IN 1967 Chevy Bare Cab W/ Title Large Back Window and A/C - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Todd68Chevy** · 10-04-2012, 09:20 PM

Quote:

Originally Posted by ultrahd4me

Payment sent. Thanks again Todd. Also let me know if you end up coming to Nashville to the swap meet.

Payment received, I will try to have it in the mail tomorrow. Thanks

If you hear of any other swap meets keep me in mind and I will let you know if I come down that way to any. The one you told me about sounds possible. I will be coming thru that area around New Years because I am going down the Huntsville, AL for New Years Eve.

**Todd68Chevy** · 10-05-2012, 02:05 PM

Quote:

Originally Posted by ultrahd4me

That will work. Sending payment shortly.
Thanks

It is in the mail. Thanks

ultrahd4me · 10-13-2012, 11:11 AM

Package arrived safe and sound. Thanks Todd

**Todd68Chevy** · 10-13-2012, 08:18 PM

Quote:

Originally Posted by ultrahd4me

Package arrived safe and sound. Thanks Todd

Great to hear, Thanks

Pmarti69 · 12-24-2012, 09:42 PM

Todd,

I see your cab has what I am looking for. Here my picture of the panel I m looking. Let me know what your asking price and shipping to 77345 (pending).

Thanks Paul

**Todd68Chevy** · 12-24-2012, 10:09 PM

Quote:

Originally Posted by Pmarti69

Todd,

I see your cab has what I am looking for. Here my picture of the panel I m looking. Let me know what your asking price and shipping to 77345 (pending).

Thanks Paul

That part of this cab is already gone but let me check my other cabs and I will let you know as soon as I can but it is supposed to start snowing so it might be a little while. Thanks

Pmarti69 · 12-25-2012, 06:18 PM

Quote:

Originally Posted by Todd68Chevy

That part of this cab is already gone but let me check my other cabs and I will let you know as soon as I can but it is supposed to start snowing so it might be a little while. Thanks

Ok thanks. Just when you have time.

Thanks Paul
Posted via Mobile Device

Red Tractors · 12-25-2012, 09:55 PM

Todd,

Sent you a PM earlier, let me know when you have a chance.

**Todd68Chevy** · 12-25-2012, 10:04 PM

Quote:

Originally Posted by Red Tractors

Todd,

Sent you a PM earlier, let me know when you have a chance.

I have some trucks that are still together but they all need work. I sure I have some with a good roof but the floors would be the main problem. There is a snow storm coming thru tonight and might get up to 10 inches and blizard conditions tomorrow so it will be a little while before I can recheck what I have. I really dought I have anything worth the drive. I went to college in Lima and it was a 4 1/2 hour drive. I will let you know. Thanks

Red Tractors · 12-25-2012, 10:17 PM

Thanks Todd,

When you have a chance, stay warm and no hurry.

I'm not worried about the drive, having no luck locally. (My "Parts truck" became another project.)

Thanks again.

Pmarti69 · 12-26-2012, 09:32 PM

Thanks Todd for your help, found a member that has the cab part I need. If you have any rear wheel well I could use those

budman k20 · 12-27-2012, 11:02 AM

Do you still have the firewall section? I'm looking for the AC section of the firewall to convert my non AC cab.

**Todd68Chevy** · 12-27-2012, 06:24 PM

Quote:

Originally Posted by Pmarti69

Thanks Todd for your help, found a member that has the cab part I need. If you have any rear wheel well I could use those

Good to hear. The only good wheel tubs I have are in a nice bed that I have for sale. I will let you know on the other items. Thanks

Quote:

Originally Posted by budman k20

Do you still have the firewall section? I'm looking for the AC section of the firewall to convert my non AC cab.

I had another member interested in it thru a WTB ad but I think he is passing so I do not think this one is sold. It will be this weekend before I can do anything with it. Thanks

**Todd68Chevy** · 12-30-2012, 11:00 PM

Quote:

Originally Posted by budman k20

Do you still have the firewall section? I'm looking for the AC section of the firewall to convert my non AC cab.

