NH 1967 3 Hole Speedwarning Dash - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Shaun1162 · 12-22-2012, 11:22 PM

Well, wasn't going to get rid of it... But I don't really forsee myself buying a '67 anytime soon, and so maybe someone on here would like to buy this original '67 speedwarning dash....

I have the original buzzer that goes with the dash (can get photo if needed), but I have no way to test it so it's sold as-is. The knob on the dash doesn't turn the speedwarning needle easily, but if you mess with the cable on the back, it will turn the needle so it's not stuck or anything. Probably just needs to be cleaned.

The knob is cracked, and the needles are faded as you can see. The bezel itself is not the greatest- usual cracks around the screw holes, and faded lettering for light, choke, etc. The silver around the edge of the bezel is in decent shape, with some wear and tear. Would look pretty good in an original/patina style truck.

The date on the back is '66. There doesn't look to be any burnt spots on the ciruit, or any real bad seperation between the layers. Some surface rust on the top of the tin, but nothing bad. Has the original brass pin on the back, and the circuit has the cut-out for it so it is definately an original speedwarning dash....

Don't really have to sell it, but figured someone on here might be looking for one for their '67. I know I've never seen another one....

$300 Shipped.

mo · 12-22-2012, 11:28 PM

Do you have the harness or the buzzer?
Posted via Mobile Device

Shaun1162 · 12-22-2012, 11:35 PM

Quote:

Originally Posted by mo

Do you have the harness or the buzzer?
Posted via Mobile Device

I have the original buzzer, and a small part of the harness. Would definately need a new harness... But I think they're about $15-$20 for a new one.

mo · 12-22-2012, 11:43 PM

so very tempting! somebody grab it before i do please

**bcnya2** · 12-22-2012, 11:43 PM

Would this work on a 72? I understand it was prob not an option....but who cares... if I puchase a tach dash, what would be involved in getting this transferred over and making it function? What is the best you could go on the price?......thanks, Greg
Posted via Mobile Device

Shaun1162 · 12-22-2012, 11:48 PM

Quote:

Originally Posted by bcnya2

Would this work on a 72? I understand it was prob not an option....but who cares... if I puchase a tach dash, what would be involved in getting this transferred over and making it function? What is the best you could go on the price?......thanks, Greg
Posted via Mobile Device

This particular dash I'm not sure would work in a '72. Don't know the technical differences, but obviously the 3 hole dash has less components then the usual dash offered from 67-72. Someone might correct me on that though....

As for adding it to another dash- I am not sure how difficult it is. You would need a brass pin or something similar on the rear tin- I beleive this pin is to ground the speedwarning unit. Then of course you would have to drill a couple holes for the cable, etc.

mo · 12-22-2012, 11:50 PM

Ive done a couple and the transfer requires some patience and super tiny cutoff wheel. These things are getting pretty hard to find...it would be a pretty cool project.

**bcnya2** · 12-22-2012, 11:58 PM

Would you take $225? If so, I will paypal you now. Greg
Posted via Mobile Device

Shaun1162 · 12-23-2012, 12:00 AM

Pretty firm at $300 Shipped.

**daddymoo2** · 12-23-2012, 12:03 AM

I would do 275.00 shipped and will pay ASAP. Thanks
Posted via Mobile Device

**bcnya2** · 12-23-2012, 12:05 AM

I offered $225.....can you work somewhere in between? $275
Posted via Mobile Device

**leddzepp** · 12-23-2012, 12:07 AM

$300 Shipped is a good price for this.

**daddymoo2** · 12-23-2012, 12:08 AM

I will take it. Thanks
Posted via Mobile Device

nobolt · 12-23-2012, 12:10 AM

interesting that the original owner optioned for the speed sensor and no gauges...i would have liked to seen the SPID.

Shaun1162 · 12-23-2012, 12:19 AM

Quote:

Originally Posted by daddymoo2

I will take it. Thanks
Posted via Mobile Device

Sold Pending Payment.

(Boy that was fast.... Shoulda asked more I guess!

