20/22 Boyd Vtwin & porterbuilt stage 2 suspension

[Hart_Rod]

Originally Posted by 68 short step

you can use a new camaro accys. (2010- current), mounts/looks simular to f body accys. and the a/c compressor and bracket will clear...

Do you have any pictures? Thanks,

r/

[c10seconds]

Originally Posted by Hart_Rod

Do you have any pictures? Thanks,

r/

4th gen fbody ac bracket/compressor will not work with the MILD dropmember.

Hart rod, headers are 1 7/8 kooks tbss specific. Ill get you part numbers when i get home.
Because of the magnacharger i have ditched all the 4th gen accessories and went to 5th gen camaro pullies. The charger is 5th gen camaro specific
Posted via Mobile Device

[Hart_Rod]

Originally Posted by c10seconds

4th gen fbody ac bracket/compressor will not work with the MILD dropmember.

Hart rod, headers are 1 7/8 kooks tbss specific. Ill get you part numbers when i get home.
Because of the magnacharger i have ditched all the 4th gen accessories and went to 5th gen camaro pullies. The charger is 5th gen camaro specific
Posted via Mobile Device

Thanks, part numbers would be good. Any pictures of the 5th gen brackets?

[c10seconds]

Originally Posted by Hart_Rod

Thanks, part numbers would be good. Any pictures of the 5th gen brackets?

Part no.6311 on these 1 7/8

They also have the 6310 which is the 1 3/4.

Those g8 accessories look very similar to 5th gen camaro accessories.
Posted via Mobile Device

[Hart_Rod]

Originally Posted by c10seconds

Part no.6311 on these 1 7/8

They also have the 6310 which is the 1 3/4.

Those g8 accessories look very similar to 5th gen camaro accessories.
Posted via Mobile Device

Thanks for the part numbers! I'm just curious if anyone has tried the big tube Doug Thorley headers? I know the small ones don't work, but take alook at these pictures and let me know what you guys think.

[c10seconds]

Originally Posted by Hart_Rod

Thanks for the part numbers! I'm just curious if anyone has tried the big tube Doug Thorley headers? I know the small ones don't work, but take alook at these pictures and let me know what you guys think.

You know the extreme dropmember raises the motor about 3" and i would say there would be issues with the tubes hitting the firewall atleast on the passenger side. Mild dropmember would probably be ok?
Posted via Mobile Device

[Hart_Rod]

Originally Posted by c10seconds

4th gen fbody ac bracket/compressor will not work with the MILD dropmember.

Hart rod, headers are 1 7/8 kooks tbss specific. Ill get you part numbers when i get home.
Because of the magnacharger i have ditched all the 4th gen accessories and went to 5th gen camaro pullies. The charger is 5th gen camaro specific

Originally Posted by 68 short step

you can use a new camaro accys. (2010- current), mounts/looks simular to f body accys. and the a/c compressor and bracket will clear...

I think the LS1 a/c and alternator bracket would work with the extreme dropmember if the motor were moved forward 1". Thoughts?? Also, are the 2009 G8 brackets 4th or 5th Gen? Heres a picture: