CA Newer Serpentine Drive Belt setup - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jays68yak · 11-02-2012, 01:07 AM

Off of a 91 suburban. Should fit all SBC engines as long as you have the accessory bolt holes in the heads. Including all the bolts and water pump. The alt is new (with in the last year).

$200 plus shipping..obo

I will include the whole engine for another $40 if you want to pick it up in CA, 95020. The TBI stuff is gone.

454C10CHEVY · 11-02-2012, 04:40 PM

Anything wrong with the engine?

jays68yak · 11-02-2012, 04:50 PM

I pulled it from a running driving 91 suburban 2 months ago. I was trying to sell the whole thing, then sold the tbi stuff. Had a few people day they were gonna come get it as it sits....they flaked. I've had a towel over the top the whole time.
Posted via Mobile Device

454C10CHEVY · 11-02-2012, 04:55 PM

about how many miles on it?

jays68yak · 11-02-2012, 05:13 PM

To be honest I dont know. I think the cluster said something around 160k, but it didnt have factory intake gaskets, and IIRC the inside looked pretty good. Altho I havnt pulled a valve cover or the oil pan.

jays68yak · 11-02-2012, 05:15 PM

Tell you what...if you want it...Give me $200 for it all as it sits (no intake and no tbi stuff. And pick it up tomorrow or tonight. Its on a crate and in the bed of my truck and I would rather not dig my cherry picker out to put it back in my garage.

454C10CHEVY · 11-02-2012, 06:30 PM

i drive by there when i go pick up my son on weekends its usually late at night i can stop by sat at around 6-7 or sunday after about 5 i wouldnt be able to pick up this weekend it would be next but i could stop and leave a deposit if all works out

jays68yak · 11-02-2012, 09:03 PM

Ill pm you my cell number, give me a call and come check it out.

454C10CHEVY · 11-06-2012, 07:28 PM

Sorry i couldnt make it out there this weekend got rearended over the weekend so i wont be able to go out there for a couple weeks...
Bump for ya tho

jays68yak · 11-10-2012, 12:52 PM

Quote:

Originally Posted by 454C10CHEVY

Sorry i couldnt make it out there this weekend got rearended over the weekend so i wont be able to go out there for a couple weeks...
Bump for ya tho

That sucks. Hope everyone is ok.

I sold the drive setup, still have the long block tho.

11-02-2012, 01:07 AM	#1
jays68yak Registered User Join Date: Oct 2002 Location: Gilroy, CA Posts: 1,454	Newer Serpentine Drive Belt setup Off of a 91 suburban. Should fit all SBC engines as long as you have the accessory bolt holes in the heads. Including all the bolts and water pump. The alt is new (with in the last year). $200 plus shipping..obo I will include the whole engine for another $40 if you want to pick it up in CA, 95020. The TBI stuff is gone. Attached Images __________________ 1969 Chevy Project SWB Fleet, 20s, 5.3, t56, in the weeds. 1970 Chevy Truck cab on a 1979 Jimmy frame-8.1 liter 496 bbc/sm465/np203-jeds doubler-np205/d60/14bff Welded/42 tsls on recentered H1s 1998 Chevy Crew Cab K3500 SAS'd with hpd60, links and swayaway coilovers. 8.1l vortec DD/towrig "I like long walks, especially when they are taken by people who annoy me. "

11-02-2012, 04:40 PM	#2
454C10CHEVY Registered User Join Date: Aug 2012 Location: Midland,Tx Posts: 103	Re: Newer Serpentine Drive Belt setup Anything wrong with the engine? __________________ 72 C10 SWB Stepper 350/TH400 (might sell) 70 C10 SWB Stepper I6/4SPD (CURRENT PROJECT) 00 Silverado Rc 1500 2WD 5.3 09 Silverado Cc 5.3 2WD 4/6 DROP 04 Silverado ext 5.3 4WD

11-02-2012, 04:50 PM	#3
jays68yak Registered User Join Date: Oct 2002 Location: Gilroy, CA Posts: 1,454	Re: Newer Serpentine Drive Belt setup I pulled it from a running driving 91 suburban 2 months ago. I was trying to sell the whole thing, then sold the tbi stuff. Had a few people day they were gonna come get it as it sits....they flaked. I've had a towel over the top the whole time. Posted via Mobile Device __________________ 1969 Chevy Project SWB Fleet, 20s, 5.3, t56, in the weeds. 1970 Chevy Truck cab on a 1979 Jimmy frame-8.1 liter 496 bbc/sm465/np203-jeds doubler-np205/d60/14bff Welded/42 tsls on recentered H1s 1998 Chevy Crew Cab K3500 SAS'd with hpd60, links and swayaway coilovers. 8.1l vortec DD/towrig "I like long walks, especially when they are taken by people who annoy me. "

