Parting "Twins"! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**PICKMUP** · 10-25-2003, 10:07 PM

Two 70 Chev 1/2T white 4spd trucks. Both very nice. Only selling major components like Engs, trans, rearends,
grills, front clips, beds, cabs, doors, TGs...no knobs, handles or little stuff.
If you are close enough for a "road trip", there is some nice pieces here.
Truck #1 is a 99,000 mile/99% rust free great running 350, AC truck, with great doors, straight bed w/side cargo box. I will gladly provide better description & prices on any item requested.

10-25-2003, 10:09 PM

How much for the tool box door and hinge?

dinnut · 10-25-2003, 10:12 PM

why cant the first truck be sold as is?

**PICKMUP** · 10-25-2003, 10:13 PM

Truck #2 has a bad 292 w/4spd. Nice front clip, replaced straight OEM GM in/out grill, pin straight bed (no tank holes), nice TG, canopy, red interior: seat, belts, door panels & headliner...again prices & description gladly given on any specific questions.
Don't they look like "TWINS"?

**PICKMUP** · 10-25-2003, 10:19 PM

This may give you a glimpse of the interior. Very clean, no tears in seat, shoulder harness, door panels & headliner are nicely done dark red pleated vinyl...Let's say $300 for these parts.

**ScottH** · 10-25-2003, 10:45 PM

Might be interested in front bumper depending on price plus shipping. Thanks.

Porkchop · 10-25-2003, 11:40 PM

How much would you want for a front bumper and outer grill?

**PICKMUP** · 10-26-2003, 01:19 AM

Tool box door & hinge off a rust free box (of course that would leave the bed worthless): $600... or you can get the it with the complele bed for the same price.
Used bumpers are not worth boxing & shipping. You can buy a new one a lot better for the same price.
"Why can't the first truck be sold as is?" Well, I guess it could, but then I would be a truck dealer, instead of a truck parts dealer...but let's say $3,500 and you can drive it home. I wouldn't pay that much for it, but if you just don't want me to part it...OK.

Forgot the grill question: complete assemblies (won't take 'em apart), inner & outer=$250 & $350 + boxing & shipping costs.

10-26-2003, 01:55 AM

Instead of saying you are parting "twins", I think you should write Parts for sale and give a price. So far there have been three people asking for items from two parting trucks, but non of which you will sell or take the time to ship. Or even then change the thread title to "99% rust free trucks for sale." I'm not here to be negative and I hope you don't think I'm putting you down b/c its not my intent. I know people that buy from you and are REALLY happy, and I would buy items too but they aren't parts being parted on a "Parting Twins", parts board.

**PICKMUP** · 10-26-2003, 03:32 AM

Quote:

"Only selling major components like: eng, trans, grills, doors, TGs...no knobs, handles or little stuff"

...and sorry but "Road Trip" means most of this big stuff is only going to be available to guys in this region, who can pick it up. I just can't ship a lot of this stuff...like most of us.
You can surely understand why no one is going to sell a tool box door off a real nice bed...it would keep the bed from ever selling.

10-26-2003, 04:26 AM

I understand about the bed, its partly b/c I've been trying to find a door for a while now. If you don't sell the bed which I think you will find a buyer, keep me on the list for the door and hinge, will you? Once again, I hope you didn't think I was wanting to stir things up.

**jerry moss** · 10-26-2003, 09:49 AM

Frank,
nice looking trucks. i don't think $3500 is out of line for that first truck if it looks as nice as the picture. i'd much rather spend 3500 for a straight original instead of 1000-1500 for a turd that'll need another 4-5 grand just to be presentable.

**1970 CST Short Wide** · 10-26-2003, 12:30 PM

Would you be willing to ship the interior parts and if so How much to 94565. Thanks
Steve

**PICKMUP** · 10-26-2003, 02:04 PM

Steve,
Sorry, but I need to have this stuff picked up. Do you know anyone coming this way?

69C10Atl · 10-26-2003, 02:58 PM

Does the 350 truck have power steering, if so how much for the pump bracket, pump pulley, and crank pulley shipped to 30360?

