removing e-brake cable sleeve - The 1947 - Present Chevrolet & GMC Truck Message Board Network

geezer#99 · 01-04-2013, 10:35 AM

JFYI bigd65 you don't need to break off the prongs to get them out. Use a small hose clamp. OPen it up, slide it over the cable, screw it back togethor, slide it down over the prongs, tighten it up and the prongs are compressed and the cable slides out.
EZ PZ!!

Ville K · 01-04-2013, 11:43 AM

Quote:

Originally Posted by geezer#99

JFYI bigd65 you don't need to break off the prongs to get them out. Use a small hose clamp. OPen it up, slide it over the cable, screw it back togethor, slide it down over the prongs, tighten it up and the prongs are compressed and the cable slides out.
EZ PZ!!

I have used 1/2" wrench for that. Slide the loop end over the cable and pull the cable down, easy.

01-04-2013, 10:35 AM	#1
geezer#99 Registered User Join Date: Aug 2009 Location: Bowser Posts: 13,787	Re: removing e-brake cable sleeve JFYI bigd65 you don't need to break off the prongs to get them out. Use a small hose clamp. OPen it up, slide it over the cable, screw it back togethor, slide it down over the prongs, tighten it up and the prongs are compressed and the cable slides out. EZ PZ!!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.