Finished Interior Yesterday - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Shane22696 · 12-31-2012, 12:55 PM

Hey guys, just thought I'd share what I got done this weekend. I got this truck a month or so ago, and the shape of the interior was driving me crazy. So I got a new dash, carpet, installed Peel & Seal on the floors, and painted the inside of the cab black from the original white. Original seat was in perfect shape, so I left it alone. I'm 16 and still learning, but it looks good enough for me as a daily driver. Here's some pics

silvereagle07 · 12-31-2012, 01:04 PM

Looks good Shane. I like the grill emblem too.

R&K's71 · 12-31-2012, 05:40 PM

Good job, looks great.

**N2TRUX** · 12-31-2012, 05:40 PM

Nice updates. Now clean those wires up under the dash before they cause a problem...

Shane22696 · 01-01-2013, 02:21 AM

That will be soon, getting a new dash harness so I can switch to gauges and replace the chewed up one thats in there. Those wires on the bottom are just going to the gauges, not sure why the PO routed them on the outside of the dash. Those gauges will be getting replaced with a summit 3 gauge pod too

STOCKISH · 01-01-2013, 10:53 AM

Good work man, keep it up.

sethv · 01-01-2013, 05:24 PM

Looks nice man! Want to do my interior too?

It's in worse shape than yours probably was.

Where'd ya get the carpet?

Damon23 · 01-01-2013, 05:29 PM

Bravo. Keep at it. You are doing good work. I'm going to do the peel and seal or the duct wrapping on my floor when I replace the aftermarket seat in my truck for a bench.

Shane22696 · 01-01-2013, 06:23 PM

I got the carpet from rockauto, it's an ACC kit. I paid $127 shipped. It needed to be trimmed a fair amount but it wasn't too bad. I'd definitely recommend the peel and seal, it made a huge difference in noise in the cab. I got two rolls, and it barely was enough so if you do it go ahead and get three.

1978chevybigten · 01-01-2013, 07:28 PM

looks awesome!!

ZMAR · 01-02-2013, 12:24 AM

Where did you buy all the interior pieces?
Posted via Mobile Device

Shane22696 · 01-02-2013, 01:53 AM

the only thing i had to buy was the carpet, everything else i alreay had in the garage from previous trucks

Pop's C-10 · 01-02-2013, 04:27 AM

nice..

Shane22696 · 01-02-2013, 02:44 PM

Thanks for the comments everyone. Only problem I'm having is the top of the glove box door hits the bottom of the dash now and won't open without a lot of force. Anybody got any idea how to correct that?

12-31-2012, 12:55 PM	#1
Shane22696 Registered User Join Date: Jul 2011 Location: Zebulon GA Posts: 128	Finished Interior Yesterday Hey guys, just thought I'd share what I got done this weekend. I got this truck a month or so ago, and the shape of the interior was driving me crazy. So I got a new dash, carpet, installed Peel & Seal on the floors, and painted the inside of the cab black from the original white. Original seat was in perfect shape, so I left it alone. I'm 16 and still learning, but it looks good enough for me as a daily driver. Here's some pics Attached Images __________________ 80 K10 350 4 spd 4 Inch lift, 33 inch BFG M/t

12-31-2012, 01:04 PM	#2
silvereagle07 Registered User Join Date: Sep 2008 Location: Bailey, NC Posts: 2,462	Re: Finished Interior Yesterday Looks good Shane. I like the grill emblem too. __________________ Jeramy '84 GMC project truck '85 Chevy 4X4 SOLD '07 Chevy Trailblazer SS 5th Annual SHPHC Car/Truck Show Pics http://67-72chevytrucks.com/vboard/s...d.php?t=543605 UPDATED PICS! CHECK 'EM OUT

12-31-2012, 05:40 PM	#3
R&K's71 Registered User Join Date: May 2011 Location: Silex Mo Posts: 180	Re: Finished Interior Yesterday Good job, looks great.