**PICKMUP** · 10-26-2003, 03:08 PM

A full PS sys: box, pump & brackets & pulleys is $150 + $50 to pack & ship it.
Sorry, no separate pieces available.

jhwkns · 10-26-2003, 03:08 PM

Frank ; I'm ISO a black factory steering wheel, and sunvisors. Can you help? TIA

10-26-2003, 03:48 PM

SO far we have 6 people asking for parts from a parting trucks parts thread. But none of the items are being sold or want to ship. I bought my steering setup gearbox, pump, brackets, hoses, for 40.00 and 30.00 for shipping...Something doesn't seem right here.....

**PICKMUP** · 10-26-2003, 03:55 PM

Are you coming up to get that #1 truck? Better hurry!

**67sss** · 10-26-2003, 04:02 PM

SHIPPING! I don't get it, why is that people have problem with shipping stuff. Working for a freight company we see windshields, hoods, bumpers,trannys,engines,frames or whatever. If it fits into a trailer you can ship it. I think sellers just need to know that if a buyer is willing to pay the freight, it can be shipped...sorry Frank I just need to vent.......phew, I fell better now. Thanks

**PICKMUP** · 10-26-2003, 04:12 PM

Quote:

"Something doesn't seem right here"

I think I would agree...It seems all I am doing is answering your complaints. What difference does it make if you bought something for less than I priced it for? Don't you feel like you took advantage of the guy because he didn't know what it was worth?

For the last time--I hope! I have two trucks I am selling parts from. They are offered to people who can come here and pick up. So, they are mostly for people on the West Coast that can travel (Road Trip) a little. I DON'T ship that much! That is how I have to operate---"A one-man operation, that is a half-a-man short".

There are lots of guys on here that will gladly ship little stuff. They advertise all of the time. Please contact them for that service.

**PICKMUP** · 10-26-2003, 04:18 PM

I don't have a black wheel or visors left on the place. Black sells fast.

I have two sets of those red belts--extra. Nice condition, good color, not worn, slight surface rust on buckles. $70 pr shipped. I will save the set in the pics/truck for who ever buys/picks up the complete interior.

ljbear · 10-26-2003, 04:23 PM

Quote:

Originally posted by 67sss
SHIPPING! I don't get it, why is that people have problem with shipping stuff.

If you saw Frank's operation you would probably understand. He has enough going on that shipping could turn into a full time job. We've all probably wrestled with shipping a large item, it's a lot of work and can be costly in time as well as money. Frank was clear when he rang the dinner bell, come and get it boys. If you want it, go get it. If that don't work for you, up the ante, I'm sure he'll step up and find the item a ride for you. I just did a 2000 mile road trip for parts and I like it that way. After seeing what can happen to some of the sheet metal in a shippers hands I just prefer handling my treasures myself. Linus, if you don't like his price, don't buy. You can't expect him to split up a full system for a single part, especially after he said that in the description. Hey Frank, can I buy a wrist pin off that 350?

LJ

Castiron9 · 10-26-2003, 08:05 PM

Yea.............

ratrod67 · 10-26-2003, 08:50 PM

Shipping big parts is a pain. I just got through shipping 69 DZ 302 engine, 67 Camaro convertible top frame and a couple fenders. It's a lot of trouble to get stuff crated and palleted up so it can be shipped safely. After you find or buy the supplies and get things boxed up you hit them with the quote. Usually 90% of the people will back out because of shipping rates and supply costs. Either that or try and jew you down on the price. Shipping big stuff just isn't worth it in most cases.

10-25-2003, 10:12 PM	#3
dinnut Registered User Join Date: Apr 2003 Location: missouri city, tx Posts: 4,486	why cant the first truck be sold as is? __________________ 70 longbed 496/th400/Ford 9"

10-25-2003, 10:13 PM	#4
PICKMUP "Trucks with Class" Join Date: Jul 2000 Location: OLYMPIA, WA, USA Posts: 8,158	Truck #2 Truck #2 has a bad 292 w/4spd. Nice front clip, replaced straight OEM GM in/out grill, pin straight bed (no tank holes), nice TG, canopy, red interior: seat, belts, door panels & headliner...again prices & description gladly given on any specific questions. Don't they look like "TWINS"? Attached Images __________________ Email: frankeham@comcast.net Phone: 360-956-7170

10-25-2003, 10:19 PM	#5
PICKMUP "Trucks with Class" Join Date: Jul 2000 Location: OLYMPIA, WA, USA Posts: 8,158	This may give you a glimpse of the interior. Very clean, no tears in seat, shoulder harness, door panels & headliner are nicely done dark red pleated vinyl...Let's say $300 for these parts. Attached Images __________________ Email: frankeham@comcast.net Phone: 360-956-7170

