|
12-27-2012, 10:42 AM
|
#1 |
|
Registered User
Join Date: Mar 2011
Location: Almonte, Ontario, Canada
Posts: 155
|
K10 Tie rod help...
I'm having a bit of trouble locating a tie rod adjustment sleeve (wheel to wheel) for my 72 K10. The tie rod ends are easy enough to find, but no listing for the long sleeve. I had a little trouble with a chain and pulling my wife's car out of a snow bank, now I've got a bit of a major "toe in".....
Is there any interchangeable listings? Or am I gonna have to hit the parts board? Thanx |
|
|
|
12-27-2012, 10:46 AM
|
#2 |
|
The Few, The Proud
 
Join Date: Jun 2007
Location: Ball Ground, Georgia
Posts: 1,830
|
Re: K10 Tie rod help...
It's not reproduced. You'll have to find an OE used one.
__________________
Shannon |
|
|
|
|
12-28-2012, 12:30 PM
|
#3 |
|
Registered User
Join Date: Mar 2011
Location: Almonte, Ontario, Canada
Posts: 155
|
Re: K10 Tie rod help...
Has anyone ever had one made? Could a good machine shop produce one? Could the old one be straightened?
|
|
|
|
|
12-28-2012, 03:20 PM
|
#4 |
|
Registered User
Join Date: Jul 2010
Location: Knoxville,TN
Posts: 1,185
|
Re: K10 Tie rod help...
Yes one could make one from Dom tube, any machine shop can tap the threads for the stock rod ends. I do them all the time in 1.5 x 2.50 wall but that's over kill for what you need.
You could try to have it straighten but depends on how bad. If it's real bad wouldn't even try it.
__________________
1972 Custom Deluxe 20 4x4 burb 1971 GMC SWB CST 4x4 1972 GMC k20 4x4 (X- brush truck ) 1971 Chevy CST Blazer 4x4 1971 Chevy C/10 1970 Cab Chassis C30 157" 1971 Cab Chassis Custom 30 Deluxe 157" 292/4spd ( Napco Replica ) 1988 Chevy V30 4x4 wrecker challenger 4812 |
|
|
|
|
01-06-2013, 07:35 PM
|
#5 |
|
Registered User
Join Date: Jul 2010
Location: Knoxville,TN
Posts: 1,185
|
Re: K10 Tie rod help...
Napa has a listing for the tie rod bar RPC 27644
Thanks
__________________
1972 Custom Deluxe 20 4x4 burb 1971 GMC SWB CST 4x4 1972 GMC k20 4x4 (X- brush truck ) 1971 Chevy CST Blazer 4x4 1971 Chevy C/10 1970 Cab Chassis C30 157" 1971 Cab Chassis Custom 30 Deluxe 157" 292/4spd ( Napco Replica ) 1988 Chevy V30 4x4 wrecker challenger 4812 |
|
|
|
|
01-06-2013, 08:06 PM
|
#6 |
|
Registered User
Join Date: Dec 2008
Location: Clarkston, Michigan
Posts: 465
|
Re: K10 Tie rod help...
i picked up a used one off a 78' Blazer and it bolted right on. also OFF-ROAD DESIGN sells a heavy duty replacement.
|
|
|
|
|
01-07-2013, 08:08 AM
|
#7 |
|
Registered User
Join Date: Mar 2011
Location: Almonte, Ontario, Canada
Posts: 155
|
Re: K10 Tie rod help...
Thank you. I had a friend with an exhaust bender fix up the slight bend I had to get me through,but this info is handy for replacing in warmer weather....
|
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
