Inner fender to cab mount - The 1947 - Present Chevrolet & GMC Truck Message Board Network

66farmer · 11-27-2012, 10:42 AM

Why did this kit come with (4) grommets. I know were two of them go not sure of the other two.

Thanks for the help

Hx16457 · 11-27-2012, 11:25 AM

I had the same question, I never used the other two..... When I took the truck apart there where only two used.....

61K10 · 11-30-2012, 01:42 PM

this one came off a 61 and is org. the grommet is sandwiched and a bushing going through the middle where the bolt goes. so one is used on each side of the inner fender. don't know about other years.

**Clyde65** · 11-30-2012, 08:14 PM

My 65 was just like above, sandwiched.
Posted via Mobile Device

**Captainfab** · 12-01-2012, 02:21 AM

All the ones I remember, were 2 grommets each side, with the tube thru the center. And I believe the correct bolt is a shoulder bolt.

11-27-2012, 10:42 AM	#1
66farmer Registered User Join Date: Jun 2007 Location: North Plains Oregon Posts: 684	Inner fender to cab mount Why did this kit come with (4) grommets. I know were two of them go not sure of the other two. Thanks for the help Attached Images

11-27-2012, 11:25 AM	#2
Hx16457 Registered User Join Date: Sep 2012 Location: Lawton Oklahoma Posts: 308	Re: Inner fender to cab mount I had the same question, I never used the other two..... When I took the truck apart there where only two used..... __________________ People who make excuses didn't want to do it in the first place! http://s1326.photobucket.com/albums/...cpZZ1QQtppZZ16

11-30-2012, 01:42 PM	#3
61K10 Registered User Join Date: Feb 2012 Location: pleasant valley--placerville ca Posts: 3,039	Re: Inner fender to cab mount this one came off a 61 and is org. the grommet is sandwiched and a bushing going through the middle where the bolt goes. so one is used on each side of the inner fender. don't know about other years. Attached Images __________________ 1961 chevy K10 my build is------------61K10 build

11-30-2012, 08:14 PM	#4
Clyde65 1965 Chevy C10, 2005 4.8L/4l60 Join Date: Aug 2004 Location: DFW Texas Posts: 8,541	Re: Inner fender to cab mount My 65 was just like above, sandwiched. Posted via Mobile Device __________________ Clyde65 Rebuild of Clyde http://67-72chevytrucks.com/vboard/s...84#post8338184 69 Aristocrat Lo Liner build http://67-72chevytrucks.com/vboard/s...84#post7561684 *support our troops!*

12-01-2012, 02:21 AM	#5
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,246	Re: Inner fender to cab mount All the ones I remember, were 2 grommets each side, with the tube thru the center. And I believe the correct bolt is a shoulder bolt. __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.