Camel hump heads and power steering questions - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Tshort1 · 11-16-2012, 05:42 PM

I have a 1967 short bed with a 327 and camel hump heads. I can not figure out how I can mount a power steering pump to my engine. is there special brackets I need? Any ideas or pictures of the same set up would be greatly appreciated.

geezer#99 · 11-16-2012, 05:52 PM

If you don't find a factory set up then try here.
http://www.alangrovecomponents.com/S...Short_Pump.htm

vectorit · 11-16-2012, 07:04 PM

You can go with a 1970 style like what I have.

Tshort1 · 11-16-2012, 07:30 PM

Cool thanks for the info.

**john** · 11-16-2012, 08:22 PM

Here's a pic.

jd7 · 11-17-2012, 03:33 PM

i will take some pics Monday. I am running a 350 in a 69 with camel back heads.

GASoline71 · 11-17-2012, 04:41 PM

Or drill and tap the heads to accept accessories. Main drawback of those heads is no accessorie bolt holes for street rigs.

Gary

GRX · 11-17-2012, 04:46 PM

Great advice. Try for a newer style set up.

Quote:

Originally Posted by GASoline71

Or drill and tap the heads to accept accessories. Main drawback of those heads is no accessory bolt holes for street rigs.

Gary

I have done that on customer's older camel heads on occasion. Problem with these is no flat pads with extra meat on the ends so drill depth is critical.

Tshort1 · 11-17-2012, 07:15 PM

Thanks for the info guys! I got it mounted today and it is all looking good..

GRX · 11-17-2012, 07:58 PM

Quote:

Originally Posted by Tshort1

Thanks for the info guys! I got it mounted today and it is all looking good..

Right on!

11-16-2012, 05:42 PM	#1
Tshort1 Registered User Join Date: Feb 2012 Location: Pikeville, NC Posts: 144	Camel hump heads and power steering questions I have a 1967 short bed with a 327 and camel hump heads. I can not figure out how I can mount a power steering pump to my engine. is there special brackets I need? Any ideas or pictures of the same set up would be greatly appreciated.

11-16-2012, 05:52 PM	#2
geezer#99 Registered User Join Date: Aug 2009 Location: Bowser Posts: 13,616	Re: Camel hump heads and power steering questions If you don't find a factory set up then try here. http://www.alangrovecomponents.com/S...Short_Pump.htm

11-16-2012, 07:04 PM	#3
vectorit What? Join Date: Jun 2007 Location: Southern California Posts: 7,617	Re: Camel hump heads and power steering questions You can go with a 1970 style like what I have. Attached Images __________________ Chris 1968 K20 Suburban 1972 K10 LWB PU

11-16-2012, 07:30 PM	#4
Tshort1 Registered User Join Date: Feb 2012 Location: Pikeville, NC Posts: 144	Re: Camel hump heads and power steering questions Cool thanks for the info.

11-16-2012, 08:22 PM	#5
john member #16 Join Date: Dec 1999 Location: Yuba City Ca. Posts: 3,618	Re: Camel hump heads and power steering questions Here's a pic. Attached Images __________________ john http://67-72chevytrucks.com/vboard/showgroups.php board vendors http://www.flickr.com/photos/1745471...7602865984234/

11-17-2012, 03:33 PM	#6
jd7 Registered User Join Date: Sep 2012 Location: canoga park, ca. Posts: 120	Re: Camel hump heads and power steering questions i will take some pics Monday. I am running a 350 in a 69 with camel back heads.

11-17-2012, 07:15 PM	#9
Tshort1 Registered User Join Date: Feb 2012 Location: Pikeville, NC Posts: 144	Re: Camel hump heads and power steering questions Thanks for the info guys! I got it mounted today and it is all looking good..



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.