What do I have (suspension)

[Nitrousbob]

The truck used to be a 2wd, the last owner converted it a while back
My end result is I want another 4" in height and a softer ride, its a 3/4 ton right now and I dont do any towing

Here is a couple pictures, It looks like 4" blocks in the back, and the front springs look almost flat across, i believe the front suspension was taken from a suburban?

I was looking into a tuff country 4" lift, I just dont know if the rear springs would be the right height if I just went to the 4x4 springs with 4" lift , same question with the front.

not to mention replacing the 2piece driveshaft

[b454rat]

It looks like the truck has 4" on it now. The front springs are soft rides, or they wouldn't be arched like that. If you want more lift, gotta go with 6 or 8". If you go with 6", you can use your stock steering setup, go bigger really should go with crossover...

[Nitrousbob]

I just thought with front springs like that , it would be 0" and the back was compensated from being a low 2wd truck? idk , its definitely shorter than other trucks ive seen with 4" lifts or it seems that way. thanks

[MTCK]

Those don't look like 4" front springs to me... Maybe 2"? That would make more sense with a 4" block leveling out your 2wd rear.
Posted via Mobile Device

[Mike C]

Looks like a 2 1/2" lift to me. You can see the part # on one of the leafs around the spring eye. Google that #. Looks like Rancho but they kind of all look the same. Driveshafts should be fine with a 4", but chances are would need lengthening with a 6".