|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
12-03-2012, 11:36 AM
|
#1 |
|
Registered User
Join Date: Oct 2011
Location: Pittsburgh Pa
Posts: 267
|
wiring harness questions.. help!
I wanted to post in here to see what harnesses you guys are running mainly.
To fill ya in I have a 51 3100 and I just this past week bought an 86 corvette as a donor vehicle. I really wanna use everything i can in the truck mainly the tpi 350, 700r4 tranny, steering column and suspension. My main question is does any company sell an entirely complete harness? Im talking everything for the motor and entire body harness that connects into the 86 column.. I called American auto wire and they have a truck harness, but its only for 81 and older columns. Any company make a newer column style harness? The guys at street&performance.cc have a stand alone motor/ tranny harness, which is nice but it would just be so much easier with a single harness. Any help would be appreciated! Posted via Mobile Device
__________________
91 s10 - bagged bodydropped 4", 350/700R4, narrowed reared, cantilever rear air bag setup 1951 chevy 3100 - in build/acquiring parts process. Have full C4 Corvette suspension front and rear, tpi 350, 700r4, 18" torque thrust II wheels |
|
|
|
12-03-2012, 01:21 PM
|
#2 |
|
Registered User
Join Date: Sep 2012
Location: Oregon
Posts: 3,303
|
Re: wiring harness questions.. help!
I ran the Painless harness, but dont even have turn signals on my 50 column. If I was to install a newer tilt column, I would just lay out the schematics and run the wires. You can send the ECU off to have the VATS disabled and run a regular ignition key without all of the failing GM security.
|
|
|
|
|
| Bookmarks |
|
|
Linear Mode
