Perfect 72 door price - The 1947 - Present Chevrolet & GMC Truck Message Board Network

imdarren · 10-19-2003, 10:16 PM

Just wondering if there was such a thing, about how much a guy would have to give for a set of nearly perfect doors for a 72.
Ones with no rust or body repairs needed.
Thanks.

Darren

Hotrodhenryj · 10-19-2003, 10:28 PM

If I had a set they would be 400.

teeitup · 10-19-2003, 10:28 PM

Finding them around here is hard, probably run you $400 for a pair of rust free if you found them. Good luck, Randy

jacquesdean · 10-20-2003, 12:38 AM

Dealer here told me he is getting the doors new from lmc for $250.

*Phillip Johnson* · 10-20-2003, 12:47 AM

I bough a set a few years back from a local add in the Chico Calif paper for $125, complete with mirrors and upper and lower molding.
It was a great find. They are now long gone on a truck I sold 2 years ago.

progress · 10-20-2003, 10:40 AM

Darren, I saw a set at a swap meet two years ago for $50! They were gone by the time I got back to pick them up...LOL! Frank is the guy around here with all the good doors!

*Phillip Johnson* · 10-20-2003, 11:29 AM

I have a set of perfect 67-71 doors for $250. No shipping but you are not that far away.

FRANKIEPOTATAS · 10-20-2003, 11:48 AM

the cheapest I have bought complete doors (good condition) is $75 and the most expensive is $125

1970blazin · 10-20-2003, 12:58 PM

I bought a set from WES at classic heartbeat. They were RUST-free and the only thing wrong with them was they had cut outs for speakers. Had perfect vent windows and regulators...for $300. I thought it was a good deal. Saved lots of work fixing the old ones on my blazer.
Diane

wdz28ss · 10-21-2003, 11:43 PM

I bought a set of near perfect complete 71 doors for $200.

teeitup · 10-22-2003, 12:33 AM

Its amazing the price difference for a screw hole and window reg.

**STP67-72** · 10-22-2003, 10:29 PM

67-71 doors bring 100-200 each and 72's will bring up to 250 for one in original paint and great shape.
Hope this helps.

imdarren · 10-22-2003, 11:28 PM

Thank you! Thank you!
You guys are great!
I was just trying to see if I should keep the doors off a good clean 72 GMC I am getting ready to sell. Thet are not totally rust free however (the bottoms have some), and they have holes for speakers.
Figure maybe I 'll leave them on the truck, and buy better ones for the Cheyenne Super. I would spend more than $300 on a body guy making these perfect.
I just needed help deciding on where to spend the money / recources.

Darren

10-19-2003, 10:16 PM	#1
imdarren Registered User Join Date: Oct 2001 Location: SW Washington Posts: 1,006	Perfect 72 door price Just wondering if there was such a thing, about how much a guy would have to give for a set of nearly perfect doors for a 72. Ones with no rust or body repairs needed. Thanks. Darren __________________ Washington State 1967 Chevy C10 LWB Rodstoration In Progress. 1972 K20 Cheyenne Super

10-19-2003, 10:28 PM	#2
Hotrodhenryj Truck Farmer Join Date: Nov 2001 Location: Lake Havasu City, Arizona Posts: 1,192	If I had a set they would be 400. __________________ Arizona rust free sheetmetal

10-19-2003, 10:28 PM	#3
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Finding them around here is hard, probably run you $400 for a pair of rust free if you found them. Good luck, Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

10-20-2003, 12:38 AM	#4
jacquesdean Registered User Join Date: Jan 2003 Location: Snead, Alabama Posts: 399	doors Dealer here told me he is getting the doors new from lmc for $250. __________________ Jock, Powder blasting shop, Alabama

10-20-2003, 10:40 AM	#6
progress Gotta luv a clean shave Join Date: Jan 2002 Location: Kent, WA Posts: 226	Darren, I saw a set at a swap meet two years ago for $50! They were gone by the time I got back to pick them up...LOL! Frank is the guy around here with all the good doors! __________________ Welding while you wait...you can help if you like and it...might even save you a little as long as you don't mess things up! We make house calls too...just like the old days!

10-20-2003, 12:47 AM	#5
Phillip Johnson Account Suspended Join Date: Apr 2000 Location: Grants Pass, Oregon Posts: 1,580	I bough a set a few years back from a local add in the Chico Calif paper for $125, complete with mirrors and upper and lower molding. It was a great find. They are now long gone on a truck I sold 2 years ago.

10-20-2003, 11:29 AM	#7
Phillip Johnson Account Suspended Join Date: Apr 2000 Location: Grants Pass, Oregon Posts: 1,580	I have a set of perfect 67-71 doors for $250. No shipping but you are not that far away.

10-20-2003, 11:48 AM	#8
FRANKIEPOTATAS Registered User Join Date: Oct 2003 Location: San Francisco Bay Area Posts: 63	the cheapest I have bought complete doors (good condition) is $75 and the most expensive is $125

10-20-2003, 12:58 PM	#9
1970blazin Blazerless:-( Join Date: Jun 2003 Location: Olympia WA Posts: 1,612	I bought a set from WES at classic heartbeat. They were RUST-free and the only thing wrong with them was they had cut outs for speakers. Had perfect vent windows and regulators...for $300. I thought it was a good deal. Saved lots of work fixing the old ones on my blazer. Diane __________________ 1970blazin 1970 CST Blazer-Orig. Dark Blue-SOLD Progress Pics of Blazer for sale

10-21-2003, 11:43 PM	#10
wdz28ss Registered User Join Date: Sep 2002 Location: Clinton, Ut Posts: 230	I bought a set of near perfect complete 71 doors for $200. __________________ '72 Cheyenne super, short-fleet, air-tilt-tach, fuel injected LT1, 700r4, 3.08 posi, 4WDB, step notched and bagged. "the one i wish i still had"

10-22-2003, 12:33 AM	#11
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Its amazing the price difference for a screw hole and window reg. __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

10-22-2003, 10:29 PM	#12
STP67-72 Senior Member Join Date: Jan 2002 Location: PORT NECHES, TEXAS / USA Posts: 1,666	67-71 doors bring 100-200 each and 72's will bring up to 250 for one in original paint and great shape. Hope this helps.

10-22-2003, 11:28 PM	#13
imdarren Registered User Join Date: Oct 2001 Location: SW Washington Posts: 1,006	Thank you! Thank you! You guys are great! I was just trying to see if I should keep the doors off a good clean 72 GMC I am getting ready to sell. Thet are not totally rust free however (the bottoms have some), and they have holes for speakers. Figure maybe I 'll leave them on the truck, and buy better ones for the Cheyenne Super. I would spend more than $300 on a body guy making these perfect. I just needed help deciding on where to spend the money / recources. Darren __________________ Washington State 1967 Chevy C10 LWB Rodstoration In Progress. 1972 K20 Cheyenne Super



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.