|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
10-13-2012, 08:33 PM
|
#1 |
|
Registered User
Join Date: Nov 2010
Location: Houston, MS
Posts: 184
|
Radiator for my 51 3800.
Has any one here used a aluminum champion radiator ( its suppose to bolt in ) my old one is plugged and needs to be recored . This is supposed to be a bolt in and 3 row as well.I am just trying to see before i drop the dough.
THanks LMD |
|
|
|
10-13-2012, 08:49 PM
|
#2 |
|
Registered User
Join Date: Jan 2011
Location: Champlin Mn.
Posts: 54
|
Re: Radiator for my 51 3800.
I put one in my 49 with a 350 it bolts right in and seems to cool good no problems so far
|
|
|
|
|
10-13-2012, 10:30 PM
|
#3 |
|
Registered User
Join Date: Nov 2010
Location: Houston, MS
Posts: 184
|
Re: Radiator for my 51 3800.
Ok thanks. Any one else out there. let me know what to look for etc. Mine is the original and I just put a 250 and a 2004r in and it takes a while but it gets a little warmer than I like . I took a infrared heat gun and scoped the radiator and then the head, thermostat housing , and even where the heat sender is and even though the radiator tank is about 185 the head etc is much warmer - a lot warmer than I like - water pump and impeller check out , as does the thermostat-so I figure it is not flowing enough water .
Sound off guys you won't hurt my feelings - better to do it once than twice, etc. |
|
|
|
|
10-17-2012, 08:34 PM
|
#4 |
|
Registered User
Join Date: Oct 2011
Location: Mobile, Al
Posts: 6
|
Re: Radiator for my 51 3800.
I just put one in my 51. Bolts right in and cools my 350 very well.
Posted via Mobile Device |
|
|
|
|
| Bookmarks |
|
|
Linear Mode
