Just wondering what y'all would pay for this. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Honda85man · 11-14-2012, 02:02 PM

1972 gmc Sierra grande long wood bed. Had brand new interior put in a while back, but ha sat with no windshield and a tarp on it for years. Still in good condition just dirty. Missing left door panel. Ran great when parked, but has sat for idk how long. Big block 402 and turbo 400 tranny. Fully optioned minus vacuum gauge, and trailing arm. No front bumper or grill, and no keys. Door latch mechanism has rusted and won't open.
Posted via Mobile Device

Honda85man · 11-14-2012, 02:03 PM

I'll post pics as soon as I get home since I'm on my phone.
Posted via Mobile Device

Honda85man · 11-14-2012, 03:50 PM

pics

Honda85man · 11-14-2012, 03:57 PM

more pics

Honda85man · 11-14-2012, 03:58 PM

even more pics

Honda85man · 11-14-2012, 03:59 PM

alright so im thinking about listing it for 1500, should i do more or less?

Tinkermc · 11-14-2012, 04:22 PM

I would think less but that's MHO

99-LS1-SS · 11-14-2012, 04:25 PM

I think you could get $1500 but I can't see how it looks close up. If you got it running you could get a lot more out of it.

Honda85man · 11-14-2012, 04:29 PM

So, say I slap a new battery on it, ad get it cranked up, what would you say, 2000?
Posted via Mobile Device

99-LS1-SS · 11-14-2012, 04:44 PM

I think so if you got it running reliably. You would get a lot of return on your effort if you cleaned it up some too. Nothing to that but your time.

Honda85man · 11-14-2012, 05:34 PM

Please note that you must be a supporting member to post classified items. This includes but is not limited to What Its Worth, Want To Buy, Want To Trade, and For Sale. Please consider supporting the forum by subscribing. Further information on the subscription levels available are located here

If you need any further assistance with that please contact any Admin for help.

**LockDoc** · 11-14-2012, 07:45 PM

-
As far as the keys, as long as the door panel is off anyway pull the lock cylinder out and see if there is a code number on it. It would be stamped into the lock case. You may have to wire brush it to see the code. If there is take it to your local locksmith and have him make a key from the code #. It should fit the ignition. If there isn't a code number on the drivers side take the passengers side out and see if there is one on it.

LockDoc

sduckworth13 · 11-14-2012, 08:45 PM

Randy, would like that one..lol

ecgate · 11-14-2012, 09:46 PM

Running = $2000 no prob.

**29od1** · 11-14-2012, 09:49 PM

From the looks of the rearview mirror and the door panel strip, I'd say it is a 71 not a 72. That may or may not matter to you.

Honda85man · 11-15-2012, 11:35 AM

**** that's right! >.< haha! It's been awhile since I looked at it, as 72 just popped into my head for whatever reason. :p and maye randy should send me an email. >.> :ppp
Posted via Mobile Device

11-14-2012, 02:02 PM	#1
Honda85man Registered User Join Date: Feb 2012 Location: Lubbock, TX Posts: 25	Just wondering what y'all would pay for this. 1972 gmc Sierra grande long wood bed. Had brand new interior put in a while back, but ha sat with no windshield and a tarp on it for years. Still in good condition just dirty. Missing left door panel. Ran great when parked, but has sat for idk how long. Big block 402 and turbo 400 tranny. Fully optioned minus vacuum gauge, and trailing arm. No front bumper or grill, and no keys. Door latch mechanism has rusted and won't open. Posted via Mobile Device

11-14-2012, 02:03 PM	#2
Honda85man Registered User Join Date: Feb 2012 Location: Lubbock, TX Posts: 25	Re: Just wondering what y'all would pay for this. I'll post pics as soon as I get home since I'm on my phone. Posted via Mobile Device

11-14-2012, 03:50 PM	#3
Honda85man Registered User Join Date: Feb 2012 Location: Lubbock, TX Posts: 25	Re: Just wondering what y'all would pay for this. pics Attached Images

11-14-2012, 03:57 PM	#4
Honda85man Registered User Join Date: Feb 2012 Location: Lubbock, TX Posts: 25	Re: Just wondering what y'all would pay for this. more pics Attached Images

11-14-2012, 03:58 PM	#5
Honda85man Registered User Join Date: Feb 2012 Location: Lubbock, TX Posts: 25	Re: Just wondering what y'all would pay for this. even more pics Attached Images

11-14-2012, 03:59 PM	#6
Honda85man Registered User Join Date: Feb 2012 Location: Lubbock, TX Posts: 25	Re: Just wondering what y'all would pay for this. alright so im thinking about listing it for 1500, should i do more or less?

