AZ 81 1 ton 4x4 for parts - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**special-K** · 04-16-2011, 11:35 AM

Could I buy those white mirrors off the '89?

K30_dump · 04-21-2011, 09:09 AM

Tom,

Not sure if you've had any takers on the frame yet, but I'm still in search of a set of rear spring hangers....

Let me know, thanks

Joe

**t korinek** · 04-21-2011, 10:09 AM

Special-K I think I have the complete 89 truck sold

K30 dump, looking like that frame is going to be available for parts, it wouldn't happen till late next week.

duallyjams I have a 205 for a 400 with the adapter, its the figure 8 style & is not a slip yoke $475 + shipping if interested, shipping probably around $100

K30_dump · 04-21-2011, 10:17 AM

PM sent...

Joe
Posted via Mobile Device

**special-K** · 04-21-2011, 06:11 PM

Let me know if your deal falls through on the '89. I'm interested in it...thanks

duallyjams · 04-22-2011, 08:58 AM

Figure 8 are everywhere on cl for 100. The 89 had the round 6 bolt pattern.Much easier to sell the hole truck.Thanks anyway.

**t korinek** · 04-22-2011, 10:00 AM

If you can find 32 spline turbo 400 205s with adapters all day long on cl for $100 you should be buying all of them, they are hard to come by here.

K30_dump · 04-22-2011, 04:04 PM

Quote:

Originally Posted by t korinek

If you can find 32 spline turbo 400 205s with adapters all day long on cl for $100 you should be buying all of them, they are hard to come by here.

Agreed. I've NEVER seen the adapter alone sell for less than $150, let alone an entire case...

Joe
Posted via Mobile Device

D O C · 05-01-2011, 10:15 PM

Do you have any driveshafts from a k30 400/205 fixed yoke?
could pm me if you do
thanks

Western1 · 06-13-2011, 11:58 PM

Interested in the wheels. Think they are stock 16.5x9.75? Rears different from fronts? Thanks
Posted via Mobile Device

1985-GMC · 06-28-2011, 09:30 PM

Whats your best price on the complete A\C system shipped to 78133?

bikes&bowties · 07-11-2011, 11:59 PM

How much for the front spring hangers shipped to 98848?

**t korinek** · 07-12-2011, 12:14 AM

That truck is long gone.
Thanks
Tom
Posted via Mobile Device

**old Rusty C10** · 08-20-2011, 09:36 PM

does it have a tilt steering column with automatic trans if so shipped to 08859 minus steering wheel

Sandemonium · 10-25-2012, 03:09 PM

Tom,

Is the fuel filler still available?

If so, what are you asking for it?

Thank you,

Bob
Posted via Mobile Device

**t korinek** · 10-25-2012, 04:47 PM

No Bob, fuel filler & the rest of the truck are long gone, I probably have a 72 blazer fuel neck if that would work.
Tom

DirtRocket8x · 11-14-2012, 12:38 PM

I'm needing the front spring hangers/ core support mount if price is right to 75042 garland Texas
Posted via Mobile Device

**t korinek** · 11-14-2012, 01:43 PM

This truck was sent to scrap many moons ago.
Thanks
Tom
Posted via Mobile Device

villa 66 · 11-18-2012, 09:43 PM

What would u be asking for the 81 rolling frame? Thanks

villa 66 · 11-18-2012, 09:44 PM

What would u be asking for the 81 rolling frame? Thanks

1985-GMC · 11-18-2012, 09:55 PM

What don't yall get? HE DOESN'T HAVE IT ANYMORE!!!

Anyway you would be better off searching craigslist for a cheap truck near you villa.

04-16-2011, 11:35 AM	#26
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,862	Re: 81 1 ton 4x4 for parts Could I buy those white mirrors off the '89? __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

04-21-2011, 09:09 AM	#27
K30_dump Registered User Join Date: Oct 2007 Location: Pennsylvania Posts: 164	Re: 81 1 ton 4x4 for parts Tom, Not sure if you've had any takers on the frame yet, but I'm still in search of a set of rear spring hangers.... Let me know, thanks Joe

04-21-2011, 10:09 AM	#28
t korinek Truckin' Krazy Join Date: May 2000 Location: mesa az Posts: 6,190	Re: 81 1 ton 4x4 for parts Special-K I think I have the complete 89 truck sold K30 dump, looking like that frame is going to be available for parts, it wouldn't happen till late next week. duallyjams I have a 205 for a 400 with the adapter, its the figure 8 style & is not a slip yoke $475 + shipping if interested, shipping probably around $100 __________________ Dealer for: American Auto Wire Precision weatherstripping Dakota Digital Trim parts Carpets Truck World seat covers & Many others Chevy Parts locator in Mesa AZ!

04-21-2011, 10:17 AM	#29
K30_dump Registered User Join Date: Oct 2007 Location: Pennsylvania Posts: 164	Re: 81 1 ton 4x4 for parts PM sent... Joe Posted via Mobile Device

04-21-2011, 06:11 PM	#30
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,862	Re: 81 1 ton 4x4 for parts Let me know if your deal falls through on the '89. I'm interested in it...thanks __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

04-22-2011, 08:58 AM	#31
duallyjams Registered User Join Date: May 2007 Location: Deale Md Posts: 4,663	Re: 81 1 ton 4x4 for parts Figure 8 are everywhere on cl for 100. The 89 had the round 6 bolt pattern.Much easier to sell the hole truck.Thanks anyway. __________________ James 63 GMC V6 4speed carryall 65 chevy swb bbw V8 auto 68 K20 327/4 speed, buddy buckets 2002 GMC CC Dually Duramax 64 GMC lwb 3/4 V6 4speed SOLD 66 GMC swb bbw buddy buckets SOLD IG duallyjams The only thing that stays the same is constant change!

