Steel Wheeled 4x4's?? - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*72longbed* · 09-29-2012, 08:22 AM

Thanks for the Stockton info, ... but I think having custom wheels made will cost more than buying off the shelf? I could be wrong ... didn't check into it yet. If somebody else on here wants to do a little 'price shopping' , see what they will charge for a 16 x 8" , 8 lug steel wheel that accepts 3/4 ton factory hubcaps, in White powdercoat finish. That will tell the story. I'll bet 160.00 a piece. Where are they located ... California? Shipping?

Check it out and let me know.

72

1985-GMC · 09-29-2012, 12:56 PM

Here are Beelzeburb's wheels: http://67-72chevytrucks.com/vboard/s...&postcount=133

Quote:

Originally Posted by Beelzeburb

Well, it depends what width you want. Mine are 16x10 which cost 126.96 ea. They come standard painted satin black, or you can request bare steel for no extra cost. The powdercoating alone cost an additional $45 per wheel. I could have saved $20 having them shipped to me in bare steel and letting a local shop powdercoat them, but it was more convenient letting Wheel Vintiques do it all in one shot. Of course, shipping is additional on top of everything else. It'd be a little cheaper to go with an 8" width. Actually, both the 7" and 8" ones are listed on Summit Racing's website, already painted white. Of course, all you have to do is call Wheel Vintiques on the phone and they'll be happy to get you the latest price, or contact one of the many dealers listed on their website.

perro13 · 10-23-2012, 12:46 AM

Here's my 65 Burban

**allchevy58** · 10-31-2012, 12:47 AM

Mine with 8X16 Wheel Vintiques.

*72longbed* · 10-31-2012, 09:42 AM

I don't think they look very good on your truck.

You need to take those off right away and sell them to me, so you can get other wheels on there.

Seriously ... if you don't mind sharing, what did it end up costing you to get them in WHITE from Wheel Vintiques?

Thanks,

72longbed

**allchevy58** · 10-31-2012, 11:24 PM

Quote:

Originally Posted by 72longbed

I don't think they look very good on your truck.

You need to take those off right away and sell them to me, so you can get other wheels on there.

Seriously ... if you don't mind sharing, what did it end up costing you to get them in WHITE from Wheel Vintiques?

Thanks,

72longbed

I ordered them at Summit Racing, they matched Wheel Vintiques price at 106.95 and their description and picture showed them to be white, plus no shipping since they have a store here. They showed up black, talked manager and all they could do was reorder and charge me $45.00 more each for white wheels. I had them powder coated white in town for $140.00. In an online survey I told them I wasn't very happy and a couple weeks later they gave me a $100.00 gift card. Almost paid for the powder coating.

vectorit · 10-31-2012, 11:52 PM

Quote:

Originally Posted by perro13

Here's my 65 Burban

Very nice!
Do you have a build thread here to where I can see and read more about it?

belldar · 11-04-2012, 12:07 AM

First time trying to post a pic. Hope it works!

88 1 ton with pro comp 52s. They are 16x8 with 2.5 inch backspacing. Stick out like the 10 inch rims but keep the 8 inch size. Awesome so far.

dougo · 11-07-2012, 01:11 AM

kelsey hayes...

1972K20 · 11-07-2012, 02:02 AM

My K20:

vectorit · 11-07-2012, 02:08 AM

Quote:

Originally Posted by dougo

kelsey hayes...

My favorite GMC Suburban!

POS1 · 11-07-2012, 01:12 PM

Quote:

Originally Posted by allchevy58

Mine with 8X16 Wheel Vintiques.

What size tires you using?
Posted via Mobile Device

budman k20 · 11-07-2012, 05:25 PM

I'm ready to buy (4) white 16x8 series 82 white steel wheels! Anyone else want to try for a group purchase? The extra $45.00 per wheel they charge for white powder coating is stupid it must cost the same for white powder coat as black! I will contact Wheel Vintigues to see if they will knock off the extra $45.00 for white and how many wheels we would have to buy.

dougo · 11-07-2012, 10:09 PM

Quote:

Originally Posted by vectorit

My favorite GMC Suburban!

Thanks, Chris. I can say the same for yours... My favorite Chevrolet Suburban! Love the year, color.
Posted via Mobile Device
Posted via Mobile Device

**allchevy58** · 11-08-2012, 11:51 PM

Quote:

Originally Posted by POS1

What size tires you using?
Posted via Mobile Device

I bought a set of 285/75R16's, looked real good but rubbed on the left front, so came down to 265/75R16.

tp85 · 11-09-2012, 08:39 AM

might be game.

