What radiator have you used on your s10 AD truck projects.

[48ChevBagged]

Originally Posted by BlueJeep

Yes, I've been doing a little searching on that, straight out is an option. See the picture above.

There is a cheap one on eBay $30something that uses a SBC thermostat...but that doesn't work well with the LS waterpump and water will bypass the heater core. There is another I've found that uses the correct style thermostat, that's the one I'm looking at.

http://www.ebay.com/itm/CBM-10613-GM...983173&vxp=mtr

I see what you are talking about now. Thats tight. I am not sure what to do now. I still believe I need both snouts on the radiator on the passenger side. I guess Im gonna have to look at mine a little closer and figure that out too. Thanks for the heads up on that. Your motor appears to be sitting in your frame alot lower than mine too. I raised mine a good bit for oil pan clearance because I didnt wanna change to the ls1 oil pan. Mine is high enough I am gonna have to figure out remounting those fender to firewall braces.