11-14-2012, 04:22 PM	#7
Tinkermc Registered User Join Date: Jul 2011 Location: Farmville, Va Posts: 3,026	Re: Just wondering what y'all would pay for this. I would think less but that's MHO

11-14-2012, 04:25 PM	#8
99-LS1-SS Registered User Join Date: Mar 2011 Location: Oak Ridge NC Posts: 957	Re: Just wondering what y'all would pay for this. I think you could get $1500 but I can't see how it looks close up. If you got it running you could get a lot more out of it. __________________ My 1972 2WD Blazer build 1984 K10 beater truck

11-14-2012, 04:29 PM	#9
Honda85man Registered User Join Date: Feb 2012 Location: Lubbock, TX Posts: 25	Re: Just wondering what y'all would pay for this. So, say I slap a new battery on it, ad get it cranked up, what would you say, 2000? Posted via Mobile Device

11-14-2012, 04:44 PM	#10
99-LS1-SS Registered User Join Date: Mar 2011 Location: Oak Ridge NC Posts: 957	Re: Just wondering what y'all would pay for this. I think so if you got it running reliably. You would get a lot of return on your effort if you cleaned it up some too. Nothing to that but your time. __________________ My 1972 2WD Blazer build 1984 K10 beater truck

11-14-2012, 05:34 PM	#11
Honda85man Registered User Join Date: Feb 2012 Location: Lubbock, TX Posts: 25	Re: Just wondering what y'all would pay for this. Please note that you must be a supporting member to post classified items. This includes but is not limited to What Its Worth, Want To Buy, Want To Trade, and For Sale. Please consider supporting the forum by subscribing. Further information on the subscription levels available are located here If you need any further assistance with that please contact any Admin for help.

11-14-2012, 07:45 PM	#12
LockDoc The Older Generation Join Date: Aug 2006 Location: Montezuma, Iowa Posts: 25,818	Re: Just wondering what y'all would pay for this. - As far as the keys, as long as the door panel is off anyway pull the lock cylinder out and see if there is a code number on it. It would be stamped into the lock case. You may have to wire brush it to see the code. If there is take it to your local locksmith and have him make a key from the code #. It should fit the ignition. If there isn't a code number on the drivers side take the passengers side out and see if there is one on it. LockDoc __________________ Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 -

11-14-2012, 08:45 PM	#13
sduckworth13 Registered User Join Date: Mar 2011 Location: Kansas City, Missouri Posts: 3,541	Re: Just wondering what y'all would pay for this. Randy, would like that one..lol __________________ Scott

11-14-2012, 09:46 PM	#14
ecgate Registered User Join Date: Aug 2012 Location: Council Bluffs, Iowa Posts: 280	Re: Just wondering what y'all would pay for this. Running = $2000 no prob.

11-14-2012, 09:49 PM	#15
29od1 Registered User Join Date: Oct 2006 Location: Wichita, Kansas Posts: 1,050	Re: Just wondering what y'all would pay for this. From the looks of the rearview mirror and the door panel strip, I'd say it is a 71 not a 72. That may or may not matter to you.



Register or Log In To remove these advertisements.

11-15-2012, 11:35 AM	#16
Honda85man Registered User Join Date: Feb 2012 Location: Lubbock, TX Posts: 25	Re: Just wondering what y'all would pay for this. **** that's right! >.< haha! It's been awhile since I looked at it, as 72 just popped into my head for whatever reason. :p and maye randy should send me an email. >.> :ppp Posted via Mobile Device

Register or Log In To remove these advertisements.