Quote:

Originally Posted by budman k20

I'm ready to buy (4) white 16x8 series 82 white steel wheels! Anyone else want to try for a group purchase? The extra $45.00 per wheel they charge for white powder coating is stupid it must cost the same for white powder coat as black! I will contact Wheel Vintigues to see if they will knock off the extra $45.00 for white and how many wheels we would have to buy.

martindc1 · 11-12-2012, 10:46 PM

I'll have to do some digging and find some pics, but I got a set of 16x7 Ford steel wheels that came on the 97 and earlier super duties as well as the later vans. The blue-bowtie dogdish style stainless caps snapped right on these wheels. I got set of 265/75/16 mud tires and I thought the truck looked pretty tough. The wheels had the look of the original 16.5" wheels. My goal was to get them sandblasted and powdercoated white, but a few complications put a stop to that. But I think I paid $35 per wheel.

RANDY COX · 12-10-2012, 08:01 PM

You guys are killing me with your k10-20 trucks,i miss my burbans,i gotta quit lookin at these trucks,i want i want i want just one....

Bram · 12-13-2012, 03:12 PM

67chevy1series · 12-13-2012, 05:11 PM

my 68 K10 and my 67 2wd they both have steel rims and original caps

1985-GMC · 12-13-2012, 10:31 PM

Sweet trucks Bram and Rick!

67chevy1series · 12-14-2012, 05:16 PM

thanks! hopefully they will both get painted soon

**argonaut** · 12-15-2012, 01:15 AM

noco-k5 · 12-15-2012, 02:14 AM

Here is mine wheels, bumpers, and spare tire carrier all powder coated flat black.

snakester · 12-16-2012, 11:27 PM

Quote:

Originally Posted by ChevySean79

I think steel wheels are the the best looking wheels on these trucks awesome thread. My 78 k20 turned k30 with restored kelsey hayes 16.5x9.75's BFG 37's. Can't wait to finish this thing so i can put them on.

lookin to get 37s for mine you mind if i ask how much you get those for?

09-29-2012, 08:22 AM	#51
72longbed Account Suspended Join Date: Jun 2003 Location: PA Posts: 1,411	Re: Steel Wheeled 4x4's?? Thanks for the Stockton info, ... but I think having custom wheels made will cost more than buying off the shelf? I could be wrong ... didn't check into it yet. If somebody else on here wants to do a little 'price shopping' , see what they will charge for a 16 x 8" , 8 lug steel wheel that accepts 3/4 ton factory hubcaps, in White powdercoat finish. That will tell the story. I'll bet 160.00 a piece. Where are they located ... California? Shipping? Check it out and let me know. 72

10-23-2012, 12:46 AM	#53
perro13 Registered User Join Date: Dec 2008 Location: Stockton CA Posts: 2,364	Re: Steel Wheeled 4x4's?? Here's my 65 Burban

10-31-2012, 12:47 AM	#54
allchevy58 Senior Member Join Date: Aug 2011 Location: Reno, Nv. Posts: 1,437	Re: Steel Wheeled 4x4's?? Mine with 8X16 Wheel Vintiques. __________________ 1927 Willy's Knight 24,000 original miles, 1958 Impala 283/Powerglide, 1971 Monte Carlo 350/350, 1972 GMC K2500 350/350, 1976 Chev. K10 350/350, 2006 GMC Sierra 2500HD LBZ Duramax/Allison, 2006 Chev. Silverado K3500 LBZ Duramax/Allison

10-31-2012, 09:42 AM	#55
72longbed Account Suspended Join Date: Jun 2003 Location: PA Posts: 1,411	Re: Steel Wheeled 4x4's?? I don't think they look very good on your truck. You need to take those off right away and sell them to me, so you can get other wheels on there. Seriously ... if you don't mind sharing, what did it end up costing you to get them in WHITE from Wheel Vintiques? Thanks, 72longbed

11-04-2012, 12:07 AM	#58
belldar Registered User Join Date: Sep 2012 Location: New England, ND Posts: 58	Re: Steel Wheeled 4x4's?? First time trying to post a pic. Hope it works! 88 1 ton with pro comp 52s. They are 16x8 with 2.5 inch backspacing. Stick out like the 10 inch rims but keep the 8 inch size. Awesome so far.

