Sway bars - The 1947 - Present Chevrolet & GMC Truck Message Board Network

miket · 10-21-2003, 09:23 AM

I have a chance to end up with front and rear sway bars off a 94 Caprice police car....complete with brackets. I am hoping that they will fit my 71 Cheyenne. Does anyone know if this will work? The rear ends on the caprices are 12 bolt with coils and trailing arms.

72c10step · 10-25-2003, 12:27 PM

I'm not sure about this, but a friend of mine that has an old police car says that all the 9C1 (Police Option) owners and Chevy IROC owners look for 79 Firebird swaybars, and IROCs are the ones that people said on here that bolt on to our trucks. I'd say that the rear fits, but I don't know about the front. Someone correct me if I'm wrong.

cableguy0 · 10-25-2003, 06:12 PM

just get a bar off of a truck it will be cheaper and easier in the long run these bars are different than most because of the way the bends are and how they connect to the control arms

72c10step · 10-25-2003, 10:57 PM

Cableguy is right for the front ones, I got a 1 1/4" one from a salvage yard (see my other post "Look what I found at the yard today") with brackets and everything for only $20!

10-21-2003, 09:23 AM	#1
miket Registered User Join Date: Jan 2003 Location: Seattle WA Posts: 1,466	Sway bars I have a chance to end up with front and rear sway bars off a 94 Caprice police car....complete with brackets. I am hoping that they will fit my 71 Cheyenne. Does anyone know if this will work? The rear ends on the caprices are 12 bolt with coils and trailing arms. __________________ FocuzTech Performance Evergreen Protective Coatings Gatorhyde...the best kept secret in spray in bed lining & protection Last edited by miket; 10-21-2003 at 09:26 AM.

10-25-2003, 12:27 PM	#2
72c10step WHYBYNU when old will do? Join Date: Jul 2003 Location: Loudon, NH Posts: 876	I'm not sure about this, but a friend of mine that has an old police car says that all the 9C1 (Police Option) owners and Chevy IROC owners look for 79 Firebird swaybars, and IROCs are the ones that people said on here that bolt on to our trucks. I'd say that the rear fits, but I don't know about the front. Someone correct me if I'm wrong. __________________ -72 Chevy C10 Stepside -2002 Chevy Silverado 2500HD 4x4 -1984 Jeep CJ7 -1995 Polaris XCR600 Custom -2003 Honda 300ex

10-25-2003, 06:12 PM	#3
cableguy0 Senior Member Join Date: Apr 2000 Location: Delta,Pa Posts: 14,948	just get a bar off of a truck it will be cheaper and easier in the long run these bars are different than most because of the way the bends are and how they connect to the control arms __________________ Owner of North Point Car Care in Dundalk Md. We specialize in custom exhaust on both modern and classic vehicles. We are a full service auto shop from classics to modern vehicles. Feel free to contact me with questions. I will give a 10% discount to any board member.

10-25-2003, 10:57 PM	#4
72c10step WHYBYNU when old will do? Join Date: Jul 2003 Location: Loudon, NH Posts: 876	Cableguy is right for the front ones, I got a 1 1/4" one from a salvage yard (see my other post "Look what I found at the yard today") with brackets and everything for only $20! __________________ -72 Chevy C10 Stepside -2002 Chevy Silverado 2500HD 4x4 -1984 Jeep CJ7 -1995 Polaris XCR600 Custom -2003 Honda 300ex



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.