Need help tunning a 1406 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**BOSS** · 10-29-2003, 09:41 PM

Hey guys,
I just got the truck back with the new motor last friday and put everything new on it.The problem i am haveing is the carb seems to run pretty rich,Kind of loading up alot,i dont know much about tunning these things but i am sure some of you do.Any help would be nice.Thanx

lukecp · 10-29-2003, 10:08 PM

http://www.edelbrock.com/automotive/eps_intro.html

There you go...all the info you need!

RON WOODGEARD · 10-29-2003, 10:12 PM

Go to the store you bought the carb. from. buy a tuning kit. It will have a varied amount of metering rods and jets. ( usually about $35.00)

You can begin with just the rods, There is two small silver plates on top of the carb. along side of the air inlet, Remove these and you can pull the metering rods out. Look at the end of the rods and you'll see they reduce in size towards the end. The larger the diameter at the end, the less fuel that will go through the jets. (And of course Visa-Versa the smaller, the more)

You more then likely can do what tuning is necessary with just the rods. But if you still need less fuel, then you'll have to remove the top of the carb. to get to the jets. Let us know if that happens. And it can get more involved with the jets,springs and rods.

Ron

68 Suburban · 10-29-2003, 11:21 PM

Here is a chart. It depends a lot on your engine and your altitude. I have mine set at "14". "8" was also good for me.

http://www.dingospad.com/cars/1406carb.jpg

10-29-2003, 09:41 PM	#1
BOSS Just here to help Join Date: Jan 2002 Location: Norwood,Mo Posts: 3,893	Need help tunning a 1406 Hey guys, I just got the truck back with the new motor last friday and put everything new on it.The problem i am haveing is the carb seems to run pretty rich,Kind of loading up alot,i dont know much about tunning these things but i am sure some of you do.Any help would be nice.Thanx __________________ Support our site Norwood Survivor

10-29-2003, 10:08 PM	#2
lukecp Formerly yellow72custom Join Date: May 2001 Location: Austin, TX Posts: 7,531	http://www.edelbrock.com/automotive/eps_intro.html There you go...all the info you need! __________________ '72 Chevy C10 Mild 350/TH350/3.07. Ochre/White. Old high school ride. '70 GMC C2500 '62 327 4bbl/SM465/4.56-geared Dana 60. White/White. Project or parts truck. '97 Saturn SL DD. 1.9/5-speed. 40+ highway mpg

10-29-2003, 10:12 PM	#3
RON WOODGEARD Resident Young Old Dude ! Join Date: Jul 2001 Location: Nevada Posts: 1,948	Go to the store you bought the carb. from. buy a tuning kit. It will have a varied amount of metering rods and jets. ( usually about $35.00) You can begin with just the rods, There is two small silver plates on top of the carb. along side of the air inlet, Remove these and you can pull the metering rods out. Look at the end of the rods and you'll see they reduce in size towards the end. The larger the diameter at the end, the less fuel that will go through the jets. (And of course Visa-Versa the smaller, the more) You more then likely can do what tuning is necessary with just the rods. But if you still need less fuel, then you'll have to remove the top of the carb. to get to the jets. Let us know if that happens. And it can get more involved with the jets,springs and rods. Ron

10-29-2003, 11:21 PM	#4
68 Suburban Registered User Join Date: Oct 2000 Location: From Chicago, Live in Phoenix, AZ Posts: 6,802	Here is a chart. It depends a lot on your engine and your altitude. I have mine set at "14". "8" was also good for me. http://www.dingospad.com/cars/1406carb.jpg



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.