Running 250/ 6 cyl- 25 bucks! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Tx Firefighter · 10-23-2003, 01:20 PM

This is the engine I pulled out of my truck. 70 model 250 6 cylinder. Run fine till the end. Burns some oil, could use a rebuild no doubt. It's in my way, I need garage room.

It's been indoors the whole time. I have a hoist, I'll load it for you.

Fort Worth area. 25 bucks AND I'll load it up for you in your truck. Complete with carb and manifolds, all the way down to the oil pan. No distributor.

25 bucks- somebody! please! If no takers, I'm throwing it into the scrap pile and it'll be a worthless, rusted hunk in a month.

Hell, I'll swap for anything too.

*Gee_Emm* · 10-23-2003, 01:28 PM

Could you get the casting number off of the intake manifold, I may be interested in just it.

Tx Firefighter · 10-23-2003, 01:37 PM

Gee Emm- its number 8859881

dunno what it was originally off of because it is painted a different color than the engine. It fit fine and worked fine though.

10-23-2003, 01:20 PM	#1
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	Running 250/ 6 cyl- 25 bucks! This is the engine I pulled out of my truck. 70 model 250 6 cylinder. Run fine till the end. Burns some oil, could use a rebuild no doubt. It's in my way, I need garage room. It's been indoors the whole time. I have a hoist, I'll load it for you. Fort Worth area. 25 bucks AND I'll load it up for you in your truck. Complete with carb and manifolds, all the way down to the oil pan. No distributor. 25 bucks- somebody! please! If no takers, I'm throwing it into the scrap pile and it'll be a worthless, rusted hunk in a month. Hell, I'll swap for anything too. __________________ I'm on the Instagram- @Gearhead_Kevin

10-23-2003, 01:37 PM	#3
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	Gee Emm- its number 8859881 dunno what it was originally off of because it is painted a different color than the engine. It fit fine and worked fine though. __________________ I'm on the Instagram- @Gearhead_Kevin

10-23-2003, 01:28 PM	#2
Gee_Emm Account Suspended Join Date: Sep 2000 Posts: 4,002	Could you get the casting number off of the intake manifold, I may be interested in just it.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.