What size of screw holds on the chrome doorsill plates? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**passthebuck** · 10-22-2003, 04:26 AM

The title sez it all - What size of screw holds on the chrome doorsill plates? I need to know because I got new ones & the old screws arent comming out so I'll have to grind them off. Thanx.

Lippyp · 10-22-2003, 06:57 AM

I used some small button head bolts (the kind you use a hex key to tighten up) with washers and nuts underneath. Looks good, the only problem is I wanted stainless but couldn't find any at the time so had to have blacked ones. I'll be replacing them with stainless when I do the interior over this winter.

10-22-2003, 04:26 AM	#1
passthebuck Sisyphus was my mentor! Join Date: Sep 2002 Location: Carleton Place, Ontario CANADA Posts: 984	What size of screw holds on the chrome doorsill plates? The title sez it all - What size of screw holds on the chrome doorsill plates? I need to know because I got new ones & the old screws arent comming out so I'll have to grind them off. Thanx. __________________ passthebuck #5642 -TWO 1967 GMC 910's. One with L6/3-on-the tree and the other with 355 w/435hp & a 700r4. -a 2013 Honda Civic as my "sensible" car

10-22-2003, 06:57 AM	#2
Lippyp English Chevy Owner Join Date: May 2002 Location: Shropshire, UK/ Lot, France Posts: 1,848	I used some small button head bolts (the kind you use a hex key to tighten up) with washers and nuts underneath. Looks good, the only problem is I wanted stainless but couldn't find any at the time so had to have blacked ones. I'll be replacing them with stainless when I do the interior over this winter. __________________ Phil '67 C10 long fleet. 350/TH350, 4 bbl Carter, K&N, Dual exhaust, loads of stuff coming soon 2001 S10 Blazer Daily Driver, bone stock 4 door 4x4 with manual transmission



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.