Iginition Lock on 67 Suburban - The 1947 - Present Chevrolet & GMC Truck Message Board Network

JohnJ · 10-31-2012, 02:58 PM

I just acquired a 1967 GMC Suburban that did not come with keys. I have not been able to remove the ignition lock, very frustrating. I have been able to loosen the ring that holds the ignition lock in the dash but after a few turns, it just spins around. Can anybody give me the trick to remove the lock without the key?

s_nova69 · 10-31-2012, 04:15 PM

Cut it out with a grinder or sawzall. I dont know of a way to get it out without the key. IF you did have the key you put a paperclip in the tiny hole in the face near where you put the key and turn it back until the lock cylinder comes out.

Others might chime in on a way they have found without the key.

**LockDoc** · 10-31-2012, 09:07 PM

-
Welcome to the board John.

Read this thread...

http://67-72chevytrucks.com/vboard/s...d.php?t=462981

s_nova69, you should read it too, it will give you a better understanding of the procedure so you can pass the correct information on.

Let me know if you have any other questions...

LockDoc

10-31-2012, 02:58 PM	#1
JohnJ Registered User Join Date: Oct 2012 Location: Albuquerque, NM Posts: 1	Iginition Lock on 67 Suburban I just acquired a 1967 GMC Suburban that did not come with keys. I have not been able to remove the ignition lock, very frustrating. I have been able to loosen the ring that holds the ignition lock in the dash but after a few turns, it just spins around. Can anybody give me the trick to remove the lock without the key?

10-31-2012, 04:15 PM	#2
s_nova69 Registered User Join Date: Jul 2007 Location: slc, ut Posts: 318	Re: Iginition Lock on 67 Suburban Cut it out with a grinder or sawzall. I dont know of a way to get it out without the key. IF you did have the key you put a paperclip in the tiny hole in the face near where you put the key and turn it back until the lock cylinder comes out. Others might chime in on a way they have found without the key. __________________ Phil '70 Longhorn 421 700r4 tach 4 wheel disc hydroboost daily driver '72 short super build 4wd '72 Suburban LT4 coming soon!!

10-31-2012, 09:07 PM	#3
LockDoc The Older Generation Join Date: Aug 2006 Location: Montezuma, Iowa Posts: 25,815	Re: Iginition Lock on 67 Suburban - Welcome to the board John. Read this thread... http://67-72chevytrucks.com/vboard/s...d.php?t=462981 s_nova69, you should read it too, it will give you a better understanding of the procedure so you can pass the correct information on. Let me know if you have any other questions... LockDoc __________________ Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 - Last edited by LockDoc; 10-31-2012 at 09:13 PM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.