM

I also didn't run a c notch.
Posted via Mobile Device

thenormans05 · 09-24-2012, 12:38 AM

Ok thanks guys I just looked at early classics 4/6 kit I think I going to go with that. Thanks again for the help I'm a rookie on suspension.
Posted via Mobile Device

jwalk · 09-24-2012, 12:44 AM

I also had a shorter front tire. I don't think you can go wrong with ECE 4/6! Good luck! This was 3.5/5 with 275/60 rear and 245/60 front
Name: image.jpg
Views: 2294
Size: 82.0 KB

Name: image.jpg
Views: 2294
Size: 82.0 KB

Posted via Mobile Device

gringoloco · 09-24-2012, 11:48 AM

Quote:

Originally Posted by thenormans05

Ok thanks guys I just looked at early classics 4/6 kit I think I going to go with that. Thanks again for the help I'm a rookie on suspension.
Posted via Mobile Device

Can't go wrong with the ECE 4/6. Good choice!

RexDodge · 09-24-2012, 12:20 PM

Here is a 4.5" front (2" coils with2.5" spindles) and 7" rear (5" coils and a 2" bock). I am undecided if I will change that to a 1" block. At this time I have a 1" rake. Need to get some miles on it and let it settle before I change anything. If I stay at this height a c notch is going in.

thenormans05 · 09-24-2012, 05:58 PM

Thanks for the pics. I went ahead and ordered the 4/6 drop from early classics, looks like a nice kit. Thanks again
Posted via Mobile Device

**N2TRUX** · 09-24-2012, 06:59 PM

Quote:

Originally Posted by RexDodge

Here is a 4.5" front (2" coils with2.5" spindles) and 7" rear (5" coils and a 2" bock). I am undecided if I will change that to a 1" block. At this time I have a 1" rake. Need to get some miles on it and let it settle before I change anything. If I stay at this height a c notch is going in.

It looks like you are running 15" wheels. If so please consider changing the 2" block to a 1.5" or 1" and cut the u-bolts down when your done.

Your current set up can be potentially hazardous with scrubline concerns. The tall blocks and extra length on those u-bolts will put your rear suspension on the ground in the event of a blow out. Not a safe scenario at all.

RexDodge · 09-24-2012, 11:59 PM

Quote:

Originally Posted by N2TRUX

It looks like you are running 15" wheels. If so please consider changing the 2" block to a 1.5" or 1" and cut the u-bolts down when your done.

Your current set up can be potentially hazardous with scrubline concerns. The tall blocks and extra length on those u-bolts will put your rear suspension on the ground in the event of a blow out. Not a safe scenario at all.

I appreciate the insight. Haven't put it on the road yet hence the u bolts not cut. I have been told before of the issues with a 2" block and clearance. 15" wheels will go soon enough.

OJ1988 · 09-25-2012, 10:52 AM

5" springs on the rear of mine, and I have a couple inches of travel before it his my bumpstops. No way its hitting the frame. Mine is a 69 c10.

GobbleStalker · 10-13-2012, 04:26 PM

I have the same question I am just prepping the frame for paint now. I am putting in 5 inch rear coils and want to know now if I should c notch or not. I am building a show truck so the biggeast load it will see is a couple of lawn chairs and a cooler or 2.

Thoughts.

Thanks
Kevin

OJ1988 · 10-13-2012, 05:15 PM

Quote:

Originally Posted by GobbleStalker

I have the same question I am just prepping the frame for paint now. I am putting in 5 inch rear coils and want to know now if I should c notch or not. I am building a show truck so the biggeast load it will see is a couple of lawn chairs and a cooler or 2.

Thoughts.

Thanks
Kevin

Did you read my post right above yours?
Posted via Mobile Device

GobbleStalker · 10-13-2012, 08:58 PM

Ok with a 5 inch drop do I need to move the axle back and how do I do that if needed?

OJ1988 · 10-13-2012, 09:11 PM

Quote:

Originally Posted by GobbleStalker

Ok with a 5 inch drop do I need to move the axle bag and how do I do that if needed?

