TX WTB - factory radio brackets - The 1947 - Present Chevrolet & GMC Truck Message Board Network

1972SUPERSB · 11-17-2012, 11:58 PM

I need the brackets to mount the factory stereo in the dash. I was told there are 3 total brackets for the radio? Also do the radio brackets mount to speaker bracket? Thanks
Posted via Mobile Device
Posted via Mobile Device

teeitup · 11-18-2012, 12:58 AM

There are 4 brackets total in a set, one on radio and a "L" bracket that goes up to the mount that goes on cab and then the one speaker bracket

blessedfind · 11-18-2012, 05:03 AM

I think I have the pieces you are looking for. $30.00 shipped to you.
Let me know.

Tuff Gong · 11-18-2012, 06:39 AM

The one that goes one the radio is the hardest to find IMO. Let me know if blessedfind doesn't have what you need.

**Ironhorse** · 11-18-2012, 08:54 AM

Will look later this morning, think I have two of the brackets. One that bolts to the firewall and the speaker bracket. Could probably make the " L " bracket from a piece of metal. It supports the back of the radio/weight and mounts to the firewall bracket. Yours for " FREEBIE " style just pay the shipping which can't be much. Just paying it forward for when I installed my AM/FM truck radio and could not find the brackets I needed. Now I have these extras, LOL.

1972SUPERSB · 11-18-2012, 10:53 AM

Quote:

Originally Posted by Ironhorse

Will look later this morning, think I have two of the brackets. One that bolts to the firewall and the speaker bracket. Could probably make the " L " bracket from a piece of metal. It supports the back of the radio/weight and mounts to the firewall bracket. Yours for " FREEBIE " style just pay the shipping which can't be much. Just paying it forward for when I installed my AM/FM truck radio and could not find the brackets I needed. Now I have these extras, LOL.

Great sounds good I do have this part which I think is part of the speaker bracket. If you have any other brackets and I can pay shipping only for them that would be great. Thanks !
Posted via Mobile Device

**Ironhorse** · 11-18-2012, 12:53 PM

Found the firewall bracket. The picture you show is the radio speaker bracket that " clips " to the speaker magnet. Do you have the speaker? If not, I would recommend trying www.turnswitch.com for your replacement speaker. I got my speaker from them when I installed my factory AM/FM and am very happy with it. Better than having an old one reconed in my opinion. Can do a pic of the firewall bracket if needed, don't have one right now or do a searc for " radio brackets " to see what it looks like. As I said it's a FREEBIE. PM me your mailing address and I will send it out free gratious on the shipping. Again, just paying it forward from a couple board members who've helped me out in the past. If someone can post a pic of the " L " bracket with measurements it would be easy to fab up.

1972SUPERSB · 11-18-2012, 01:17 PM

Quote:

Originally Posted by Ironhorse

Found the firewall bracket. The picture you show is the radio speaker bracket that " clips " to the speaker magnet. Do you have the speaker? If not, I would recommend trying www.turnswitch.com for your replacement speaker. I got my speaker from them when I installed my factory AM/FM and am very happy with it. Better than having an old one reconed in my opinion. Can do a pic of the firewall bracket if needed, don't have one right now or do a searc for " radio brackets " to see what it looks like. As I said it's a FREEBIE. PM me your mailing address and I will send it out free gratious on the shipping. Again, just paying it forward from a couple board members who've helped me out in the past. If someone can post a pic of the " L " bracket with measurements it would be easy to fab up.

I don't have original speaker and will need to get one. I will try turnswitch. I will PM you about it. Thanks
Posted via Mobile Device

**daddymoo2** · 11-18-2012, 05:01 PM

I have several sets listed in a thread. Thanks daddymoo2

teeitup · 11-18-2012, 05:51 PM

There was a pic of all the brackets on that one thread of mine when you asked about them.

A.Bursell · 11-18-2012, 08:12 PM

Are all the holes and anything necessary to use these brackets to mount a radio and speaker present on a radio delete truck? If so, I'd also be interested in a set of 4 brackets so I can look at adding a radio to my truck.

Adam
Posted via Mobile Device

teeitup · 11-18-2012, 08:16 PM

Adam, I have quite a few sets out there, Thanks Randy

A.Bursell · 11-19-2012, 07:09 AM

Quote:

Originally Posted by teeitup

Adam, I have quite a few sets out there, Thanks Randy

Thanks Randy-- sending payment ASAP.

