anyone know where to get this bumper? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Cumminpwr11 · 11-10-2012, 06:25 PM

[/QUOTE]

I copied this image form the truck forum. (in case it doesn't show up lol) I would like one like this! I dont care about trimming the fenders I like this look for my Suburban.

Chris

POS1 · 11-10-2012, 06:57 PM

Looks custom but I'd love to get one and modify it a bit.
Posted via Mobile Device

Cumminpwr11 · 11-10-2012, 07:30 PM

If I can find who build it. it was posted on here I'd like to talk them into building me one.

maybe a matching one for the rear with a big swing out tire carrier.

Chris

rjsdad · 11-11-2012, 03:41 AM

This is exactly what I'm looking for too! Also with a matching rear with a swingout spare tire mount and jerry can holder. Hope you find the builder!!

Jeff
Posted via Mobile Device

*bk2life* · 11-11-2012, 03:51 AM

their "mass" produced, i'll dig through some of my jeep mags and find the company.

OldCreek · 11-11-2012, 12:50 PM

Apparently, the maker of that bumper has a lot of unhappy customers on this board. I have no experience with them. Buyer beware....

**LockDoc** · 11-11-2012, 01:15 PM

Quote:

Originally Posted by OldCreek

Apparently, the maker of that bumper has a lot of unhappy customers on this board. I have no experience with them. Buyer beware....

How about something to back that up... Seems like no one even knows who makes it except you and that is what the OP wants to know.

Just sayin'...

LockDoc

Cumminpwr11 · 11-11-2012, 02:30 PM

I found it.

LockDoc, there is a thread in the Blazer section. it says they were a little difficult to deal with and took a while to get them. BUT! I still will order a set of front and rear.

RJSDAD. they have a rear for you too! All the goodies.

Company is TAG(tactical armour group) google it and they show right up.

I'd post the website, but I am not sure about the rules here anymore and I don't want my pee pee slapped again.

It there and I'm going to call and figure out my cut out options.

Thanks for the help guys

Chris

**LockDoc** · 11-11-2012, 04:39 PM

Quote:

Originally Posted by Cumminpwr11

I found it.

LockDoc, there is a thread in the Blazer section. it says they were a little difficult to deal with and took a while to get them.

Thanks!

I'd post the website, but I am not sure about the rules here anymore and I don't want my pee pee slapped again.

You've been listening to Cheech & Chong haven't you..

Thanks for the help guys

Chris

LockDoc

*project 67 sub* · 11-11-2012, 05:33 PM

lol

**70cst** · 11-11-2012, 09:17 PM

Quote:

Originally Posted by Cumminpwr11

I found it.

LockDoc, there is a thread in the Blazer section. it says they were a little difficult to deal with and took a while to get them. BUT! I still will order a set of front and rear.

RJSDAD. they have a rear for you too! All the goodies.

Company is TAG(tactical armour group) google it and they show right up.

I'd post the website, but I am not sure about the rules here anymore and I don't want my pee pee slapped again.

It there and I'm going to call and figure out my cut out options.

Thanks for the help guys

Chris

As far as I know you can LINK the site...

mcmlxix · 11-11-2012, 10:26 PM

I'm going to have a friend of mine build me one that looks like this... He's helping (ok doing most of it) with my LSx swap into my 72 Blazer.... Once that's finished, then I'll ask him about the bumper....

POS1 · 11-11-2012, 11:33 PM

http://www.tacticalarmorgroup.com/TA...3/Default.aspx
Posted via Mobile Device

Tinkermc · 11-12-2012, 09:49 PM

take a real good pic and set yourself down with your welder and make your own, no delays if anyone gives you sh-t you can talk to the owner of the shop and give him heck.

mcmlxix · 11-12-2012, 09:52 PM

Quote:

Originally Posted by Tinkermc

take a real good pic and set yourself down with your welder and make your own, no delays if anyone gives you sh-t you can talk to the owner of the shop and give him heck.

Now that's funny ....

PS: You know you have to cut the bottoms off your front fenders to fit this bumper, right?

OldCreek · 11-27-2012, 03:47 PM

Leon,

I hear you! The only info I have is what I've read on here...that's why I didn't list the maker/company. I figured that if those interested did their own footwork, they'll find out who the maker is and what issues others have had and make their own decisions.

I just wanted to be helpful to a fellow board member...and I guess I wasn't.
(I knew I shouldn't have chimed in.

)

As far as the bumper is concerned:
I really like the idea of making your own or getting someone local to do one for you. Food for thought...I bought a really nice winch bumper on craigslist for $100 and am adapting it to fit...

11-10-2012, 06:25 PM	#1
Cumminpwr11 Southern Nevada Coal Roller Join Date: Oct 2008 Location: Las Vegas NV Posts: 191	anyone know where to get this bumper? [/QUOTE] I copied this image form the truck forum. (in case it doesn't show up lol) I would like one like this! I dont care about trimming the fenders I like this look for my Suburban. Chris __________________ Chris 72 Suburban, 1 ton dodge chassis 4wd cummins, DTT 47rh 89%, PDR VE 3200 spring, PODS, Piers Turbo. 36 Chevy P/U rat rod project. 4bta cummins

11-10-2012, 06:57 PM	#2
POS1 Registered User Join Date: Jul 2011 Location: Houston, Texas Posts: 145	Re: anyone know where to get this bumper? Looks custom but I'd love to get one and modify it a bit. Posted via Mobile Device __________________ - Brian FleetFilter.com 1991 Chevrolet V1500 Suburban 4x4 1986 Jeep CJ7 1969 Porsche 911S Targa