04-22-2011, 10:00 AM	#32
t korinek Truckin' Krazy Join Date: May 2000 Location: mesa az Posts: 6,190	Re: 81 1 ton 4x4 for parts If you can find 32 spline turbo 400 205s with adapters all day long on cl for $100 you should be buying all of them, they are hard to come by here. __________________ Dealer for: American Auto Wire Precision weatherstripping Dakota Digital Trim parts Carpets Truck World seat covers & Many others Chevy Parts locator in Mesa AZ!

05-01-2011, 10:15 PM	#34
D O C Registered User Join Date: May 2007 Location: st paul tx Posts: 49	Re: 81 1 ton 4x4 for parts Do you have any driveshafts from a k30 400/205 fixed yoke? could pm me if you do thanks

06-13-2011, 11:58 PM	#35
Western1 Registered User Join Date: Jun 2011 Location: Detroit mi Posts: 29	Re: 81 1 ton 4x4 for parts Interested in the wheels. Think they are stock 16.5x9.75? Rears different from fronts? Thanks Posted via Mobile Device

06-28-2011, 09:30 PM	#36
1985-GMC Chevy Enthusiast Join Date: Jul 2009 Location: Canyon Lake Texas Posts: 2,024	Re: 81 1 ton 4x4 for parts Whats your best price on the complete A\C system shipped to 78133? __________________ Tony 1985 GMC K2500 restoration Project: Rust, White & Blue 1989 Chevy R3500 CC Cummins & 4X4 swap some day... 1989 Burb (D60, 14BFF, 12V, NV4500, NP205, 37" tires in progress)

07-11-2011, 11:59 PM	#37
bikes&bowties Registered User Join Date: May 2009 Location: Washington Posts: 663	Re: 81 1 ton 4x4 for parts How much for the front spring hangers shipped to 98848?

07-12-2011, 12:14 AM	#38
t korinek Truckin' Krazy Join Date: May 2000 Location: mesa az Posts: 6,190	Re: 81 1 ton 4x4 for parts That truck is long gone. Thanks Tom Posted via Mobile Device __________________ Dealer for: American Auto Wire Precision weatherstripping Dakota Digital Trim parts Carpets Truck World seat covers & Many others Chevy Parts locator in Mesa AZ!

08-20-2011, 09:36 PM	#39
old Rusty C10 Robert Olson Transport Join Date: Oct 2002 Location: recent transplant to NC USA Posts: 20,276	Re: 81 1 ton 4x4 for parts does it have a tilt steering column with automatic trans if so shipped to 08859 minus steering wheel __________________ Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!!

10-25-2012, 03:09 PM	#40
Sandemonium Proud owner of a 55.1 AD Join Date: Oct 2006 Location: Desert Hills, AZ Posts: 460	Re: 81 1 ton 4x4 for parts Tom, Is the fuel filler still available? If so, what are you asking for it? Thank you, Bob Posted via Mobile Device

10-25-2012, 04:47 PM	#41
t korinek Truckin' Krazy Join Date: May 2000 Location: mesa az Posts: 6,190	Re: 81 1 ton 4x4 for parts No Bob, fuel filler & the rest of the truck are long gone, I probably have a 72 blazer fuel neck if that would work. Tom __________________ Dealer for: American Auto Wire Precision weatherstripping Dakota Digital Trim parts Carpets Truck World seat covers & Many others Chevy Parts locator in Mesa AZ!



Register or Log In To remove these advertisements.

11-14-2012, 12:38 PM	#42
DirtRocket8x Registered User Join Date: Dec 2011 Location: Union valley texas Posts: 75	Re: 81 1 ton 4x4 for parts I'm needing the front spring hangers/ core support mount if price is right to 75042 garland Texas Posted via Mobile Device

11-14-2012, 01:43 PM	#43
t korinek Truckin' Krazy Join Date: May 2000 Location: mesa az Posts: 6,190	Re: 81 1 ton 4x4 for parts This truck was sent to scrap many moons ago. Thanks Tom Posted via Mobile Device __________________ Dealer for: American Auto Wire Precision weatherstripping Dakota Digital Trim parts Carpets Truck World seat covers & Many others Chevy Parts locator in Mesa AZ!

11-18-2012, 09:43 PM	#44
villa 66 Registered User Join Date: May 2009 Location: MERCEDES,TEXAS Posts: 146	Re: 81 1 ton 4x4 for parts What would u be asking for the 81 rolling frame? Thanks

11-18-2012, 09:44 PM	#45
villa 66 Registered User Join Date: May 2009 Location: MERCEDES,TEXAS Posts: 146	Re: 81 1 ton 4x4 for parts What would u be asking for the 81 rolling frame? Thanks

11-18-2012, 09:55 PM	#46
1985-GMC Chevy Enthusiast Join Date: Jul 2009 Location: Canyon Lake Texas Posts: 2,024	Re: 81 1 ton 4x4 for parts What don't yall get? HE DOESN'T HAVE IT ANYMORE!!! Anyway you would be better off searching craigslist for a cheap truck near you villa. __________________ Tony 1985 GMC K2500 restoration Project: Rust, White & Blue 1989 Chevy R3500 CC Cummins & 4X4 swap some day... 1989 Burb (D60, 14BFF, 12V, NV4500, NP205, 37" tires in progress)

Register or Log In To remove these advertisements.