)

Shaun1162 · 12-23-2012, 12:21 AM

Quote:

Originally Posted by nobolt

interesting that the original owner optioned for the speed sensor and no gauges...i would have liked to seen the SPID.

I didn't get to see the SPID of the truck, but I do know it was a '67 K10, and that is also had a radio delete. Also had a 6 cylinder too I beleive...

**bcnya2** · 12-23-2012, 12:24 AM

I made an offer, and then a counter offer......please keep me in mind. Thanks.
Posted via Mobile Device

nobolt · 12-23-2012, 12:38 AM

that option might be rare but there is a reason they faded into the sunset. they are annoying at best, and can actually startle the driver in heavy traffic. i had a 68 pontiac with it and 99.9% of the time it was cranked all the way over to 120mph.

**daddymoo2** · 12-23-2012, 01:36 AM

Shaun1162: Payment sent. Thanks Don
Posted via Mobile Device

Shaun1162 · 12-23-2012, 09:55 AM

Quote:

Originally Posted by daddymoo2

Shaun1162: Payment sent. Thanks Don
Posted via Mobile Device

Sold!

Quote:

Originally Posted by bcnya2

I made an offer, and then a counter offer......please keep me in mind. Thanks.
Posted via Mobile Device

Sorry, you never made any commitment to buy it..... Daddymoo2 was the first to say he'd take it.

**daddymoo2** · 01-09-2013, 05:06 PM

Shaun1162: I still have not received the speed warning assy. Thanks Don
Posted via Mobile Device

12-22-2012, 11:22 PM	#1
Shaun1162 Registered User Join Date: Aug 2010 Location: NH Posts: 368	1967 3 Hole Speedwarning Dash Well, wasn't going to get rid of it... But I don't really forsee myself buying a '67 anytime soon, and so maybe someone on here would like to buy this original '67 speedwarning dash.... I have the original buzzer that goes with the dash (can get photo if needed), but I have no way to test it so it's sold as-is. The knob on the dash doesn't turn the speedwarning needle easily, but if you mess with the cable on the back, it will turn the needle so it's not stuck or anything. Probably just needs to be cleaned. The knob is cracked, and the needles are faded as you can see. The bezel itself is not the greatest- usual cracks around the screw holes, and faded lettering for light, choke, etc. The silver around the edge of the bezel is in decent shape, with some wear and tear. Would look pretty good in an original/patina style truck. The date on the back is '66. There doesn't look to be any burnt spots on the ciruit, or any real bad seperation between the layers. Some surface rust on the top of the tin, but nothing bad. Has the original brass pin on the back, and the circuit has the cut-out for it so it is definately an original speedwarning dash.... Don't really have to sell it, but figured someone on here might be looking for one for their '67. I know I've never seen another one.... $300 Shipped. __________________ - 2010 Silverado - 1984 Chevy M1028 (K-30) - 1969 Chevy C-30 - 1933 Ford Stock Car Last edited by Shaun1162; 12-22-2012 at 11:49 PM.

12-22-2012, 11:28 PM	#2
mo Registered User Join Date: Apr 2001 Location: santa barbara, ca Posts: 829	Re: 1967 3 Hole Speedwarning Dash Do you have the harness or the buzzer? Posted via Mobile Device

12-22-2012, 11:43 PM	#4
mo Registered User Join Date: Apr 2001 Location: santa barbara, ca Posts: 829	Re: 1967 3 Hole Speedwarning Dash so very tempting! somebody grab it before i do please

12-22-2012, 11:43 PM	#5
bcnya2 Senior Member Join Date: Oct 2012 Location: New Windsor, Md (Baltimore) Posts: 945	Re: 1967 3 Hole Speedwarning Dash Would this work on a 72? I understand it was prob not an option....but who cares... if I puchase a tach dash, what would be involved in getting this transferred over and making it function? What is the best you could go on the price?......thanks, Greg Posted via Mobile Device

12-22-2012, 11:50 PM	#7
mo Registered User Join Date: Apr 2001 Location: santa barbara, ca Posts: 829	Re: 1967 3 Hole Speedwarning Dash Ive done a couple and the transfer requires some patience and super tiny cutoff wheel. These things are getting pretty hard to find...it would be a pretty cool project.

