What is the best source to buy a clutch, - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Juspassinthru · 01-02-2013, 04:52 PM

250 6cyl, factory 3 speed 66
Posted via Mobile Device

Sundy · 01-02-2013, 05:09 PM

And how hard is it to replace a clutch? (66, 6 cyl, 4 speed) I've done this on motorcycles....so the parts are just heavier right?

I bought the shop manual for the 66 but it's just suplimental. What is the main manual I need and will it show how to change the clutch?

Thanks!

63sbssbbw · 01-02-2013, 06:24 PM

1963

Juspassinthru · 01-02-2013, 07:23 PM

1963?
Posted via Mobile Device

Tx Firefighter · 01-02-2013, 09:46 PM

Buy your clutch local. They are heavy and you don't want to have to pay shipping on it.

Get a complete kit with clutch, pressure plate, and throwout bearing. Have your flywheel resurfaced by any automotive machine or driveline shop while you have it apart.

Swapping the clutch in your truck is the easiest one out there. You remove the transmission but leave the bellhousing in place. Then unbolt the clutch parts and drop them out the bottom of the bellhousing. Most vehicles, you have to remove the bellhousing. GM did this one real well when they designed it.

Sundy · 01-03-2013, 09:19 AM

Cool, thanks. Is there a way to improve how the clutch engages or will just replacing the clutch do that? What I mean is, there's about 3/4" of play on the pedal between the transmission being engaged and disengaged. It's OK when I'm moving but gently pulling into my tight garage space is difficult. My 4Runner feels like it has about 3+ inches of play. That's what I'm looking for...I think.

Tx Firefighter · 01-03-2013, 09:41 AM

Quote:

Originally Posted by Sundy

Cool, thanks. Is there a way to improve how the clutch engages or will just replacing the clutch do that? What I mean is, there's about 3/4" of play on the pedal between the transmission being engaged and disengaged. It's OK when I'm moving but gently pulling into my tight garage space is difficult. My 4Runner feels like it has about 3+ inches of play. That's what I'm looking for...I think.

Mess with the adjustment. It's the threaded rod between the z-bar and the fork that comes out of the bellhousing. You can lengthen or shorten it to change the point where the clutch engages. You might be able to adjust it to a point where it feels like you want it to.

Sundy · 01-03-2013, 09:51 AM

Thanks, I'll work with that and see if it improves.

Juspassinthru · 01-03-2013, 10:31 AM

Called to order my clutch snd they iffer a 10" and11"?? Anyway to tellbefore removing the old one??
Posted via Mobile Device

01-02-2013, 04:52 PM	#1
Juspassinthru Registered User Join Date: Dec 2012 Location: Atl ga Posts: 60	What is the best source to buy a clutch, 250 6cyl, factory 3 speed 66 Posted via Mobile Device

01-02-2013, 05:09 PM	#2
Sundy Registered User Join Date: Dec 2012 Location: Chantilly, VA Posts: 33	Re: What is the best source to buy a clutch, And how hard is it to replace a clutch? (66, 6 cyl, 4 speed) I've done this on motorcycles....so the parts are just heavier right? I bought the shop manual for the 66 but it's just suplimental. What is the main manual I need and will it show how to change the clutch? Thanks!

01-02-2013, 06:24 PM	#3
63sbssbbw UCA63 Join Date: Aug 2005 Location: Lloydminster AB Can. Posts: 1,637	Re: What is the best source to buy a clutch, 1963 __________________ member#7816 "63 sb ss bbw 350\350 12 bolt rear Pwr Fr Disc PS tilt '61 GMC in progress '63 GMC to use for parts '90 Chevy Ext cab sbfs 5.7l (current d d)

01-02-2013, 07:23 PM	#4
Juspassinthru Registered User Join Date: Dec 2012 Location: Atl ga Posts: 60	Re: What is the best source to buy a clutch, 1963? Posted via Mobile Device

01-02-2013, 09:46 PM	#5
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	Re: What is the best source to buy a clutch, Buy your clutch local. They are heavy and you don't want to have to pay shipping on it. Get a complete kit with clutch, pressure plate, and throwout bearing. Have your flywheel resurfaced by any automotive machine or driveline shop while you have it apart. Swapping the clutch in your truck is the easiest one out there. You remove the transmission but leave the bellhousing in place. Then unbolt the clutch parts and drop them out the bottom of the bellhousing. Most vehicles, you have to remove the bellhousing. GM did this one real well when they designed it.

01-03-2013, 09:19 AM	#6
Sundy Registered User Join Date: Dec 2012 Location: Chantilly, VA Posts: 33	Re: What is the best source to buy a clutch, Cool, thanks. Is there a way to improve how the clutch engages or will just replacing the clutch do that? What I mean is, there's about 3/4" of play on the pedal between the transmission being engaged and disengaged. It's OK when I'm moving but gently pulling into my tight garage space is difficult. My 4Runner feels like it has about 3+ inches of play. That's what I'm looking for...I think.

01-03-2013, 09:51 AM	#8
Sundy Registered User Join Date: Dec 2012 Location: Chantilly, VA Posts: 33	Re: What is the best source to buy a clutch, Thanks, I'll work with that and see if it improves.

01-03-2013, 10:31 AM	#9
Juspassinthru Registered User Join Date: Dec 2012 Location: Atl ga Posts: 60	Re: What is the best source to buy a clutch, Called to order my clutch snd they iffer a 10" and11"?? Anyway to tellbefore removing the old one?? Posted via Mobile Device



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.