|
12-24-2012, 01:39 PM
|
#1 |
|
Registered User
Join Date: Oct 2012
Location: Jamesville NY
Posts: 225
|
Tailgate Question
A few months back we picked up a 61 apache for my wife. the truck is in ok condition. Of course pics on Ebay look great. bought it, and the seller delivered it to me on a flatbed 300 miles from here.
Anyway, attached is a pic of her tailgate. A friend of mine thought maybe this gate was covered over with a kit online to give it a smooth look. We dont care for this look, we like the stock look. As anyone here heard of such kit. Maybe if I cut a few welds I can find the stock gate under it. Or I could find a basket case and make it worse. Any thoughts? |
|
|
|
12-24-2012, 01:47 PM
|
#2 |
|
Registered User
Join Date: Jan 2012
Location: Killeen, Tx
Posts: 1,352
|
Re: Tailgate Question
I bet if you remove that cover you will find what you are looking for. I have seen the kits on line. From the looks of the rear I would guess the PO was trying to go for a custom look. i would say cut the welds and see. Worst case you will have to get another tailgate.
__________________
John Z 1962 Chevy C10 Stepside 62 Barnfind My build tread: http://67-72chevytrucks.com/vboard/s...d.php?t=507513 |
|
|
|
|
12-24-2012, 02:22 PM
|
#3 |
|
Registered User
 Join Date: Aug 2010
Location: Burbank CA
Posts: 3,055
|
Re: Tailgate Question
A kit? I don't see needing anything other than a piece of sheet metal, a welder, a maybe a little filler to accomplish that look. Out West, decent rust-free tailgates are plentiful enough that I would not put the time into "undoing" the one you have. Finding one where you are might be a different story. Add shipping to the cost of buying one from out here and see if it's worth it for you.
|
|
|
|
|
12-24-2012, 03:00 PM
|
#4 |
|
Registered User
Join Date: Oct 2010
Location: Kansas City
Posts: 3,590
|
Re: Tailgate Question
I agree with oem4me. I have a 72 with POS aftermarket tailgate with a smooth finish. I've bought two used tailgates in the last 30 days, one off Craigslist, the other from a local board member. One has some rust pinholes in the very bottom that will easily fixed. The other is nearly perfect, save a couple really small dents.
If you're patient, I'm sure you'll be able to find a good one in your area.
__________________
Willie Swamp Angel Truckers '72 C10 Highlander  People who blindly follow a GPS end up on television programs on The Weather Channel. Some survive, some don't. 
|
|
|
|
|
12-24-2012, 04:42 PM
|
#5 |
|
Registered User
Join Date: Sep 2009
Location: California Delta
Posts: 2,163
|
Re: Tailgate Question
You should be able to tell if it's just a cover by looking at the inside of the tailgate for the reversed CHEVROLET stamped into the steel.
__________________
Name: Rich Current Ride: 1964 C-10 Short Fleetside Daily Driver: 2005 GMC crew cab short fleetside /2001 Chevy Tahoe Past GM Trucks: 1959 GMC short stepside 1968 GMC short stepside-4x4 1973 Chevy short stepside 1989 Chevy short fleetside-reg cab 1993 Chevy short fleetside-Xcab 2002 Chevy short fleetside-Xcab Save the dinosaurs, use synthetic oil. |
|
|
|
|
12-24-2012, 04:47 PM
|
#6 | |
|
Senior Member
 
Join Date: May 2007
Location: Doodah Kansas
Posts: 7,772
|
Re: Tailgate Question
Quote:
grind the edge to expose/cut the welds on the side and that will help you find the upper and lower edge. I think the smooth look would be better marginally if it didnt have the stock latches. I wonder what it would look like if someone kept the body line in the smoothed tailgate if that would look better?
__________________
the mass of men live lives of quiet desperation if there is a problem, I can have it. new project WAYNE http://67-72chevytrucks.com/vboard/s...d.php?t=844393 |
|
|
|
|
|
12-24-2012, 07:41 PM
|
#7 |
|
Senior Member
Join Date: Aug 2009
Location: San Leandro, Ca 94577
Posts: 854
|
Re: Tailgate Question
talk w perro13 he may have a clean Ca tailgate
|
|
|
|
|
12-25-2012, 12:03 AM
|
#8 |
|
Registered User
Join Date: Nov 2012
Location: Miles City MT
Posts: 240
|
Re: Tailgate Question
I'd start fresh with a good tail gate & scrap that ugly one.
Nothing to loose by cutting it apart though. |
|
|
|
|
12-25-2012, 11:47 AM
|
#9 |
|
Registered User
 
Join Date: Jun 2011
Location: Phoenix,AZ
Posts: 946
|
Re: Tailgate Question
i would find another tail gate. somebody out there likes your tailgate more than you do so i would sell it.
__________________
Hand Made Factory reproduction A/C vents text or call 602-361-6421 Website for A/C vents https://coolc10.com/ |
|
|
|
|
12-26-2012, 03:54 PM
|
#10 |
|
Scrapper 1
Join Date: Jan 2007
Location: Riverside Calif
Posts: 1,649
|
Re: Tailgate Question
what ever you do do not buy a after market tail gate.If you do Have a sign on it No FAT People them tail gates are cheep any weight at all will fold it and bend it
|
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
