CA '68 C10 long fleet ready to part. - Page 5 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

68shortfleet · 08-21-2012, 12:32 AM

Jerry
I am looking for the bracket that the driveline carrier bearing bolts to(riveted to frame), and the rear cross member of the frame(riveted). My rear crossmember is extremely bent.

Blackcobrajay · 08-22-2012, 01:05 PM

Quote:

Originally Posted by Jerry Jones

I think it is there, I will hack away... what exactly do you need? just the connector and wire on both sides?

I am soaking the bolts, they are being stubborn.

The plastic box has a hole on the corner (easily patched), the rest was working when the truck was retired.

Price shipped to 93906 please? Pics?
Posted via Mobile Device

jwodahl · 08-22-2012, 03:13 PM

i'll take the dual horns if you still have them(with that jumper wire).. and i never did hear back from you on the core support under the battery...

CHILLDADDY · 08-23-2012, 08:12 PM

By any chance would you have an automatic transmission crossmember, and if so how much shipped t 77013. thanks

Jerry Jones · 08-24-2012, 01:12 AM

Quote:

Originally Posted by 68shortfleet

Jerry
I am looking for the bracket that the driveline carrier bearing bolts to(riveted to frame), and the rear cross member of the frame(riveted). My rear crossmember is extremely bent.

I will see what condition they are in this weekend

Quote:

Originally Posted by Blackcobrajay

Price shipped to 93906 please? Pics?
Posted via Mobile Device

I will see if I can pull it this weekend

Quote:

Originally Posted by jwodahl

i'll take the dual horns if you still have them(with that jumper wire).. and i never did hear back from you on the core support under the battery...

I have the horns, not sure on the jumper... the core is pretty corroded, I thought it was better than t is.

Quote:

Originally Posted by CHILLDADDY

By any chance would you have an automatic transmission crossmember, and if so how much shipped t 77013. thanks

No auto crossmember (it is a 4 speed) on this one but I might have one from my '69

Chewievette · 09-14-2012, 11:02 AM

Quote:

Originally Posted by Jerry Jones

It is all there, I was driving it before it got parked for dismantle. I will try to pull it soon and price it.

Any luck? thanks

sighlurr · 09-17-2012, 12:48 AM

Does this have a steel bed floor? If so, how straight is it on a scale 1-10, 10 being untouched and unpainted, original patina...
Posted via Mobile Device

SweetandLong68 · 09-23-2012, 05:56 PM

PM sent

thanks
CHRIS

Jerry Jones · 10-12-2012, 12:31 AM

Bump

Chewievette · 10-12-2012, 01:00 AM

Quote:

Originally Posted by Jerry Jones

It is all there, I was driving it before it got parked for dismantle. I will try to pull it soon and price it.

Quote:

Originally Posted by Chewievette

Any luck? thanks

Anything?

Jerry Jones · 10-12-2012, 01:08 AM

Quote:

Originally Posted by Chewievette

Anything?

My apologies, I thought I responded but everything on the linkage is not even close to being stock, it was horribly homemade. It worked fine for me but I would not be comfortable selling it.

Chewievette · 10-12-2012, 01:14 AM

No worries, I totally understand.

Jerry Jones · 11-02-2012, 12:05 PM

Bump up.

camrycurt · 11-02-2012, 01:15 PM

Do you still have the floor shift column and the steering wheel?

If yes, could you post up a pic of the wheel? What is the condition like under that wrap? Any cracks, etc.? Do you have the horn button?

What is your shipped price on the column and wheel to 20176?

Thanks!

Jerry Jones · 11-02-2012, 07:35 PM

Quote:

Originally Posted by camrycurt

Do you still have the floor shift column and the steering wheel?

If yes, could you post up a pic of the wheel? What is the condition like under that wrap? Any cracks, etc.? Do you have the horn button?

What is your shipped price on the column and wheel to 20176?

Thanks!

Here is what it looks like, there are cracks at the hub and chips at the back of the hub. The wheel itself looks really good under the wrap. I will take $100 for both plus shipping, and if you are interested I will pull them tomorrow and figure shipping.

Jerry Jones · 11-04-2012, 06:35 PM

Quote:

Originally Posted by Jerry Jones

Here is what it looks like, there are cracks at the hub and chips at the back of the hub. The wheel itself looks really good under the wrap. I will take $100 for both plus shipping, and if you are interested I will pull them tomorrow and figure shipping.

If I ship wheel and column separately, I can ship for around $50.

camrycurt · 11-06-2012, 12:24 PM

Quote:

Originally Posted by Jerry Jones

If I ship wheel and column separately, I can ship for around $50.

