Switching crew from 8 to 5 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

meatwagon83 · 01-07-2013, 10:26 PM

if your gonna do that, idk, spindles on out would make sense

comegetsome2003 · 01-07-2013, 10:37 PM

Go to the junkyard and pull the upper and lower control arms and 5 lug spindles/hubs/brake calipers and bolt them on ur truck.....i'd prolly grab some new inner and outer tie rod ends from parts store....and most likely balljoints cause its doubtful you will get lucky enough to find one with new/good ones
Posted via Mobile Device

01-07-2013, 10:26 PM	#1
meatwagon83 Registered User Join Date: Dec 2012 Location: Preble county ohio Posts: 1,914	Re: Switching crew from 8 to 5 if your gonna do that, idk, spindles on out would make sense

01-07-2013, 10:37 PM	#2
comegetsome2003 Registered User Join Date: Dec 2012 Location: Baxley Ga Posts: 83	Re: Switching crew from 8 to 5 Go to the junkyard and pull the upper and lower control arms and 5 lug spindles/hubs/brake calipers and bolt them on ur truck.....i'd prolly grab some new inner and outer tie rod ends from parts store....and most likely balljoints cause its doubtful you will get lucky enough to find one with new/good ones Posted via Mobile Device __________________ 1991 Square CCLB Dually...laid out on 22s with an old noisy 12 valve



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.