Going to shoot the old truck this weekend! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

bigboybodry · 10-30-2012, 10:59 AM

Going to Lena,MS this weekend to a full size truck race at Mississippi Motorsports Park sat. Nov. 3rd. If anyone is in the area come on down and hang out! It is a big race and they added a full size street truck class. Should be fun filled all day event!

The first time the truck has had any nos hooked to it and I plan on have a great time! look for a 30 foot enclosed trailer behind a 2006 silver F350 and of course my old truck. hope some can come!!!

nxtruck · 11-01-2012, 08:09 PM

Sounds like fun! Let us know how it goes. Good luck and have fun!

bigboybodry · 11-05-2012, 10:04 AM

well I had problems with the trans brake so I foot braked it and shot 150hp out the hole

Super73 · 11-05-2012, 10:14 AM

What did it run on motor?
Posted via Mobile Device

bigboybodry · 11-05-2012, 02:03 PM

This was the last time out off the foot brake on motor. I didn't run it on motor this time out

nxtruck · 11-05-2012, 04:38 PM

Not bad for it's first trip out! If you didn't break anything, then it was a good night!

bigboybodry · 11-05-2012, 06:42 PM

I had some problems with one stage of nos and the trans brake. We all came home safe and everything is in tack. All in all a great day of racing!

Super73 · 11-05-2012, 09:31 PM

Was this one stage? Looks like you picked up about 7.5mph. What size N2O jet?
Posted via Mobile Device

bigboybodry · 11-05-2012, 10:21 PM

yes just one stage 18/22 jets it got out the gate a little better.

djracer · 11-05-2012, 10:50 PM

Congrats on no carnage. If you need any wiring help let me know!

Super73 · 11-06-2012, 12:10 AM

So I take it it is a direct port/fogger deal. Guess I didn't realize that, thought it was a plate system.

How did the plugs look after the bottle pass?

bigboybodry · 11-06-2012, 09:38 AM

They need to lean up a little so I am going to start opening the spread. The pass was clean no popping etc so I feel like I am in the ballpark.
I found the problem with the wiring. It had a voltage drop to 7.4 volts at the trans brake relay.
I have to finish my shop so my wife can have her garage back before I return to the track so it may be a while.

bigboybodry · 11-06-2012, 09:40 AM

Quote:

Originally Posted by djracer

Congrats on no carnage. If you need any wiring help let me know!

Thanks brother, hate I didn't get to catch up with ya'll at ctc. I was being drug all over the place.

nxtruck · 11-06-2012, 11:12 AM

Were those passes made on the Sportsman Pros?

bigboybodry · 11-06-2012, 01:05 PM

Quote:

Originally Posted by nxtruck

Were those passes made on the Sportsman Pros?

no a m/t 31 10.5 w

hotrod 80 · 11-06-2012, 05:49 PM

That W is a problem solver . Wish i could fit them on my junk .

nxtruck · 11-06-2012, 05:54 PM

Quote:

Originally Posted by bigboybodry

no a m/t 31 10.5 w

OK, gotcha. I was gonna say that's probably the best 60' time I had ever heard of using those hard Sportsman pros. Anyhow, glad you didn't tear anything up!

bigboybodry · 11-06-2012, 06:25 PM

Thanks looking forward to tuning both kits and getting everything dialed in!

10-30-2012, 10:59 AM	#1
bigboybodry Registered User Join Date: Jul 2009 Location: Florence,Mississippi Posts: 301	Going to shoot the old truck this weekend! Going to Lena,MS this weekend to a full size truck race at Mississippi Motorsports Park sat. Nov. 3rd. If anyone is in the area come on down and hang out! It is a big race and they added a full size street truck class. Should be fun filled all day event! The first time the truck has had any nos hooked to it and I plan on have a great time! look for a 30 foot enclosed trailer behind a 2006 silver F350 and of course my old truck. hope some can come!!! __________________ first track pass with the new motor on motor http://youtu.be/YgrJaEF_TaQ

11-01-2012, 08:09 PM	#2
nxtruck Registered User Join Date: Jun 2006 Location: Jackson, Mo. Posts: 607	Re: Going to shoot the old truck this weekend! Sounds like fun! Let us know how it goes. Good luck and have fun! __________________ Chris 1966 Chevy C10 LWB, 434 sbc, TH350, 12-bolt, factory suspension, pump gas 7.02 @ 95.8, 1.45 60' 1965 Chevy C10 LWB, 355 sbc, TH350, daily driver

11-05-2012, 10:04 AM	#3
bigboybodry Registered User Join Date: Jul 2009 Location: Florence,Mississippi Posts: 301	Re: Going to shoot the old truck this weekend! well I had problems with the trans brake so I foot braked it and shot 150hp out the hole Attached Images __________________ first track pass with the new motor on motor http://youtu.be/YgrJaEF_TaQ

11-05-2012, 10:14 AM	#4
Super73 Registered User Join Date: Nov 2007 Location: Bay Area, Ca Posts: 2,841	Re: Going to shoot the old truck this weekend! What did it run on motor? Posted via Mobile Device __________________ ------Motor---------------Bottle 60'---1.53---------------1.41 1/8---6.58 @ 105.92----5.87 @ 118.41 1/4---10.38 @ 126.97----9.24 @ 142.49