Here is what I cut out. I think it covers all the holes needed for the a/c system. I do not know how much you will use but the edge beside where the blower motor sits is poor. I tried to picture but it did not turn out good. I would take $25.00 plus shipping for the part pictured. I need a zip code to figure a shipping quote. Thanks

budman k20 · 01-02-2013, 06:36 PM

Sorry for the later relpy. Shiping to 55112. I will take it if the shipping isnt crazy high

**Todd68Chevy** · 01-02-2013, 08:13 PM

Quote:

Originally Posted by budman k20

Sorry for the later relpy. Shiping to 55112. I will take it if the shipping isnt crazy high

I can go $40.00 including shipping USPS Parcel Post or $53.00 shipped USPS Priority Mail. Thanks

budman k20 · 01-03-2013, 08:45 AM

PM sent with payment and shipping info

**Todd68Chevy** · 01-05-2013, 08:26 PM

Quote:

Originally Posted by budman k20

PM sent with payment and shipping info

It was in the mail yesterday. Thanks

10-13-2012, 11:11 AM	#53
ultrahd4me Registered User Join Date: Dec 2006 Location: Gallatin, Tn Posts: 676	Re: 1967 Chevy Bare Cab W/ Title Large Back Window and A/C Package arrived safe and sound. Thanks Todd

12-24-2012, 09:42 PM	#55
Pmarti69 Registered User Join Date: Feb 2012 Location: North of Houston, Tx Posts: 346	Re: 1967 Chevy Bare Cab W/ Title Large Back Window and A/C Todd, I see your cab has what I am looking for. Here my picture of the panel I m looking. Let me know what your asking price and shipping to 77345 (pending). Thanks Paul Attached Images __________________ Houston Area Lawman 72 GMC Fleetside (AKA: MERLIN) ZZ4 Crate Engine TH400 with Stage two kit

12-25-2012, 09:55 PM	#58
Red Tractors Registered User Join Date: Oct 2012 Location: Northern OH Posts: 72	Re: 1967 Chevy Bare Cab W/ Title Large Back Window and A/C Todd, Sent you a PM earlier, let me know when you have a chance. __________________ I still have a few more stupid questions left to be asked. '72 C-10 LWB step side "Old Red" '71 C-10 Cheyenne "Blue"

12-25-2012, 10:17 PM	#60
Red Tractors Registered User Join Date: Oct 2012 Location: Northern OH Posts: 72	Re: 1967 Chevy Bare Cab W/ Title Large Back Window and A/C Thanks Todd, When you have a chance, stay warm and no hurry. I'm not worried about the drive, having no luck locally. (My "Parts truck" became another project.) Thanks again. __________________ I still have a few more stupid questions left to be asked. '72 C-10 LWB step side "Old Red" '71 C-10 Cheyenne "Blue"

12-26-2012, 09:32 PM	#61
Pmarti69 Registered User Join Date: Feb 2012 Location: North of Houston, Tx Posts: 346	Re: 1967 Chevy Bare Cab W/ Title Large Back Window and A/C Thanks Todd for your help, found a member that has the cab part I need. If you have any rear wheel well I could use those __________________ Houston Area Lawman 72 GMC Fleetside (AKA: MERLIN) ZZ4 Crate Engine TH400 with Stage two kit

12-27-2012, 11:02 AM	#62
budman k20 1972 K20 Join Date: Apr 2008 Location: Greenfield MN Posts: 360	Re: 1967 Chevy Bare Cab W/ Title Large Back Window and A/C Do you still have the firewall section? I'm looking for the AC section of the firewall to convert my non AC cab.

01-02-2013, 06:36 PM	#65
budman k20 1972 K20 Join Date: Apr 2008 Location: Greenfield MN Posts: 360	Re: 1967 Chevy Bare Cab W/ Title Large Back Window and A/C Sorry for the later relpy. Shiping to 55112. I will take it if the shipping isnt crazy high

01-03-2013, 08:45 AM	#67
budman k20 1972 K20 Join Date: Apr 2008 Location: Greenfield MN Posts: 360	Re: 1967 Chevy Bare Cab W/ Title Large Back Window and A/C PM sent with payment and shipping info



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.