12-31-2012, 05:40 PM	#4
N2TRUX Happy to be here Join Date: Mar 2000 Location: Cypress, TX Posts: 39,021	Re: Finished Interior Yesterday Nice updates. Now clean those wires up under the dash before they cause a problem... __________________ Follow me on Facebook and Instagram @N2trux.com Articles- "Jake" the 84 to 74 crewcab "Elwood" the77_Remix 85 GMC Sierra "Scarlett" "Refining Sierra"

01-01-2013, 02:21 AM	#5
Shane22696 Registered User Join Date: Jul 2011 Location: Zebulon GA Posts: 128	Re: Finished Interior Yesterday That will be soon, getting a new dash harness so I can switch to gauges and replace the chewed up one thats in there. Those wires on the bottom are just going to the gauges, not sure why the PO routed them on the outside of the dash. Those gauges will be getting replaced with a summit 3 gauge pod too __________________ 80 K10 350 4 spd 4 Inch lift, 33 inch BFG M/t Last edited by Shane22696; 01-01-2013 at 02:41 AM.

01-01-2013, 10:53 AM	#6
STOCKISH Formerly- 1972SuperCheyenne Join Date: Oct 2008 Location: Wake Forest NC Posts: 5,782	Re: Finished Interior Yesterday Good work man, keep it up. __________________ --Josh My Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=799218 A good crossthread is better than Loctite any day. Life is not about what you have, but who you have to share it with.

01-01-2013, 05:24 PM	#7
sethv Registered User Join Date: May 2011 Location: Bradford, PA Posts: 395	Re: Finished Interior Yesterday Looks nice man! Want to do my interior too? It's in worse shape than yours probably was. Where'd ya get the carpet? __________________ 1981 K10 Scottsdale 305 ci \| TH350 \| NP208 \| 60k miles

01-01-2013, 05:29 PM	#8
Damon23 Registered User Join Date: Sep 2009 Location: D'ville Georgia Posts: 470	Re: Finished Interior Yesterday Bravo. Keep at it. You are doing good work. I'm going to do the peel and seal or the duct wrapping on my floor when I replace the aftermarket seat in my truck for a bench.

01-01-2013, 06:23 PM	#9
Shane22696 Registered User Join Date: Jul 2011 Location: Zebulon GA Posts: 128	Re: Finished Interior Yesterday I got the carpet from rockauto, it's an ACC kit. I paid $127 shipped. It needed to be trimmed a fair amount but it wasn't too bad. I'd definitely recommend the peel and seal, it made a huge difference in noise in the cab. I got two rolls, and it barely was enough so if you do it go ahead and get three. __________________ 80 K10 350 4 spd 4 Inch lift, 33 inch BFG M/t

01-01-2013, 07:28 PM	#10
1978chevybigten Registered User Join Date: Jun 2012 Location: dfw Posts: 183	Re: Finished Interior Yesterday looks awesome!! __________________ 1978 big ten 350/350:chevy

01-02-2013, 12:24 AM	#11
ZMAR Registered User Join Date: Aug 2012 Location: Breck, tx Posts: 147	Re: Finished Interior Yesterday Where did you buy all the interior pieces? Posted via Mobile Device __________________ 71 c10 swb

01-02-2013, 01:53 AM	#12
Shane22696 Registered User Join Date: Jul 2011 Location: Zebulon GA Posts: 128	Re: Finished Interior Yesterday the only thing i had to buy was the carpet, everything else i alreay had in the garage from previous trucks __________________ 80 K10 350 4 spd 4 Inch lift, 33 inch BFG M/t

01-02-2013, 04:27 AM	#13
Pop's C-10 Registered User Join Date: Jul 2010 Location: memphis Posts: 2,537	Re: Finished Interior Yesterday nice.. __________________ 1981 C-10 (Pop's) 1978 Camaro 2006 Lacrosse

01-02-2013, 02:44 PM	#14
Shane22696 Registered User Join Date: Jul 2011 Location: Zebulon GA Posts: 128	Re: Finished Interior Yesterday Thanks for the comments everyone. Only problem I'm having is the top of the glove box door hits the bottom of the dash now and won't open without a lot of force. Anybody got any idea how to correct that? __________________ 80 K10 350 4 spd 4 Inch lift, 33 inch BFG M/t



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.