(( 1960-1966 Chevy/GMC Pickup Truck Restoration/Modification/Customization Ideas ))

[Strodder]

Originally Posted by Chevy Fleetside

This is for the Stepside guys. I did this right before I sold the bed and never really finished it.

Got any info on how you made these rounded ends.

[1Bad62Pro/Street]

Halogen headlights in classic cars/trucks struggle with dim and scattered light beams.
The Dapper Lighting headlight kits embody the classic look while substantially upgrading the quality and spread of light.
The unique hi-low switch design keeps the costs low while providing a clean and safe light cutoff design, eliminating the issue of "headlight dazing" on the roads.
You get 7" round waterproof headlights and specially-designed 42mm Bi-Xenon projector (high and low beams) with adjustable light focus and flat light distribution to prevent blinding of oncoming traffic.


Dapper Lighting 7 Inch Classic Projector Kit


Dapper Lighting 7 Inch Classic Black Series Projector Kit


http://www.dapperlighting.com/

[piratexpress1369a]

Originally Posted by 1Bad62Pro/Street

Halogen headlights in classic cars/trucks struggle with dim and scattered light beams.
The Dapper Lighting headlight kits embody the classic look while substantially upgrading the quality and spread of light.
The unique hi-low switch design keeps the costs low while providing a clean and safe light cutoff design, eliminating the issue of "headlight dazing" on the roads.
You get 7" round waterproof headlights and specially-designed 42mm Bi-Xenon projector (high and low beams) with adjustable light focus and flat light distribution to prevent blinding of oncoming traffic.


Dapper Lighting 7 Inch Classic Projector Kit


Dapper Lighting 7 Inch Classic Black Series Projector Kit


http://www.dapperlighting.com/

that only works for 2 bulb system .i have 4 bulb

[ClemsonChevy]

[Chevy Fleetside]

Originally Posted by Strodder

Got any info on how you made these rounded ends.

I know I am only a few years late on answering this but, this shows how much I looked at this thread.
I used 1 7/8 U bend exhaust tube. Cut to fit.

[Strodder]

Originally Posted by Chevy Fleetside

I know I am only a few years late on answering this but, this shows how much I looked at this thread.
I used 1 7/8 U bend exhaust tube. Cut to fit.

Yeah I do that too. Here's how I did mine.

[Strodder]

Here's what I did with the running boards and the outside of the bed. The bed is from a 73, on my 65. I'll run the exhaust under the running board.

[1Bad62Pro/Street]

������������ ���������� ������������
Take a look at the front bumper!

[forestb]

Vary cool but I think he will get a ticket for not running side view mirrors

[1Bad62Pro/Street]

1965 Chevy Bare Metal with Gull Wing Doors
http://www.billstruckshop.com/customers_gallery_60.htm