Adam

1972SUPERSB · 11-19-2012, 11:44 AM

Does anyone have a diagram of how all these radio brackets and speaker brackets piece together when installing it under the dash? Are they the same for am radio and am/fm radio. A diagram or pic will help. Thanks
Posted via Mobile Device

Tuff Gong · 11-19-2012, 12:45 PM

Quote:

Originally Posted by 1972SUPERSB

Does anyone have a diagram of how all these radio brackets and speaker brackets piece together when installing it under the dash? Are they the same for am radio and am/fm radio. A diagram or pic will help. Thanks
Posted via Mobile Device

here you go...

http://67-72chevytrucks.com/vboard/s...d.php?t=518727

1972SUPERSB · 11-19-2012, 12:49 PM

Quote:

Originally Posted by Brian Atkinson

here you go...

http://67-72chevytrucks.com/vboard/s...d.php?t=518727

Great! Thanks a lot Brian!
Posted via Mobile Device

11-17-2012, 11:58 PM	#1
1972SUPERSB Registered User Join Date: Sep 2012 Location: San Antonio, TX Posts: 1,026	WTB - factory radio brackets I need the brackets to mount the factory stereo in the dash. I was told there are 3 total brackets for the radio? Also do the radio brackets mount to speaker bracket? Thanks Posted via Mobile Device Posted via Mobile Device __________________ Jeff 1972 Cheyenne Super SWB 350, Auto, Bucket Seats w/Console, Tach, Factory A/C, P/S ,P/B, Tilt 1998 Chevy 1500 Ext Cab 5.7, Pewter w/blue interior

11-18-2012, 12:58 AM	#2
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: WTB - factory radio brackets There are 4 brackets total in a set, one on radio and a "L" bracket that goes up to the mount that goes on cab and then the one speaker bracket __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

11-18-2012, 05:03 AM	#3
blessedfind Registered User Join Date: Jan 2012 Location: Concord, NC Posts: 334	Re: WTB - factory radio brackets I think I have the pieces you are looking for. $30.00 shipped to you. Let me know.

11-18-2012, 06:39 AM	#4
Tuff Gong Registered User Join Date: Jan 2011 Location: Glendale, AZ Posts: 3,178	Re: WTB - factory radio brackets The one that goes one the radio is the hardest to find IMO. Let me know if blessedfind doesn't have what you need.

11-18-2012, 08:54 AM	#5
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,154	Re: WTB - factory radio brackets Will look later this morning, think I have two of the brackets. One that bolts to the firewall and the speaker bracket. Could probably make the " L " bracket from a piece of metal. It supports the back of the radio/weight and mounts to the firewall bracket. Yours for " FREEBIE " style just pay the shipping which can't be much. Just paying it forward for when I installed my AM/FM truck radio and could not find the brackets I needed. Now I have these extras, LOL. __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

11-18-2012, 12:53 PM	#7
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,154	Re: WTB - factory radio brackets Found the firewall bracket. The picture you show is the radio speaker bracket that " clips " to the speaker magnet. Do you have the speaker? If not, I would recommend trying www.turnswitch.com for your replacement speaker. I got my speaker from them when I installed my factory AM/FM and am very happy with it. Better than having an old one reconed in my opinion. Can do a pic of the firewall bracket if needed, don't have one right now or do a searc for " radio brackets " to see what it looks like. As I said it's a FREEBIE. PM me your mailing address and I will send it out free gratious on the shipping. Again, just paying it forward from a couple board members who've helped me out in the past. If someone can post a pic of the " L " bracket with measurements it would be easy to fab up. __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

11-18-2012, 05:01 PM	#9
daddymoo2 Senior Member Join Date: Mar 2010 Location: union,ky Posts: 1,559	Re: WTB - factory radio brackets I have several sets listed in a thread. Thanks daddymoo2

11-18-2012, 05:51 PM	#10
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: WTB - factory radio brackets There was a pic of all the brackets on that one thread of mine when you asked about them. __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

11-18-2012, 08:12 PM	#11
A.Bursell Registered User Join Date: Jul 2012 Location: Marysville, WA Posts: 294	Re: WTB - factory radio brackets Are all the holes and anything necessary to use these brackets to mount a radio and speaker present on a radio delete truck? If so, I'd also be interested in a set of 4 brackets so I can look at adding a radio to my truck. Adam Posted via Mobile Device

11-18-2012, 08:16 PM	#12
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: WTB - factory radio brackets Adam, I have quite a few sets out there, Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

11-19-2012, 11:44 AM	#14
1972SUPERSB Registered User Join Date: Sep 2012 Location: San Antonio, TX Posts: 1,026	Re: WTB - factory radio brackets Does anyone have a diagram of how all these radio brackets and speaker brackets piece together when installing it under the dash? Are they the same for am radio and am/fm radio. A diagram or pic will help. Thanks Posted via Mobile Device __________________ Jeff 1972 Cheyenne Super SWB 350, Auto, Bucket Seats w/Console, Tach, Factory A/C, P/S ,P/B, Tilt 1998 Chevy 1500 Ext Cab 5.7, Pewter w/blue interior



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.