10-26-2003, 01:19 AM	#8
PICKMUP "Trucks with Class" Join Date: Jul 2000 Location: OLYMPIA, WA, USA Posts: 8,158	Tool box door & hinge off a rust free box (of course that would leave the bed worthless): $600... or you can get the it with the complele bed for the same price. Used bumpers are not worth boxing & shipping. You can buy a new one a lot better for the same price. "Why can't the first truck be sold as is?" Well, I guess it could, but then I would be a truck dealer, instead of a truck parts dealer...but let's say $3,500 and you can drive it home. I wouldn't pay that much for it, but if you just don't want me to part it...OK. Forgot the grill question: complete assemblies (won't take 'em apart), inner & outer=$250 & $350 + boxing & shipping costs. __________________ Email: frankeham@comcast.net Phone: 360-956-7170 Last edited by PICKMUP; 10-26-2003 at 01:23 AM.

10-26-2003, 09:49 AM	#12
jerry moss Born Psycho Join Date: Feb 2001 Location: brentwood,cal,usa Posts: 4,948	Frank, nice looking trucks. i don't think $3500 is out of line for that first truck if it looks as nice as the picture. i'd much rather spend 3500 for a straight original instead of 1000-1500 for a turd that'll need another 4-5 grand just to be presentable. __________________ jerry moss 72 cheyenne super K20- tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,tow hooks,bumper guards,toolbox,aux. fuel tank,posi front and rear,plus other goodies!!! SOLD 69 suburban K20-tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,4 inch all spring lift,4 speed, 14 bolt full floater, dana 44 HD,warn winch,posi front and rear,tow hooks,plus other goodies. 73/80 chevy/gmc K20 SB400,turbo 400,205,tilt,a-c,gas hog. 77 K/5 cheyenne blazer-daily driver/beater. SON HAS IT NOW BRENTWOOD,CALIFORNIA

10-25-2003, 10:07 PM	#1
PICKMUP "Trucks with Class" Join Date: Jul 2000 Location: OLYMPIA, WA, USA Posts: 8,158	Parting "Twins"! Two 70 Chev 1/2T white 4spd trucks. Both very nice. Only selling major components like Engs, trans, rearends, grills, front clips, beds, cabs, doors, TGs...no knobs, handles or little stuff. If you are close enough for a "road trip", there is some nice pieces here. Truck #1 is a 99,000 mile/99% rust free great running 350, AC truck, with great doors, straight bed w/side cargo box. I will gladly provide better description & prices on any item requested. Attached Images __________________ Email: frankeham@comcast.net Phone: 360-956-7170

10-25-2003, 10:09 PM	#2
Linus0014 Guest Posts: n/a	How much for the tool box door and hinge?

10-25-2003, 10:45 PM	#6
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	Might be interested in front bumper depending on price plus shipping. Thanks.

10-25-2003, 11:40 PM	#7
Porkchop Registered User Join Date: May 2002 Location: Dowagiac, MI US Posts: 579	How much would you want for a front bumper and outer grill?

10-26-2003, 01:55 AM	#9
Linus0014 Guest Posts: n/a	Instead of saying you are parting "twins", I think you should write Parts for sale and give a price. So far there have been three people asking for items from two parting trucks, but non of which you will sell or take the time to ship. Or even then change the thread title to "99% rust free trucks for sale." I'm not here to be negative and I hope you don't think I'm putting you down b/c its not my intent. I know people that buy from you and are REALLY happy, and I would buy items too but they aren't parts being parted on a "Parting Twins", parts board.

10-26-2003, 04:26 AM	#11
Linus0014 Guest Posts: n/a	I understand about the bed, its partly b/c I've been trying to find a door for a while now. If you don't sell the bed which I think you will find a buyer, keep me on the list for the door and hinge, will you? Once again, I hope you didn't think I was wanting to stir things up.