11-02-2012, 04:55 PM	#4
454C10CHEVY Registered User Join Date: Aug 2012 Location: Midland,Tx Posts: 103	Re: Newer Serpentine Drive Belt setup about how many miles on it? __________________ 72 C10 SWB Stepper 350/TH400 (might sell) 70 C10 SWB Stepper I6/4SPD (CURRENT PROJECT) 00 Silverado Rc 1500 2WD 5.3 09 Silverado Cc 5.3 2WD 4/6 DROP 04 Silverado ext 5.3 4WD

11-02-2012, 05:13 PM	#5
jays68yak Registered User Join Date: Oct 2002 Location: Gilroy, CA Posts: 1,454	Re: Newer Serpentine Drive Belt setup To be honest I dont know. I think the cluster said something around 160k, but it didnt have factory intake gaskets, and IIRC the inside looked pretty good. Altho I havnt pulled a valve cover or the oil pan. __________________ 1969 Chevy Project SWB Fleet, 20s, 5.3, t56, in the weeds. 1970 Chevy Truck cab on a 1979 Jimmy frame-8.1 liter 496 bbc/sm465/np203-jeds doubler-np205/d60/14bff Welded/42 tsls on recentered H1s 1998 Chevy Crew Cab K3500 SAS'd with hpd60, links and swayaway coilovers. 8.1l vortec DD/towrig "I like long walks, especially when they are taken by people who annoy me. "

11-02-2012, 05:15 PM	#6
jays68yak Registered User Join Date: Oct 2002 Location: Gilroy, CA Posts: 1,454	Re: Newer Serpentine Drive Belt setup Tell you what...if you want it...Give me $200 for it all as it sits (no intake and no tbi stuff. And pick it up tomorrow or tonight. Its on a crate and in the bed of my truck and I would rather not dig my cherry picker out to put it back in my garage. __________________ 1969 Chevy Project SWB Fleet, 20s, 5.3, t56, in the weeds. 1970 Chevy Truck cab on a 1979 Jimmy frame-8.1 liter 496 bbc/sm465/np203-jeds doubler-np205/d60/14bff Welded/42 tsls on recentered H1s 1998 Chevy Crew Cab K3500 SAS'd with hpd60, links and swayaway coilovers. 8.1l vortec DD/towrig "I like long walks, especially when they are taken by people who annoy me. "

11-02-2012, 06:30 PM	#7
454C10CHEVY Registered User Join Date: Aug 2012 Location: Midland,Tx Posts: 103	Re: Newer Serpentine Drive Belt setup i drive by there when i go pick up my son on weekends its usually late at night i can stop by sat at around 6-7 or sunday after about 5 i wouldnt be able to pick up this weekend it would be next but i could stop and leave a deposit if all works out __________________ 72 C10 SWB Stepper 350/TH400 (might sell) 70 C10 SWB Stepper I6/4SPD (CURRENT PROJECT) 00 Silverado Rc 1500 2WD 5.3 09 Silverado Cc 5.3 2WD 4/6 DROP 04 Silverado ext 5.3 4WD

11-02-2012, 09:03 PM	#8
jays68yak Registered User Join Date: Oct 2002 Location: Gilroy, CA Posts: 1,454	Re: Newer Serpentine Drive Belt setup Ill pm you my cell number, give me a call and come check it out. __________________ 1969 Chevy Project SWB Fleet, 20s, 5.3, t56, in the weeds. 1970 Chevy Truck cab on a 1979 Jimmy frame-8.1 liter 496 bbc/sm465/np203-jeds doubler-np205/d60/14bff Welded/42 tsls on recentered H1s 1998 Chevy Crew Cab K3500 SAS'd with hpd60, links and swayaway coilovers. 8.1l vortec DD/towrig "I like long walks, especially when they are taken by people who annoy me. "

11-06-2012, 07:28 PM	#9
454C10CHEVY Registered User Join Date: Aug 2012 Location: Midland,Tx Posts: 103	Re: Newer Serpentine Drive Belt setup Sorry i couldnt make it out there this weekend got rearended over the weekend so i wont be able to go out there for a couple weeks... Bump for ya tho __________________ 72 C10 SWB Stepper 350/TH400 (might sell) 70 C10 SWB Stepper I6/4SPD (CURRENT PROJECT) 00 Silverado Rc 1500 2WD 5.3 09 Silverado Cc 5.3 2WD 4/6 DROP 04 Silverado ext 5.3 4WD



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.