11-07-2012, 01:11 AM	#59
dougo Registered User Join Date: Feb 2010 Location: Southern California Posts: 543	Re: Steel Wheeled 4x4's?? kelsey hayes... Attached Images __________________ Doug '72 GMC K2500 Suburban 4x4

11-07-2012, 02:02 AM	#60
1972K20 Registered User Join Date: Nov 2010 Location: Alabama Posts: 740	Re: Steel Wheeled 4x4's?? My K20:

11-07-2012, 05:25 PM	#63
budman k20 1972 K20 Join Date: Apr 2008 Location: Greenfield MN Posts: 360	Re: Steel Wheeled 4x4's?? I'm ready to buy (4) white 16x8 series 82 white steel wheels! Anyone else want to try for a group purchase? The extra $45.00 per wheel they charge for white powder coating is stupid it must cost the same for white powder coat as black! I will contact Wheel Vintigues to see if they will knock off the extra $45.00 for white and how many wheels we would have to buy.

11-12-2012, 10:46 PM	#67
martindc1 Registered User Join Date: Jul 2009 Location: La Crosse, WI Posts: 218	Re: Steel Wheeled 4x4's?? I'll have to do some digging and find some pics, but I got a set of 16x7 Ford steel wheels that came on the 97 and earlier super duties as well as the later vans. The blue-bowtie dogdish style stainless caps snapped right on these wheels. I got set of 265/75/16 mud tires and I thought the truck looked pretty tough. The wheels had the look of the original 16.5" wheels. My goal was to get them sandblasted and powdercoated white, but a few complications put a stop to that. But I think I paid $35 per wheel. __________________ Currently truckless, previous trucks: 67 K20, 87 K10 aka V10 & 72 C10

12-10-2012, 08:01 PM	#68
RANDY COX Registered User Join Date: Mar 2001 Location: RADFORD, VA Posts: 2,651	Re: Steel Wheeled 4x4's?? You guys are killing me with your k10-20 trucks,i miss my burbans,i gotta quit lookin at these trucks,i want i want i want just one.... __________________ 1964 BBC 402 4x4

12-13-2012, 03:12 PM	#69
Bram Broke Join Date: Aug 2001 Location: West Plains,MO Posts: 385	Re: Steel Wheeled 4x4's?? __________________ 72CheyenneSuper1ton4x4BigBlock

12-13-2012, 05:11 PM	#70
67chevy1series Registered User Join Date: Mar 2010 Location: a t w a t e r cali 95301 Posts: 10,713	Re: Steel Wheeled 4x4's?? my 68 K10 and my 67 2wd they both have steel rims and original caps Attached Images

12-13-2012, 10:31 PM	#71
1985-GMC Chevy Enthusiast Join Date: Jul 2009 Location: Canyon Lake Texas Posts: 2,024	Re: Steel Wheeled 4x4's?? Sweet trucks Bram and Rick! __________________ Tony 1985 GMC K2500 restoration Project: Rust, White & Blue 1989 Chevy R3500 CC Cummins & 4X4 swap some day... 1989 Burb (D60, 14BFF, 12V, NV4500, NP205, 37" tires in progress)

12-14-2012, 05:16 PM	#72
67chevy1series Registered User Join Date: Mar 2010 Location: a t w a t e r cali 95301 Posts: 10,713	Re: Steel Wheeled 4x4's?? thanks! hopefully they will both get painted soon

12-15-2012, 01:15 AM	#73
argonaut Senior Member Join Date: Aug 2008 Location: Long Beach, CA Posts: 1,813	Re: Steel Wheeled 4x4's?? __________________ Jason M. @argonaut62 1972 K5 Blazer CST, Turquoise 1966 K20 Short Fleet Pickup, Big Ugly 1964 C10 Short Fleet, Gertrude 2001 Porsche 911 Carrera 1996 Ford Bronco XLT 1980 Jeep Wagoneer 2008 Honda CBR1000RR 2005 Honda RC51 1981 Honda CB750C No dis-assemble Johnny Five! No dis-assemble!



Register or Log In To remove these advertisements.

12-15-2012, 02:14 AM	#74
noco-k5 Registered User Join Date: Mar 2012 Location: Colorado Posts: 138	Re: Steel Wheeled 4x4's?? Here is mine wheels, bumpers, and spare tire carrier all powder coated flat black.

Register or Log In To remove these advertisements.