MO 64-66 uncut dash Free! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jdl71 · 10-20-2012, 07:42 PM

I'm tired of fighting this so here's the deal. I'm in central MO and if someone wants to finish pulling it, it's yours. 2 bolts are stripped and I've drilled at least 300000 spot welds and it still barely seems loose. Great deal for someone close with a little time on your hands.

Posted via Mobile Device
Posted via Mobile Device

**pdxhall** · 10-22-2012, 04:58 AM

you shouldn't need to cut all those spot welds if you're just trying to remove the dash. There are 4 spot welds
under the inner windshield channel ( that's where the 30000 spot welds come in to play) and the bolts on each side that you are already dealing with, and it should come right out.

10-20-2012, 07:42 PM	#1
jdl71 Registered User Join Date: Oct 2012 Location: Eldon, MO Posts: 1,753	64-66 uncut dash Free! I'm tired of fighting this so here's the deal. I'm in central MO and if someone wants to finish pulling it, it's yours. 2 bolts are stripped and I've drilled at least 300000 spot welds and it still barely seems loose. Great deal for someone close with a little time on your hands. Posted via Mobile Device Posted via Mobile Device

10-22-2012, 04:58 AM	#2
pdxhall Senior Member Join Date: Mar 2011 Location: Tucson, Arizona Posts: 2,084	Re: 64-66 uncut dash Free! you shouldn't need to cut all those spot welds if you're just trying to remove the dash. There are 4 spot welds under the inner windshield channel ( that's where the 30000 spot welds come in to play) and the bolts on each side that you are already dealing with, and it should come right out.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.