mirror screws 64-66 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**yelmer** · 12-27-2011, 10:38 AM

anybody have any of these they want to get rid of

NorthstarGMC · 12-28-2011, 06:21 AM

Try Ace Hardware or Fastenall.

**yelmer** · 12-28-2011, 10:05 AM

i no luck at those places i think these were special made for gm?

1963c-10 · 12-28-2011, 10:14 AM

Saw them new in classic industries cat...affordable

**Palf70Step** · 12-28-2011, 10:16 AM

Looks like LMC has them

http://www.lmctruck.com/icatalog/cbe/full.aspx?Page=47

**yelmer** · 12-28-2011, 10:35 AM

yes they have them but they are not the same look. as these. i am looking for orignal style . i was hoping somebody would have some old ones they have taken off thanks for the info

**LostMy65** · 10-31-2012, 11:26 PM

http://www.classicparts.com/1956-69-.../#.UJHqyoXyDD0

**MisterC** · 11-01-2012, 12:59 AM

I have the ones from Classic Parts. They look great, but the did start to rust a bit rather quickly.
Posted via Mobile Device

markeb01 · 11-01-2012, 01:35 AM

I'm pretty sure I have three of those that Tony Smith sent me and I ended up not using. I also have 3 or the 1960 style with the bigger heads. I'll dig them up tomorrow and if they're the correct kind I'll mail them to you.

**LostMy65** · 11-01-2012, 06:12 AM

Quote:

Originally Posted by markeb01

I'm pretty sure I have three of those that Tony Smith sent me and I ended up not using. I also have 3 or the 1960 style with the bigger heads. I'll dig them up tomorrow and if they're the correct kind I'll mail them to you.

What did you end up using?

Do you know what size and thread they are?

Posted via Mobile Device

**yelmer** · 11-01-2012, 10:17 AM

I am still needing some if anybody has any extras thanks mike

**LostMy65** · 11-01-2012, 10:36 AM

Quote:

Originally Posted by yelmer

I am still needing some if anybody has any extras thanks mike

I think Mark was talking to you when he said he had some extra.
Posted via Mobile Device

markeb01 · 11-01-2012, 01:06 PM

Quote:

Originally Posted by yelmer

I am still needing some if anybody has any extras thanks mike

These are the mirror screws I have. The one on the left came with an original mirror arm I grabbed at a junkyard back around 1992. The other 3 came from Tony. The last 3 in the second photo are the original 1960 screws that were in the door of my truck since new.

If you’re interested in any or all shoot me a PM and I’ll get them in the mail.

I ended up using stainless oval head screws. Since nothing on my truck is stock I liked them better because they filled up the entire cavity on the mirror mount, much like the original wide head 1960 screws did.

The thread size is the same on all these screws - 5/16x-18. The length of the thread alone is 3/4" on the later screws, and 5/8" on the 1960 screws. I don't remember the length on the stainless screws but they were probably 3/4". I got tired of the shiny surface so I chucked them in the drill and sanded the heads, after which they were painted black to match the mirrors.

**LostMy65** · 11-01-2012, 02:41 PM

Quote:

Originally Posted by markeb01

I ended up using stainless oval head screws. Since nothing on my truck is stock I liked them better because they filled up the entire cavity on the mirror mount, much like the original wide head 1960 screws did.

The thread size is the same on all these screws - 5/16x-18. The length of the thread alone is 3/4" on the later screws, and 5/8" on the 1960 screws. I don't remember the length on the stainless screws but they were probably 3/4". I got tired of the shiny surface so I chucked them in the drill and sanded the heads, after which they were painted black to match the mirrors.

Do you remember where you found them?
I went to homedepot yesterday and couldn't find that size in SS.
Posted via Mobile Device

markeb01 · 11-01-2012, 04:34 PM

I might have found them at Lowes in their specialty fastener section, or it may have been a local hardware store chain called Big R here in Spokane. They also carry a somewhat limited variety of stainless and chrome fasteners. Either way they did come from a local hardware store and are the style in the drawings below:

kieth · 11-01-2012, 05:51 PM

We have these in stock, 5/16-18 x 1" (the thread is 3/4" long) SS oval head phillips drive got about 200 of them and can get more...... about .57 cents each........Kieth

I do not own them we have them where I work at a fastener distributor, minimum order is $ 3.00 Kieth

If someone would buy more the price goes down.....

