AD truck power steering brackets

[BLUE49]

I apologize for bringing up this subject again as it is the veritable dead horse. I have a 49 3100 in which I have installed the steering box and everything needed to make the wheels turn. I have read everything I can find about steering pump brackets, but I don't recall seeing any pictures of power steering set up in an AD truck. I bought the Davis speed brackets, but the pump hits the inner fender with that. I bought what was supposed to be original brackets for the 250, but the bolt arrangement is wrong for my engine.
So--- has anyone seen power steering set up in one of these trucks using the original brackets. I'm sure I can modify the Davis brackets if I have to.

[paintman]

Heres a couple of way of doing it. I am going this route with my 46 and it looks like it's goint to just clear the inner fender panels.

http://ecihotrodbrakes.com/chevrolet...ve_system.html
http://www.ebay.com/itm/Chevy-Inline...3f85a3&vxp=mtr

[mr48chev]

I've got a factory 74 Pontiac 250 six cylinder alternator/power steering bracket in the 48 and it should keep both alternator (mounted low) and pump in far enough to clear the inner fender although I took the pump off when I put it in the 48 23 years ago. It' too cold and wet to go out and take a photo now though.

[BLUE49]

The picture you posted looks like the DavisEngineering with type 2 pump. I seriously doubt that set up will fit. I will peobably go for the one on EBay which is the original bracket. Thanks for your info.

[BLUE49]

I really appreciate you guys taking the time to respond to my dilemma. Just goes to show what a great site this is and its made so by the people who post on it. Hopefully, I can return the favor some day.