11-05-2012, 02:03 PM	#5
bigboybodry Registered User Join Date: Jul 2009 Location: Florence,Mississippi Posts: 301	Re: Going to shoot the old truck this weekend! This was the last time out off the foot brake on motor. I didn't run it on motor this time out Attached Images __________________ first track pass with the new motor on motor http://youtu.be/YgrJaEF_TaQ

11-05-2012, 04:38 PM	#6
nxtruck Registered User Join Date: Jun 2006 Location: Jackson, Mo. Posts: 607	Re: Going to shoot the old truck this weekend! Not bad for it's first trip out! If you didn't break anything, then it was a good night! __________________ Chris 1966 Chevy C10 LWB, 434 sbc, TH350, 12-bolt, factory suspension, pump gas 7.02 @ 95.8, 1.45 60' 1965 Chevy C10 LWB, 355 sbc, TH350, daily driver

11-05-2012, 06:42 PM	#7
bigboybodry Registered User Join Date: Jul 2009 Location: Florence,Mississippi Posts: 301	Re: Going to shoot the old truck this weekend! I had some problems with one stage of nos and the trans brake. We all came home safe and everything is in tack. All in all a great day of racing! __________________ first track pass with the new motor on motor http://youtu.be/YgrJaEF_TaQ

11-05-2012, 09:31 PM	#8
Super73 Registered User Join Date: Nov 2007 Location: Bay Area, Ca Posts: 2,841	Re: Going to shoot the old truck this weekend! Was this one stage? Looks like you picked up about 7.5mph. What size N2O jet? Posted via Mobile Device __________________ ------Motor---------------Bottle 60'---1.53---------------1.41 1/8---6.58 @ 105.92----5.87 @ 118.41 1/4---10.38 @ 126.97----9.24 @ 142.49

11-05-2012, 10:21 PM	#9
bigboybodry Registered User Join Date: Jul 2009 Location: Florence,Mississippi Posts: 301	Re: Going to shoot the old truck this weekend! yes just one stage 18/22 jets it got out the gate a little better. __________________ first track pass with the new motor on motor http://youtu.be/YgrJaEF_TaQ

11-05-2012, 10:50 PM	#10
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,892	Re: Going to shoot the old truck this weekend! Congrats on no carnage. If you need any wiring help let me know! __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

11-06-2012, 12:10 AM	#11
Super73 Registered User Join Date: Nov 2007 Location: Bay Area, Ca Posts: 2,841	Re: Going to shoot the old truck this weekend! So I take it it is a direct port/fogger deal. Guess I didn't realize that, thought it was a plate system. How did the plugs look after the bottle pass? __________________ ------Motor---------------Bottle 60'---1.53---------------1.41 1/8---6.58 @ 105.92----5.87 @ 118.41 1/4---10.38 @ 126.97----9.24 @ 142.49

11-06-2012, 09:38 AM	#12
bigboybodry Registered User Join Date: Jul 2009 Location: Florence,Mississippi Posts: 301	Re: Going to shoot the old truck this weekend! They need to lean up a little so I am going to start opening the spread. The pass was clean no popping etc so I feel like I am in the ballpark. I found the problem with the wiring. It had a voltage drop to 7.4 volts at the trans brake relay. I have to finish my shop so my wife can have her garage back before I return to the track so it may be a while. __________________ first track pass with the new motor on motor http://youtu.be/YgrJaEF_TaQ

11-06-2012, 11:12 AM	#14
nxtruck Registered User Join Date: Jun 2006 Location: Jackson, Mo. Posts: 607	Re: Going to shoot the old truck this weekend! Were those passes made on the Sportsman Pros? __________________ Chris 1966 Chevy C10 LWB, 434 sbc, TH350, 12-bolt, factory suspension, pump gas 7.02 @ 95.8, 1.45 60' 1965 Chevy C10 LWB, 355 sbc, TH350, daily driver

11-06-2012, 05:49 PM	#16
hotrod 80 mini truck racer Join Date: Aug 2006 Location: Baytown , texas Posts: 3,010	Re: Going to shoot the old truck this weekend! That W is a problem solver . Wish i could fit them on my junk . __________________ 1949 5-window 1969 Camaro 1976 Chevy Luv yellow 1978 Chevy Luv Blue 1976 Chevy Luv Black 1979 Firebird Flooded in Harvey 1999 F350 Dually 2005 GMC Sierra 4.8 RCSB 2014 Explorer (wifes) My build :http://67-72chevytrucks.com/vboard/s...d.php?t=399148 Build #2: http://67-72chevytrucks.com/vboard/s...d.php?t=653583

11-06-2012, 06:25 PM	#18
bigboybodry Registered User Join Date: Jul 2009 Location: Florence,Mississippi Posts: 301	Re: Going to shoot the old truck this weekend! Thanks looking forward to tuning both kits and getting everything dialed in! __________________ first track pass with the new motor on motor http://youtu.be/YgrJaEF_TaQ



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.