12-27-2011, 10:38 AM	#1
yelmer Registered User Join Date: Aug 2008 Location: greeley colorado Posts: 1,360	mirror screws 64-66 anybody have any of these they want to get rid of Attached Images

12-28-2011, 06:21 AM	#2
NorthstarGMC Registered User Join Date: Jul 2011 Location: Michigan Posts: 44	Re: mirror screws 64-66 Try Ace Hardware or Fastenall. __________________ 1963 GMC Wideside powered by a LH2 32v Northstar

12-28-2011, 10:05 AM	#3
yelmer Registered User Join Date: Aug 2008 Location: greeley colorado Posts: 1,360	Re: mirror screws 64-66 i no luck at those places i think these were special made for gm?

12-28-2011, 10:14 AM	#4
1963c-10 Registered User Join Date: Nov 2011 Location: fayetteville nc Posts: 10,338	Re: mirror screws 64-66 Saw them new in classic industries cat...affordable __________________ 1963 Short bed step side SBW 427 big block and borg warner T-16 HD 3 speed manual http://67-72chevytrucks.com/vboard/s...d.php?t=519869 1963 Short bed fleetside BBW 348 1st gen big block w/Powerglide http://67-72chevytrucks.com/vboard/s...d.php?t=619024 1964 Short bed trailer

12-28-2011, 10:16 AM	#5
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 46,761	Re: mirror screws 64-66 Looks like LMC has them http://www.lmctruck.com/icatalog/cbe/full.aspx?Page=47 __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!

12-28-2011, 10:35 AM	#6
yelmer Registered User Join Date: Aug 2008 Location: greeley colorado Posts: 1,360	Re: mirror screws 64-66 yes they have them but they are not the same look. as these. i am looking for orignal style . i was hoping somebody would have some old ones they have taken off thanks for the info

10-31-2012, 11:26 PM	#7
LostMy65 But Found Her 25yrs Later! Join Date: Oct 2010 Location: Oregon City, Oregon Posts: 10,523	Re: mirror screws 64-66 http://www.classicparts.com/1956-69-.../#.UJHqyoXyDD0 __________________ I lost my 65 - Found it 25 years later: http://67-72chevytrucks.com/vboard/s...d.php?t=426650 66 C20 Service Truck: http://67-72chevytrucks.com/vboard/s...d.php?t=428035

11-01-2012, 12:59 AM	#8
MisterC Senior Member Join Date: Sep 2011 Location: Hanford, CA Posts: 1,027	Re: mirror screws 64-66 I have the ones from Classic Parts. They look great, but the did start to rust a bit rather quickly. Posted via Mobile Device __________________ Poor and content is Rich...and Rich enough! - William Shakespeare 1966 C10 Custom Cab "Luigi" Big Window - SWB Fleetside 350 V-8 - Powerglide My not so much a build thread as a "Slow Progression Thread":http://67-72chevytrucks.com/vboard/s...d.php?t=486894

11-01-2012, 01:35 AM	#9
markeb01 Senior Enthusiast Join Date: Feb 2007 Location: Spokane Valley, WA Posts: 8,356	Re: mirror screws 64-66 I'm pretty sure I have three of those that Tony Smith sent me and I ended up not using. I also have 3 or the 1960 style with the bigger heads. I'll dig them up tomorrow and if they're the correct kind I'll mail them to you. __________________ My Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=444502

11-01-2012, 10:17 AM	#11
yelmer Registered User Join Date: Aug 2008 Location: greeley colorado Posts: 1,360	Re: mirror screws 64-66 I am still needing some if anybody has any extras thanks mike

11-01-2012, 04:34 PM	#15
markeb01 Senior Enthusiast Join Date: Feb 2007 Location: Spokane Valley, WA Posts: 8,356	Re: mirror screws 64-66 I might have found them at Lowes in their specialty fastener section, or it may have been a local hardware store chain called Big R here in Spokane. They also carry a somewhat limited variety of stainless and chrome fasteners. Either way they did come from a local hardware store and are the style in the drawings below: __________________ My Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=444502

11-01-2012, 05:51 PM	#16
kieth Registered User Join Date: Sep 2010 Location: Tulsa, Oklahoma Posts: 1,925	Re: mirror screws 64-66 We have these in stock, 5/16-18 x 1" (the thread is 3/4" long) SS oval head phillips drive got about 200 of them and can get more...... about .57 cents each........Kieth I do not own them we have them where I work at a fastener distributor, minimum order is $ 3.00 Kieth If someone would buy more the price goes down.....



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.