If you meant move the axle back, no you don't have to.
Posted via Mobile Device

GobbleStalker · 10-13-2012, 10:08 PM

LOL Thanks yes I did mean back.

09-23-2012, 10:04 PM	#1
thenormans05 Registered User Join Date: Jul 2009 Location: Tyler, Tx Posts: 38	Do 5" drop coils in rear really require c-notch??? So I'm about to order all my drop springs and spindles and what I would like to run is 4 1/2 in the front and 5 in the rear, I just don't want to c-notch it of I don't have too. Thanks anyone with this lift please send pics if you can.. Posted via Mobile Device

09-23-2012, 11:24 PM	#2
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,920	Re: Do 5" drop coils in rear really require c-notch??? Generally not necessary with 5" coils, but you'll be close with a load. You will have a lot of rake with that drop combination, though... Posted via Mobile Device __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy

09-23-2012, 11:54 PM	#3
thenormans05 Registered User Join Date: Jul 2009 Location: Tyler, Tx Posts: 38	Re: Do 5" drop coils in rear really require c-notch??? What do you mean by that? The back end is still going to be too high? Posted via Mobile Device

09-23-2012, 11:57 PM	#4
thenormans05 Registered User Join Date: Jul 2009 Location: Tyler, Tx Posts: 38	Re: Do 5" drop coils in rear really require c-notch??? I am going with the McGaughys 2 1/2 drop spindles with 2" drop coils on the front and I want the back end to be pretty much level or about an inch higher. What should I do Posted via Mobile Device

09-23-2012, 11:59 PM	#5
502ms Registered User Join Date: Aug 2011 Location: Atlanta, GA Posts: 1,523	Re: Do 5" drop coils in rear really require c-notch??? You might want to be at 6" or 7" rear for even stance. That will require a notch. Posted via Mobile Device __________________ Best Regards, Leon M. Instagram: @TheDirtyDianah Bagged \| 6.0L LS \| T-56 (6-Speed Manual) \| Turbo Burnout/Rolling Video: Chevy C10 Stepside 6.0L LSx & 6-Speed Manual

09-24-2012, 12:09 AM	#6
thenormans05 Registered User Join Date: Jul 2009 Location: Tyler, Tx Posts: 38	Re: Do 5" drop coils in rear really require c-notch??? Where can I find coils that size? I have a Brothers catalog and a LMC and they only go to 5" Posted via Mobile Device

09-24-2012, 12:20 AM	#7
jwalk What was I thinking? Join Date: Mar 2007 Location: oklahoma Posts: 1,137	Re: Do 5" drop coils in rear really require c-notch??? Early classic enterprises has 6" coils. I had a 72 with 3.5 in the front and 5 in the rear and it had around a inch rake. Posted via Mobile Device Posted via Mobile Device __________________ Justin '68 C/10 Custom Long wide bed '78 GMC Sierra short wide Project: Second time around...'68 short wide http://67-72chevytrucks.com/vboard/s...d.php?t=423949

09-24-2012, 12:21 AM	#8
jwalk What was I thinking? Join Date: Mar 2007 Location: oklahoma Posts: 1,137	Re: Do 5" drop coils in rear really require c-notch??? I also didn't run a c notch. Posted via Mobile Device __________________ Justin '68 C/10 Custom Long wide bed '78 GMC Sierra short wide Project: Second time around...'68 short wide http://67-72chevytrucks.com/vboard/s...d.php?t=423949

09-24-2012, 12:38 AM	#9
thenormans05 Registered User Join Date: Jul 2009 Location: Tyler, Tx Posts: 38	Re: Do 5" drop coils in rear really require c-notch??? Ok thanks guys I just looked at early classics 4/6 kit I think I going to go with that. Thanks again for the help I'm a rookie on suspension. Posted via Mobile Device

09-24-2012, 12:44 AM	#10
jwalk What was I thinking? Join Date: Mar 2007 Location: oklahoma Posts: 1,137	Re: Do 5" drop coils in rear really require c-notch??? I also had a shorter front tire. I don't think you can go wrong with ECE 4/6! Good luck! This was 3.5/5 with 275/60 rear and 245/60 front Posted via Mobile Device __________________ Justin '68 C/10 Custom Long wide bed '78 GMC Sierra short wide Project: Second time around...'68 short wide http://67-72chevytrucks.com/vboard/s...d.php?t=423949

