"while your at it" items when installing 3/4 drop kit

[jrblanke]

I should have added that my plans were to clean, inspect, and repack the bearings. I have power washed everything from the cab back and I am planning to use an angle grinder to wire brush the frame, springs, and rear end. Then I will paint it with some rustolium primer and paint. I bought spray can primer, but bought black paint that I will put on with a roller. I am replacing the rear shocks with some new ones from procomp (same ones cue ball recommended). I believe I am going to clean and paint the front calipers, dust shields, and A arms as well.

Thanks for the suggestions