11-10-2012, 07:30 PM	#3
Cumminpwr11 Southern Nevada Coal Roller Join Date: Oct 2008 Location: Las Vegas NV Posts: 191	Re: anyone know where to get this bumper? If I can find who build it. it was posted on here I'd like to talk them into building me one. maybe a matching one for the rear with a big swing out tire carrier. Chris __________________ Chris 72 Suburban, 1 ton dodge chassis 4wd cummins, DTT 47rh 89%, PDR VE 3200 spring, PODS, Piers Turbo. 36 Chevy P/U rat rod project. 4bta cummins

11-11-2012, 03:41 AM	#4
rjsdad Registered User Join Date: May 2011 Location: St. Paul, Ore. Posts: 145	Re: anyone know where to get this bumper? This is exactly what I'm looking for too! Also with a matching rear with a swingout spare tire mount and jerry can holder. Hope you find the builder!! Jeff Posted via Mobile Device

11-11-2012, 03:51 AM	#5
bk2life Account Suspended Join Date: Oct 2012 Location: phx, az Posts: 868	Re: anyone know where to get this bumper? their "mass" produced, i'll dig through some of my jeep mags and find the company.

11-11-2012, 12:50 PM	#6
OldCreek Registered User Join Date: Jan 2007 Location: Central Coast California Posts: 1,026	Re: anyone know where to get this bumper? Apparently, the maker of that bumper has a lot of unhappy customers on this board. I have no experience with them. Buyer beware.... __________________ 1972 K20 Suburban 5.7/700r4/NP205 Dana 44/H052 Sold 1972 C10 5.3L/4L60E 12bolt 5Lug - Sold 1971 K5 Blazer 6.0L LQ9 4L60E NP205 Dana 44/H052!!! 1970 K3500 1ton CrewCab 8.1L/Allison1000/NP205 Dana 60/14B!!!! - Sold 1984 K10 SWB 7.4L/4L80e/NP208 Corp 10/12 bolt Sold 1988 V30 CCLB 7.4L/TH400/NP205/Dana 60/Dana 70/3.73!!! (Sold) 2003 K2500HD 8.1/Allison1000/NP263

11-11-2012, 02:30 PM	#8
Cumminpwr11 Southern Nevada Coal Roller Join Date: Oct 2008 Location: Las Vegas NV Posts: 191	Re: anyone know where to get this bumper? I found it. LockDoc, there is a thread in the Blazer section. it says they were a little difficult to deal with and took a while to get them. BUT! I still will order a set of front and rear. RJSDAD. they have a rear for you too! All the goodies. Company is TAG(tactical armour group) google it and they show right up. I'd post the website, but I am not sure about the rules here anymore and I don't want my pee pee slapped again. It there and I'm going to call and figure out my cut out options. Thanks for the help guys Chris __________________ Chris 72 Suburban, 1 ton dodge chassis 4wd cummins, DTT 47rh 89%, PDR VE 3200 spring, PODS, Piers Turbo. 36 Chevy P/U rat rod project. 4bta cummins

11-11-2012, 05:33 PM	#10
project 67 sub Account Suspended Join Date: Mar 2007 Location: san bernardino ca. everywhere Posts: 3,938	Re: anyone know where to get this bumper? lol

11-11-2012, 10:26 PM	#12
mcmlxix Collector of Projects Join Date: Apr 2003 Location: Las Vegas Posts: 3,106	Re: anyone know where to get this bumper? I'm going to have a friend of mine build me one that looks like this... He's helping (ok doing most of it) with my LSx swap into my 72 Blazer.... Once that's finished, then I'll ask him about the bumper.... __________________ Rich 1972 K5 Blazer CST Click HERE D60 BIG BRAKE UPGRADE Click HERE

11-11-2012, 11:33 PM	#13
POS1 Registered User Join Date: Jul 2011 Location: Houston, Texas Posts: 145	Re: anyone know where to get this bumper? http://www.tacticalarmorgroup.com/TA...3/Default.aspx Posted via Mobile Device __________________ - Brian FleetFilter.com 1991 Chevrolet V1500 Suburban 4x4 1986 Jeep CJ7 1969 Porsche 911S Targa

11-12-2012, 09:49 PM	#14
Tinkermc Registered User Join Date: Jul 2011 Location: Farmville, Va Posts: 3,026	Re: anyone know where to get this bumper? take a real good pic and set yourself down with your welder and make your own, no delays if anyone gives you sh-t you can talk to the owner of the shop and give him heck.

11-27-2012, 03:47 PM	#16
OldCreek Registered User Join Date: Jan 2007 Location: Central Coast California Posts: 1,026	Re: anyone know where to get this bumper? Leon, I hear you! The only info I have is what I've read on here...that's why I didn't list the maker/company. I figured that if those interested did their own footwork, they'll find out who the maker is and what issues others have had and make their own decisions. I just wanted to be helpful to a fellow board member...and I guess I wasn't. (I knew I shouldn't have chimed in. ) As far as the bumper is concerned: I really like the idea of making your own or getting someone local to do one for you. Food for thought...I bought a really nice winch bumper on craigslist for $100 and am adapting it to fit... __________________ 1972 K20 Suburban 5.7/700r4/NP205 Dana 44/H052 Sold 1972 C10 5.3L/4L60E 12bolt 5Lug - Sold 1971 K5 Blazer 6.0L LQ9 4L60E NP205 Dana 44/H052!!! 1970 K3500 1ton CrewCab 8.1L/Allison1000/NP205 Dana 60/14B!!!! - Sold 1984 K10 SWB 7.4L/4L80e/NP208 Corp 10/12 bolt Sold 1988 V30 CCLB 7.4L/TH400/NP205/Dana 60/Dana 70/3.73!!! (Sold) 2003 K2500HD 8.1/Allison1000/NP263 Last edited by OldCreek; 11-27-2012 at 03:55 PM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.