|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
12-14-2012, 05:47 PM
|
#1 |
|
Registered User
Join Date: Dec 2012
Location: lewistown pa
Posts: 143
|
v8 and 6cyl driveshaft length
Is there any difference in length?
Posted via Mobile Device |
|
|
|
12-14-2012, 06:47 PM
|
#2 |
|
Fabricate till you "puke"
Join Date: Jun 2002
Location: Ill
Posts: 9,403
|
Re: v8 and 6cyl driveshaft length
Yes, the V8 smallblock vs the inline 6 (assuming same trans), will be 3 1/2" different in lenght. That is pluss or minus 1/8", & figured on original factory mounting points. It is best to do your own measure, do to the age of the truck.....you have to be sure that it has not been swapped before, with missmatched parts
 crazyl
__________________
69 longhorn,4" chop,3/5 drop, 1/2 ton suspension/disc brakes,1 1/2" body drop,steel tilt clip, 5.3/Edelbrock rpm intake/600 carb, Hooker streetrod shorties,2 1/2" exhaust/ H pipe/50's Flows , 6 spd Richmond trans,12 bolt/ 3.40 gears.... |
|
|
|
|
12-14-2012, 08:34 PM
|
#3 |
|
Registered User
Join Date: Dec 2012
Location: lewistown pa
Posts: 143
|
Re: v8 and 6cyl driveshaft length
Does 79.5" sound right? For a v8 4spd
Posted via Mobile Device |
|
|
|
|
12-14-2012, 09:08 PM
|
#4 |
|
Fabricate till you "puke"
Join Date: Jun 2002
Location: Ill
Posts: 9,403
|
Re: v8 and 6cyl driveshaft length
As said, you need to do the measure....check with your local driveline shop, so you get it right on
I remember ,1 time I cut a 2x4, 3 times....and it was still too short? Could not weld that back together crazyL
__________________
69 longhorn,4" chop,3/5 drop, 1/2 ton suspension/disc brakes,1 1/2" body drop,steel tilt clip, 5.3/Edelbrock rpm intake/600 carb, Hooker streetrod shorties,2 1/2" exhaust/ H pipe/50's Flows , 6 spd Richmond trans,12 bolt/ 3.40 gears.... |
|
|
|
|
12-14-2012, 09:12 PM
|
#5 |
|
Registered User
Join Date: Dec 2012
Location: lewistown pa
Posts: 143
|
Re: v8 and 6cyl driveshaft length
Got under and measured 79.5 so I was just wondering what a stock v8 manual trucks drive shaft was
Posted via Mobile Device |
|
|
|
|
| Bookmarks |
|
|
Linear Mode
