Origional exhaust routing for a 63, 230

[Jargo]

Does anyone know where I can buy original exhaust pipe for the a 1963 C10 230???

Or routing diagram for exhaust?

I have tried local dealers, LMC, searched on the web no luck.

I am trying to put the truck back completely original. I have found the muffler and tail pipe although no routing diagrams or anything to have one custom made.

[72step]

Originally Posted by Jargo

Does anyone know where I can buy original exhaust pipe for the a 1963 C10 230???

Or routing diagram for exhaust?

I have tried local dealers, LMC, searched on the web no luck.

I am trying to put the truck back completely original. I have found the muffler and tail pipe although no routing diagrams or anything to have one custom made.

I have a 65 C10 230 and I remember the original basically goes straight back and exits just behind the drivers side rear tire. I don't recall exactly how it went over the rear end because I took it apart 15 years ago then my dad got it but never did anything with it but the original exhaust got lost on one of his moves. Right now I'm trying to figure out how to put together some exhaust to keep on a budget. I know oreilly sells 45 and 90 elbows and other pieces. If I could just find me the flared piece for the manifold I could easily set it up to at least behind the cab with my flux core welder. I wish I remembered what the original exhaust does at the rearend. I assume it just curves like a C like most other vehicles. Hopefully someone on here will chime in.......

[1963c-10]

I can get pics of my exhaust tomorrow. My 63's exhaust is about as stock as it came. Problem is its raining it tail off outside right now.

[72step]

Originally Posted by 1963c-10

I can get pics of my exhaust tomorrow. My 63's exhaust is about as stock as it came. Problem is its raining it tail off outside right now.

When you get a chance that would be helpful buddy! THanks...

[Turkey]

auto zone believe it or not

[Jargo]

Originally Posted by 1963c-10

I can get pics of my exhaust tomorrow. My 63's exhaust is about as stock as it came. Problem is its raining it tail off outside right now.

Thanks for the help

[sigshooter]

Walker exhaust is the brand name Oreilly, autozone and advanced all sell walker exhaust. They are the best for OEM fit pipe and mufflers...

I took these pics and had my local muffler shop do it and it was spot on except OEM is all clamp connections and the shop welded them.

[sigshooter]

you can look up walker exhaust online at the above mentioned parts stores website. about 200 bucks for all new

[Jargo]

Thanks for the pictures, I should be able to get it back to original now.

[Sharps40]

Try here.

http://www.waldronexhaust.com/