1968

[Bomp]

Originally Posted by gdavis

Today I wired whelied about half of my frame. My sand blaster would not cut thru the built up grease and road tar or asfault. Tomorrow I will do the inside of the frame. It takes a different wire wheel that the out side. Another trip to my hardware store called Home depot. Here is my Home made rotisserie I built for my truck frame.
First, I got 2 6x6x10' presure treated post. Drilled one 1 inch hole in each post. Mounted a 2x4x4' on each end of my frame. Drilled 1 inch holes to match the post and two pieces of 3/4 pvc 6' long that I drove into the post. Then I got two bolts 12" long by 5/8 and two nuts and the frame turns free. It can rotate 360 without any trouble. Now I can do all my work standing or sitting in a chair. No crawing under and over the frame. It took me abl out 2 hr and the rest is History.

That right there is THINKING ahead!
I like it.