10-26-2003, 12:30 PM	#13
1970 CST Short Wide Senior Moment Join Date: Mar 2002 Location: Pittsburg Ca Posts: 4,196	Would you be willing to ship the interior parts and if so How much to 94565. Thanks Steve __________________ 1970 CST LS 1 6 speed Ford 9 inch Detroit Tru Track, Dakota Didgital, Vintage Air, QA1 Coil Overs Front & Rear Lots of FUN 2013 GMC PU, Oldest Son 71 GMC LWB. QA1 Suspension, Angry SB. Youngest Son 2017 Toyota SUV Daughters car 2018 Traverse , Wife’s Ride Pittsburg Ca 94565

10-26-2003, 02:04 PM	#14
PICKMUP "Trucks with Class" Join Date: Jul 2000 Location: OLYMPIA, WA, USA Posts: 8,158	Steve, Sorry, but I need to have this stuff picked up. Do you know anyone coming this way? __________________ Email: frankeham@comcast.net Phone: 360-956-7170

10-26-2003, 02:58 PM	#15
69C10Atl Trying to stick with it Join Date: Jul 2002 Location: Atlanta,GA Posts: 115	Does the 350 truck have power steering, if so how much for the pump bracket, pump pulley, and crank pulley shipped to 30360? __________________ 69 Chevy C10 LWB somewhere in the pile of parts in my garage. 01 Cadillac STS as daily driver

10-26-2003, 03:08 PM	#16
PICKMUP "Trucks with Class" Join Date: Jul 2000 Location: OLYMPIA, WA, USA Posts: 8,158	A full PS sys: box, pump & brackets & pulleys is $150 + $50 to pack & ship it. Sorry, no separate pieces available. __________________ Email: frankeham@comcast.net Phone: 360-956-7170



Register or Log In To remove these advertisements.

10-26-2003, 03:08 PM	#17
jhwkns Registered Cruiser Join Date: May 2002 Location: Las Vegas NV Posts: 2,230	Frank ; I'm ISO a black factory steering wheel, and sunvisors. Can you help? TIA __________________ I intend to live forever. So far, so good.

10-26-2003, 03:48 PM	#18
Linus0014 Guest Posts: n/a	SO far we have 6 people asking for parts from a parting trucks parts thread. But none of the items are being sold or want to ship. I bought my steering setup gearbox, pump, brackets, hoses, for 40.00 and 30.00 for shipping...Something doesn't seem right here.....

10-26-2003, 03:55 PM	#19
PICKMUP "Trucks with Class" Join Date: Jul 2000 Location: OLYMPIA, WA, USA Posts: 8,158	DINNUT Are you coming up to get that #1 truck? Better hurry! __________________ Email: frankeham@comcast.net Phone: 360-956-7170

10-26-2003, 04:02 PM	#20
67sss Registered User Join Date: Nov 2002 Location: Mt. Vernon, WA.. Posts: 2,325	SHIPPING! I don't get it, why is that people have problem with shipping stuff. Working for a freight company we see windshields, hoods, bumpers,trannys,engines,frames or whatever. If it fits into a trailer you can ship it. I think sellers just need to know that if a buyer is willing to pay the freight, it can be shipped...sorry Frank I just need to vent.......phew, I fell better now. Thanks

10-26-2003, 04:18 PM	#22
PICKMUP "Trucks with Class" Join Date: Jul 2000 Location: OLYMPIA, WA, USA Posts: 8,158	jhkwns I don't have a black wheel or visors left on the place. Black sells fast. I have two sets of those red belts--extra. Nice condition, good color, not worn, slight surface rust on buckles. $70 pr shipped. I will save the set in the pics/truck for who ever buys/picks up the complete interior. __________________ Email: frankeham@comcast.net Phone: 360-956-7170

10-26-2003, 08:05 PM	#24
Castiron9 72 LONGHORN OWNER Join Date: Sep 2002 Location: Seattle Wash. Posts: 963	Yea............. __________________ 72-SUPER CHEYENNE/20 LONGHORN 70-C/30 DUALLY

10-26-2003, 08:50 PM	#25
ratrod67 Registered User Join Date: Sep 2002 Location: DFW Texas Posts: 2,269	Shipping big parts is a pain. I just got through shipping 69 DZ 302 engine, 67 Camaro convertible top frame and a couple fenders. It's a lot of trouble to get stuff crated and palleted up so it can be shipped safely. After you find or buy the supplies and get things boxed up you hit them with the quote. Usually 90% of the people will back out because of shipping rates and supply costs. Either that or try and jew you down on the price. Shipping big stuff just isn't worth it in most cases.

Register or Log In To remove these advertisements.