stepside tonneou cover - The 1947 - Present Chevrolet & GMC Truck Message Board Network

54belair · 11-11-2012, 03:56 PM

Didnt have much luck with the link--but on Ebay I just found a neat looking cover for a step side

ebay #281009605787

This is the first one that Ive seen that I might do.

Tinkermc · 11-11-2012, 06:47 PM

lools ok

**70cst** · 11-11-2012, 08:46 PM

http://www.ebay.com/itm/281009605787...787%26_rdc%3D1

Here you go ...

mixermike · 11-11-2012, 10:19 PM

You can get a better price and cheaper shipping by going to CRAFTEC's website
Posted via Mobile Device

cubber · 11-12-2012, 02:33 AM

Thats an idea. I've been looking for a place to put my air management system.

TobyArnot · 11-12-2012, 07:57 AM

Look here Post #5.
http://67-72chevytrucks.com/vboard/s...d.php?t=526022

54belair · 11-12-2012, 10:41 AM

Darn Toby, you busted my bubble----I thought I had made an original find (lol).

Thanks for posting the link to the previous thread.

Ive got to call them and see if they can give me exact drilling instructions---I wont drill after I paint!! (and would prefer not to buy ahead of time).

TobyArnot · 11-12-2012, 12:47 PM

Go to their website and download (pdf) the installation instructions.
.
https://www.craftecinc.com/media/24575_soft_BROCH.pdf

mooneyes · 11-12-2012, 08:32 PM

Posted via Mobile Device
...love my craftec tonneau.....
Posted via Mobile Device

54belair · 11-13-2012, 10:15 AM

Mooneyes,,,

Have you had it on long enough so far to tell if there is any wiggle/vibration in the unit frame that would abraid the paint?
Im going to be doing my truck in a three stage candy apple paint----not looking forward to deep scuffs/scratches that would require further paint.

Sammy · 11-13-2012, 10:36 AM

Haven't had any problems with that personally. The holes you drill is to hold the lead piece at the front. Sheet metal size and I think three. Unless you also drill the holes for the hold down on each inside for the latches. I never drilled those and just removed a floor strip bolt and used a bungy cord through a eye bolt. With new bedsides didn't want any extra holes myself. Good luck and overall a decent product.

mooneyes · 11-13-2012, 10:46 PM

...no probs at all my bed is in primer right now but the plastic corners keep the aluminum off the paint and it stays nice and tight i give it two thumbs up
Posted via Mobile Device

11-11-2012, 03:56 PM	#1
54belair Registered User Join Date: Mar 2011 Location: bolivar, mo Posts: 839	stepside tonneou cover Didnt have much luck with the link--but on Ebay I just found a neat looking cover for a step side ebay #281009605787 This is the first one that Ive seen that I might do. __________________ 1997 shortie stepside 1968 short stepside 1966 mustang 1966 chevelle ss Dont always go the cheapest route--You can save yourself into the poorhouse! My Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=489030

11-11-2012, 08:46 PM	#3
70cst Senior Member Join Date: Feb 2001 Location: New Madison, Ohio Posts: 21,373	Re: stepside tonneou cover http://www.ebay.com/itm/281009605787...787%26_rdc%3D1 Here you go ... __________________ A husband can be right...or...A husband can be happy. 67-72 Chevy and GMC Trucks...The Classic Truck for the Classic Folk. 1970 CST Two tone green, 402BB, 400 Automatic, Tach, Buckets, AC, AM-FM, Tilt, GM CB, GM 8 Tract, LWB, etc JOHN 17:3...The better side of "LIFE" Remember: Everyday is a good day...Some are just gooder!

