VT WTB: cab patch panel - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Rochlow · 12-30-2012, 11:03 PM

Looking for the pinch weld portion of the bottom drivers side toe board. From the cab support over to the trans tunnel. Below is what mine looks like now.

Posted via Mobile Device

Rochlow · 12-31-2012, 12:10 PM

Nobody?
Posted via Mobile Device

**Todd68Chevy** · 12-31-2012, 06:24 PM

I may have a good section in a cab that I am parting out http://67-72chevytrucks.com/vboard/s...d.php?t=556770 but with the snow on it will be a little while before I can check it and cut it out. If you are not in a hurry and nobody else comes up with one, I will check when I can.

bowtiebubba · 12-31-2012, 10:50 PM

I made mine out of some sheet metal. Hammer it over a 2x4 to bend it. I would post pics but I can't in a started thread for some reason.
Posted via Mobile Device

DD1 · 01-01-2013, 05:10 PM

I might be able to help you with that. If you are talking about the area, I think you are, I did the same thing on the passenger side of a cab I bought, cutting the patch out of my original cab. That's where the floor board and the firewall meet, correct?

I'll check my cab and see what kind of shape it's in; I am pretty sure it's in decent shape. Please just confirm that we are talking about the same thing.

Rochlow · 01-01-2013, 07:04 PM

That is the piece I'm looking for. If you don't mind sending a picture that would be great. I have an extra cab and might try to cut it out and piece together.
Posted via Mobile Device

DD1 · 01-01-2013, 07:45 PM

I can send you a pic tomorrow. It's a bit too cold to go out to my garage right now. If you have an extra cab, you should be able to pull off cutting it out and patching it; that's exactly what I did. It's certainly easier and faster than my cutting out something you already have and sending it to you.

The cab I bought was in an accident and the spot welds had separated on the passenger side. Rather than try to bang it back into shape and re-spot weld it (I did try and it was not so successful), I decided to cut the perfectly welded piece out of my old cab.

Take a look at page 6 of my thread to see what I did. http://67-72chevytrucks.com/vboard/s...=502964&page=6

**Todd68Chevy** · 01-05-2013, 03:53 PM

Are you still looking for a patch panel or have you figured something else out?

If you are still looking, howmuch of this do you want? How much above and below the seem and from where to where from side to side?

Rochlow · 01-05-2013, 04:03 PM

Quote:

Originally Posted by Todd68Chevy

Are you still looking for a patch panel or have you figured something else out?

If you are still looking, howmuch of this do you want? How much above and below the seem and from where to where from side to side?

Think I have something figured out for now. My plans might change as I actually start cutting it out. If it does, I will let you know the measurement and see where we can go from there.

12-30-2012, 11:03 PM	#1
Rochlow Registered User Join Date: Aug 2006 Location: St. Albans, Vt Posts: 2,520	WTB: cab patch panel Looking for the pinch weld portion of the bottom drivers side toe board. From the cab support over to the trans tunnel. Below is what mine looks like now. Posted via Mobile Device

12-31-2012, 12:10 PM	#2
Rochlow Registered User Join Date: Aug 2006 Location: St. Albans, Vt Posts: 2,520	Re: WTB: cab patch panel Nobody? Posted via Mobile Device

12-31-2012, 06:24 PM	#3
Todd68Chevy Senior Member Join Date: Oct 2009 Location: Shelburn Indiana Posts: 3,975	Re: WTB: cab patch panel I may have a good section in a cab that I am parting out http://67-72chevytrucks.com/vboard/s...d.php?t=556770 but with the snow on it will be a little while before I can check it and cut it out. If you are not in a hurry and nobody else comes up with one, I will check when I can. __________________ Note: All parts I have for sale are also for sale locally. I currently own: 1940 Chevy Fire truck (project), 1946 Chevy truck (project), 1946 Chevy 1 Ton pick up, 1953 Chevy school bus (storage area), 1968 Chevy C10 (I have drove for 26 years), 1994 Chevy C2500 (daily driver), 2005 GMC crew cab K2500 (parts hauler) and more trucks for parts.

12-31-2012, 10:50 PM	#4
bowtiebubba Registered User Join Date: Jun 2008 Location: joplin mo Posts: 37	Re: WTB: cab patch panel I made mine out of some sheet metal. Hammer it over a 2x4 to bend it. I would post pics but I can't in a started thread for some reason. Posted via Mobile Device

01-01-2013, 05:10 PM	#5
DD1 Registered User Join Date: Aug 2011 Location: new york, ny Posts: 1,063	Re: WTB: cab patch panel I might be able to help you with that. If you are talking about the area, I think you are, I did the same thing on the passenger side of a cab I bought, cutting the patch out of my original cab. That's where the floor board and the firewall meet, correct? I'll check my cab and see what kind of shape it's in; I am pretty sure it's in decent shape. Please just confirm that we are talking about the same thing.

01-01-2013, 07:04 PM	#6
Rochlow Registered User Join Date: Aug 2006 Location: St. Albans, Vt Posts: 2,520	Re: WTB: cab patch panel That is the piece I'm looking for. If you don't mind sending a picture that would be great. I have an extra cab and might try to cut it out and piece together. Posted via Mobile Device

01-01-2013, 07:45 PM	#7
DD1 Registered User Join Date: Aug 2011 Location: new york, ny Posts: 1,063	Re: WTB: cab patch panel I can send you a pic tomorrow. It's a bit too cold to go out to my garage right now. If you have an extra cab, you should be able to pull off cutting it out and patching it; that's exactly what I did. It's certainly easier and faster than my cutting out something you already have and sending it to you. The cab I bought was in an accident and the spot welds had separated on the passenger side. Rather than try to bang it back into shape and re-spot weld it (I did try and it was not so successful), I decided to cut the perfectly welded piece out of my old cab. Take a look at page 6 of my thread to see what I did. http://67-72chevytrucks.com/vboard/s...=502964&page=6

01-05-2013, 03:53 PM	#8
Todd68Chevy Senior Member Join Date: Oct 2009 Location: Shelburn Indiana Posts: 3,975	Re: WTB: cab patch panel Are you still looking for a patch panel or have you figured something else out? If you are still looking, howmuch of this do you want? How much above and below the seem and from where to where from side to side? __________________ Note: All parts I have for sale are also for sale locally. I currently own: 1940 Chevy Fire truck (project), 1946 Chevy truck (project), 1946 Chevy 1 Ton pick up, 1953 Chevy school bus (storage area), 1968 Chevy C10 (I have drove for 26 years), 1994 Chevy C2500 (daily driver), 2005 GMC crew cab K2500 (parts hauler) and more trucks for parts.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.