Hey, thanks for the shipping quote and pics but I will pass on the wheel and column.

Thanks.

Jerry Jones · 11-06-2012, 12:32 PM

No problem, thanks for looking.

69RDMo · 11-06-2012, 09:45 PM

Did you ever sell the headers?

Jerry Jones · 11-06-2012, 10:07 PM

Nope, they are still on there.

69RDMo · 11-06-2012, 10:24 PM

Quote:

Originally Posted by Jerry Jones

Nope, they are still on there.

How much for them? And where are you located in n. Cal?
Posted via Mobile Device

Jerry Jones · 11-07-2012, 07:40 PM

$75?

I am in Antioch.

08-21-2012, 12:32 AM	#101
68shortfleet Registered User Join Date: Oct 2006 Location: Dundee, Oregon Posts: 311	Re: '68 C10 long fleet ready to part. Jerry I am looking for the bracket that the driveline carrier bearing bolts to(riveted to frame), and the rear cross member of the frame(riveted). My rear crossmember is extremely bent.

08-22-2012, 03:13 PM	#103
jwodahl Registered User Join Date: Jun 2012 Location: crosby, tx Posts: 114	Re: '68 C10 long fleet ready to part. i'll take the dual horns if you still have them(with that jumper wire).. and i never did hear back from you on the core support under the battery...

08-23-2012, 08:12 PM	#104
CHILLDADDY PIMPING ON A BUDGET Join Date: Sep 2010 Location: HOUSTON,TX Posts: 64	Re: '68 C10 long fleet ready to part. By any chance would you have an automatic transmission crossmember, and if so how much shipped t 77013. thanks __________________ CHILLDADDY

09-17-2012, 12:48 AM	#107
sighlurr ______________ Join Date: Sep 2006 Location: Danville, CA Posts: 1,285	Re: '68 C10 long fleet ready to part. Does this have a steel bed floor? If so, how straight is it on a scale 1-10, 10 being untouched and unpainted, original patina... Posted via Mobile Device

09-23-2012, 05:56 PM	#108
SweetandLong68 Your UncleBen Join Date: Dec 2002 Location: Indian Trail, NC Posts: 590	Re: '68 C10 long fleet ready to part. PM sent thanks CHRIS __________________ 68 C10 shortbed -- Street/Strip

10-12-2012, 12:31 AM	#109
Jerry Jones Happy Camper Join Date: Feb 2006 Location: Northern California Posts: 8,407	Re: '68 C10 long fleet ready to part. Bump __________________ RIP El Jay! Love you brother!

10-12-2012, 01:14 AM	#112
Chewievette Registered User Join Date: Mar 2011 Location: Chattanooga, TN Posts: 63	Re: '68 C10 long fleet ready to part. No worries, I totally understand. __________________ 1968 C-10 Long Bed 307ci Automatic

11-02-2012, 12:05 PM	#113
Jerry Jones Happy Camper Join Date: Feb 2006 Location: Northern California Posts: 8,407	Re: '68 C10 long fleet ready to part. Bump up. __________________ RIP El Jay! Love you brother!

11-02-2012, 01:15 PM	#114
camrycurt Registered User Join Date: Jul 2010 Location: Leesburg, VA Posts: 420	Re: '68 C10 long fleet ready to part. Do you still have the floor shift column and the steering wheel? If yes, could you post up a pic of the wheel? What is the condition like under that wrap? Any cracks, etc.? Do you have the horn button? What is your shipped price on the column and wheel to 20176? Thanks! __________________ Curt 1970 C/10, 250 L6 with Rochester BV carb, SM465 4 speed, 3.73 open rear

11-06-2012, 12:32 PM	#118
Jerry Jones Happy Camper Join Date: Feb 2006 Location: Northern California Posts: 8,407	Re: '68 C10 long fleet ready to part. No problem, thanks for looking. __________________ RIP El Jay! Love you brother!

11-06-2012, 09:45 PM	#119
69RDMo Registered User Join Date: Oct 2012 Location: Antelope, CA Posts: 47	Re: '68 C10 long fleet ready to part. Did you ever sell the headers?

11-06-2012, 10:07 PM	#120
Jerry Jones Happy Camper Join Date: Feb 2006 Location: Northern California Posts: 8,407	Re: '68 C10 long fleet ready to part. Nope, they are still on there. __________________ RIP El Jay! Love you brother!

11-07-2012, 07:40 PM	#122
Jerry Jones Happy Camper Join Date: Feb 2006 Location: Northern California Posts: 8,407	Re: '68 C10 long fleet ready to part. $75? I am in Antioch. __________________ RIP El Jay! Love you brother!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.