12-22-2012, 11:58 PM	#8
bcnya2 Senior Member Join Date: Oct 2012 Location: New Windsor, Md (Baltimore) Posts: 945	Re: 1967 3 Hole Speedwarning Dash Would you take $225? If so, I will paypal you now. Greg Posted via Mobile Device

12-23-2012, 12:00 AM	#9
Shaun1162 Registered User Join Date: Aug 2010 Location: NH Posts: 368	Re: 1967 3 Hole Speedwarning Dash Pretty firm at $300 Shipped. __________________ - 2010 Silverado - 1984 Chevy M1028 (K-30) - 1969 Chevy C-30 - 1933 Ford Stock Car

12-23-2012, 12:03 AM	#10
daddymoo2 Senior Member Join Date: Mar 2010 Location: union,ky Posts: 1,564	Re: 1967 3 Hole Speedwarning Dash I would do 275.00 shipped and will pay ASAP. Thanks Posted via Mobile Device

12-23-2012, 12:05 AM	#11
bcnya2 Senior Member Join Date: Oct 2012 Location: New Windsor, Md (Baltimore) Posts: 945	Re: 1967 3 Hole Speedwarning Dash I offered $225.....can you work somewhere in between? $275 Posted via Mobile Device

12-23-2012, 12:07 AM	#12
leddzepp Moderator Join Date: May 2007 Location: Southern Cal Posts: 19,997	Re: 1967 3 Hole Speedwarning Dash $300 Shipped is a good price for this. __________________ 1972 C/10 Cheyenne Super SWB. Restored, loaded, slammed. 1968 C/10 50th Anniversary LWB. Unrestored, stock, daily driver/work truck. RIP ElJay RIP 67ChevyRedneck RIP Grumpy Old Man

12-23-2012, 12:08 AM	#13
daddymoo2 Senior Member Join Date: Mar 2010 Location: union,ky Posts: 1,564	Re: 1967 3 Hole Speedwarning Dash I will take it. Thanks Posted via Mobile Device

12-23-2012, 12:10 AM	#14
nobolt Registered User Join Date: Oct 2011 Location: Algonac, MI 48001 Posts: 1,848	Re: 1967 3 Hole Speedwarning Dash interesting that the original owner optioned for the speed sensor and no gauges...i would have liked to seen the SPID. __________________ Dave "... government even in its best state is but a necessary evil. Thomas Paine "It wasn't a lie, it was ineptitude with insufficient cover." Donald Draper (Mad Men)

12-23-2012, 12:24 AM	#17
bcnya2 Senior Member Join Date: Oct 2012 Location: New Windsor, Md (Baltimore) Posts: 945	Re: 1967 3 Hole Speedwarning Dash I made an offer, and then a counter offer......please keep me in mind. Thanks. Posted via Mobile Device

12-23-2012, 12:38 AM	#18
nobolt Registered User Join Date: Oct 2011 Location: Algonac, MI 48001 Posts: 1,848	Re: 1967 3 Hole Speedwarning Dash that option might be rare but there is a reason they faded into the sunset. they are annoying at best, and can actually startle the driver in heavy traffic. i had a 68 pontiac with it and 99.9% of the time it was cranked all the way over to 120mph. __________________ Dave "... government even in its best state is but a necessary evil. Thomas Paine "It wasn't a lie, it was ineptitude with insufficient cover." Donald Draper (Mad Men)

12-23-2012, 01:36 AM	#19
daddymoo2 Senior Member Join Date: Mar 2010 Location: union,ky Posts: 1,564	Re: 1967 3 Hole Speedwarning Dash Shaun1162: Payment sent. Thanks Don Posted via Mobile Device



Register or Log In To remove these advertisements.

01-09-2013, 05:06 PM	#21
daddymoo2 Senior Member Join Date: Mar 2010 Location: union,ky Posts: 1,564	Re: 1967 3 Hole Speedwarning Dash Shaun1162: I still have not received the speed warning assy. Thanks Don Posted via Mobile Device

Register or Log In To remove these advertisements.