11-11-2012, 10:19 PM	#4
mixermike Registered User Join Date: Jan 2008 Location: Post Falls, Idaho Posts: 606	Re: stepside tonneou cover You can get a better price and cheaper shipping by going to CRAFTEC's website Posted via Mobile Device

11-12-2012, 07:57 AM	#6
TobyArnot Quit if it's not FUN!!! Join Date: Jul 2010 Location: Indian Trail, N.C, Posts: 864	Re: stepside tonneou cover Look here Post #5. http://67-72chevytrucks.com/vboard/s...d.php?t=526022

11-12-2012, 10:41 AM	#7
54belair Registered User Join Date: Mar 2011 Location: bolivar, mo Posts: 839	Re: stepside tonneou cover Darn Toby, you busted my bubble----I thought I had made an original find (lol). Thanks for posting the link to the previous thread. Ive got to call them and see if they can give me exact drilling instructions---I wont drill after I paint!! (and would prefer not to buy ahead of time). __________________ 1997 shortie stepside 1968 short stepside 1966 mustang 1966 chevelle ss Dont always go the cheapest route--You can save yourself into the poorhouse! My Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=489030

11-11-2012, 06:47 PM	#2
Tinkermc Registered User Join Date: Jul 2011 Location: Farmville, Va Posts: 3,026	Re: stepside tonneou cover lools ok

11-12-2012, 02:33 AM	#5
cubber Registered User Join Date: Mar 2012 Location: Leanna, TN Posts: 2,061	Re: stepside tonneou cover Thats an idea. I've been looking for a place to put my air management system. __________________ =MATTHEW 69 Stepper...Stroked & Bagged GONE BUT NOT FORGOTTEN 2003 Chevrolet Z71 Ext. Cab 1995 Cavalier gas saver!

11-12-2012, 12:47 PM	#8
TobyArnot Quit if it's not FUN!!! Join Date: Jul 2010 Location: Indian Trail, N.C, Posts: 864	Re: stepside tonneou cover Go to their website and download (pdf) the installation instructions. . https://www.craftecinc.com/media/24575_soft_BROCH.pdf

11-12-2012, 08:32 PM	#9
mooneyes Registered User Join Date: Jan 2002 Location: Slippery Rock PA USA Posts: 1,692	Re: stepside tonneou cover Posted via Mobile Device ...love my craftec tonneau..... Posted via Mobile Device Attached Images __________________ Ken Lyons, Slippery rock pa 68 short step 327 t10 4 gear 72 2wd blazer project 70 lwb 305/700r driver 78 caprice project 02 cavalier D.D ( hate it!!)

11-13-2012, 10:15 AM	#10
54belair Registered User Join Date: Mar 2011 Location: bolivar, mo Posts: 839	Re: stepside tonneou cover Mooneyes,,, Have you had it on long enough so far to tell if there is any wiggle/vibration in the unit frame that would abraid the paint? Im going to be doing my truck in a three stage candy apple paint----not looking forward to deep scuffs/scratches that would require further paint. __________________ 1997 shortie stepside 1968 short stepside 1966 mustang 1966 chevelle ss Dont always go the cheapest route--You can save yourself into the poorhouse! My Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=489030

11-13-2012, 10:36 AM	#11
Sammy Registered User Join Date: Apr 2000 Location: Bonne Terre, Mo Posts: 3,005	Re: stepside tonneou cover Haven't had any problems with that personally. The holes you drill is to hold the lead piece at the front. Sheet metal size and I think three. Unless you also drill the holes for the hold down on each inside for the latches. I never drilled those and just removed a floor strip bolt and used a bungy cord through a eye bolt. With new bedsides didn't want any extra holes myself. Good luck and overall a decent product. __________________ '69 Chevy Long Fleet & '71 GMC Short Step & Project "ODD BALL" "You can wash a pig, soak it in most expensive perfume. In the end it is still just a pig." ODD BALL build thread http://67-72chevytrucks.com/vboard/s...d.php?t=478629"

11-13-2012, 10:46 PM	#12
mooneyes Registered User Join Date: Jan 2002 Location: Slippery Rock PA USA Posts: 1,692	Re: stepside tonneou cover ...no probs at all my bed is in primer right now but the plastic corners keep the aluminum off the paint and it stays nice and tight i give it two thumbs up Posted via Mobile Device __________________ Ken Lyons, Slippery rock pa 68 short step 327 t10 4 gear 72 2wd blazer project 70 lwb 305/700r driver 78 caprice project 02 cavalier D.D ( hate it!!)



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.