The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1967 - 1972 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 10-25-2003, 12:46 PM   #1
dmurphy68
Registered User
 
Join Date: Nov 2002
Location: Middletown ohio
Posts: 1,058
Red face fuel pump ?

I Have a 350 bored 30 over with an rv cam and a 1405 carb with elect choke conversion. I am wanting to get rid of my manual fuel pump and put in an elect one. I saw some that are a inline pump with filter all in one. does any one know who makes this or is it worth it. let me know what you are running. opions are very helpful

thank
Darren

I am wanting to spend 50 to 100 bucks for one and do I need to have a regulater
__________________
The very atmosphere of firearms everywhere restrains evil interference. When firearms go, all goes, we need them every hour.
- George Washington


No free man shall be debarred the use of arms
- Thomas Jefferson


Later Darren
http://www.myspace.com/dmurphy68
dmurphy68 is offline   Reply With Quote
Old 10-25-2003, 01:27 PM   #2
Bill72BB
Thats the Hillbilly way
 
Bill72BB's Avatar
 
Join Date: Jul 2001
Location: Torrance,Ca
Posts: 5,979
FYi, when shopping for an electric fuel pump and running a Edelbrock carb you need to make sure you don't have too much fuel pressure ,I believe anything over 7 psi needs a fuel regulator my book is in the garage I will check later and find out what the limits are if someone hasn't posted them.
__________________
BILL
Torrance Calif 90504
Member DUF Club
Member Old Farts Club
72 3/4ton Custom Camper BB402/400 trans Dynomax Cerama-coat headers , Hei distributor ,Edelbrock 1411 air,ps,pb,leafsprings ,98 chevy 60/40 seat,S10 shoulder belts
tilt,3.54 Dana 60 rear. 16" Eagle wheels with LT265/75 16 tires,Gaylord Lid,H4 headlights with 100W relay conversion.


" If I knew I was going to live this long I would have taken better care of myself "
Marriage changes passion...suddenly you're in bed with a relative. A GUY'S PRAYER....

Lord, I pray for a nympho with huge boobs who owns a liquor store and likes to fish and hunt and has a Harley .Amen ,
Bill72BB is offline   Reply With Quote
Old 10-25-2003, 05:35 PM   #3
Bill72BB
Thats the Hillbilly way
 
Bill72BB's Avatar
 
Join Date: Jul 2001
Location: Torrance,Ca
Posts: 5,979
Edelbrock recommends fuel pressure be less than 6 psi , and should not drop below 2 psi.
__________________
BILL
Torrance Calif 90504
Member DUF Club
Member Old Farts Club
72 3/4ton Custom Camper BB402/400 trans Dynomax Cerama-coat headers , Hei distributor ,Edelbrock 1411 air,ps,pb,leafsprings ,98 chevy 60/40 seat,S10 shoulder belts
tilt,3.54 Dana 60 rear. 16" Eagle wheels with LT265/75 16 tires,Gaylord Lid,H4 headlights with 100W relay conversion.


" If I knew I was going to live this long I would have taken better care of myself "
Marriage changes passion...suddenly you're in bed with a relative. A GUY'S PRAYER....

Lord, I pray for a nympho with huge boobs who owns a liquor store and likes to fish and hunt and has a Harley .Amen ,
Bill72BB is offline   Reply With Quote
Old 10-25-2003, 06:44 PM   #4
Linus0014
Guest
 
Posts: n/a
I have one that I used on my 1835 Volks SANDRAIL. The name is FACET. Napa carries them for about 30.00 or 35.00 and a regulator is 20.00.
  Reply With Quote
Old 10-25-2003, 07:23 PM   #5
71k5
Registered User
 
Join Date: Feb 2002
Location: Manchester, PA
Posts: 138
Autozone sells two universal electric fuel pumps, E8012 and E8016. I think the E8016 is the low pressure one, three to five psi, I think. The other is 9 to12 psi, I think; check with the counter guy if you can find one who knows the answers. I also run an Edelbrock with the low pressure pump mounted back by the tank on the frame rail on my 4x4 Blazer, and a pressure regulator from Advance auto, Purlator, set to 3psi. Everything works great so far after a couple of years and cross country trips.
71k5 is offline   Reply With Quote
Old 10-25-2003, 09:50 PM   #6
dmurphy68
Registered User
 
Join Date: Nov 2002
Location: Middletown ohio
Posts: 1,058
thanks for the input everyone ever sience i put on the elect choke it is almost a turn key motor and if i can get an elect pump i think it will be .
thanks again
Darren
__________________
The very atmosphere of firearms everywhere restrains evil interference. When firearms go, all goes, we need them every hour.
- George Washington


No free man shall be debarred the use of arms
- Thomas Jefferson


Later Darren
http://www.myspace.com/dmurphy68
dmurphy68 is offline   Reply With Quote
Old 10-25-2003, 09:57 PM   #7
Linus0014
Guest
 
Posts: n/a
I have the edelbrock 1407 divorced choke, and am so glad I got it and not the manual one....But I am not too happy with the 1407...
  Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 06:56 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com