09-24-2012, 12:20 PM	#12
RexDodge Registered User Join Date: Apr 2008 Location: Oregon City, Oregon Posts: 741	Re: Do 5" drop coils in rear really require c-notch??? Here is a 4.5" front (2" coils with2.5" spindles) and 7" rear (5" coils and a 2" bock). I am undecided if I will change that to a 1" block. At this time I have a 1" rake. Need to get some miles on it and let it settle before I change anything. If I stay at this height a c notch is going in. Attached Images

09-24-2012, 05:58 PM	#13
thenormans05 Registered User Join Date: Jul 2009 Location: Tyler, Tx Posts: 38	Re: Do 5" drop coils in rear really require c-notch??? Thanks for the pics. I went ahead and ordered the 4/6 drop from early classics, looks like a nice kit. Thanks again Posted via Mobile Device

09-25-2012, 10:52 AM	#16
OJ1988 Just a car guy Join Date: Feb 2006 Location: New Washington, IN Posts: 991	Re: Do 5" drop coils in rear really require c-notch??? 5" springs on the rear of mine, and I have a couple inches of travel before it his my bumpstops. No way its hitting the frame. Mine is a 69 c10. __________________ 1955 belair Blown Pro Street cruiser 1971 Camaro Pro Touring 1973 Vega Drag Car 1970 C20 tow rig

10-13-2012, 04:26 PM	#17
GobbleStalker GobbleStalker Calls Join Date: Aug 2010 Location: Port Hope, Ontario Posts: 653	Re: Do 5" drop coils in rear really require c-notch??? I have the same question I am just prepping the frame for paint now. I am putting in 5 inch rear coils and want to know now if I should c notch or not. I am building a show truck so the biggeast load it will see is a couple of lawn chairs and a cooler or 2. Thoughts. Thanks Kevin __________________ 72 Chev Longbox Highlander edition. Med Olive/White/ Med Olive 350 4bbl with 350Turbo trans. Truck currently under construction. Project Cappaccino. Stay Tuned! 1967 Chevy C10, 327, 4.11 posi 3 spd. The Driver Truck! SOLD! 09 GMC Sierra SLT All Terrain pkg. 2014 Jeep Wrangler Sahara unlimited. ( The wifes ride )

10-13-2012, 08:58 PM	#19
GobbleStalker GobbleStalker Calls Join Date: Aug 2010 Location: Port Hope, Ontario Posts: 653	Re: Do 5" drop coils in rear really require c-notch??? Ok with a 5 inch drop do I need to move the axle back and how do I do that if needed? __________________ 72 Chev Longbox Highlander edition. Med Olive/White/ Med Olive 350 4bbl with 350Turbo trans. Truck currently under construction. Project Cappaccino. Stay Tuned! 1967 Chevy C10, 327, 4.11 posi 3 spd. The Driver Truck! SOLD! 09 GMC Sierra SLT All Terrain pkg. 2014 Jeep Wrangler Sahara unlimited. ( The wifes ride ) Last edited by GobbleStalker; 10-13-2012 at 10:08 PM.



Register or Log In To remove these advertisements.

10-13-2012, 10:08 PM	#21
GobbleStalker GobbleStalker Calls Join Date: Aug 2010 Location: Port Hope, Ontario Posts: 653	Re: Do 5" drop coils in rear really require c-notch??? LOL Thanks yes I did mean back. __________________ 72 Chev Longbox Highlander edition. Med Olive/White/ Med Olive 350 4bbl with 350Turbo trans. Truck currently under construction. Project Cappaccino. Stay Tuned! 1967 Chevy C10, 327, 4.11 posi 3 spd. The Driver Truck! SOLD! 09 GMC Sierra SLT All Terrain pkg. 2014 Jeep Wrangler Sahara unlimited. ( The wifes ride )

Register or Log In To remove these advertisements.