IN 1972 Bed Tool Box Trim and Hardware - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Todd68Chevy** · 01-15-2013, 07:28 PM

--SOLD---I have a few parts that were worth saving on a 72 C10 bedside tool box. The door was junk. I have all 3 pieces of trim. I would think they are driver quality. The part that goes on the door has an area that looks like it is corroded. I tried to picture but the lighting was bad. The small trim that has the angle has some scuffs along the top. The wood grain is pretty good but not perfect either. The lock and lever that attaches to it is there but no key. The rod that attaches to the door to stop it when opening is there but has a rusted area that is pitted. I think it will work fine but will not look the best. The latch plunger, spring and housing is there. The spring seems good, the housing is good but the plunger is extremely ate away on the end. If you want more / better pictures, just let me know. Please post questions to the thread. ---SOLD---- $50.00 plus shipping for all of it.

**Todd68Chevy** · 01-15-2013, 07:32 PM

More pictures

**Todd68Chevy** · 01-15-2013, 07:36 PM

A few more.

**jocko** · 01-15-2013, 08:13 PM

another great deal - wish I needed this stuff. hard to find oem tool door trim.

bronze 72 super · 01-15-2013, 11:56 PM

I'll take it. Shipping to 97050. Please let me know your payment method. I can do pay pal if that's o.k. Thanks Mike.

**Todd68Chevy** · 01-16-2013, 08:19 AM

Quote:

Originally Posted by jocko

another great deal - wish I needed this stuff. hard to find oem tool door trim.

Thanks

Quote:

Originally Posted by bronze 72 super

I'll take it. Shipping to 97050. Please let me know your payment method. I can do pay pal if that's o.k. Thanks Mike.

I will figure shipping when I get home from work tonight. I do accept PayPal. Thanks

**w314speed** · 01-16-2013, 06:14 PM

Great buy Mike. The door molding with clips will clean-up and bring more than the whole package!

**Todd68Chevy** · 01-16-2013, 09:23 PM

Quote:

Originally Posted by bronze 72 super

I'll take it. Shipping to 97050. Please let me know your payment method. I can do pay pal if that's o.k. Thanks Mike.

I can ship USPS Parcel Post with insurance for $13.00. Total of $63.00 Shipping USPS Priority Mail is $36.45 if interested in quicker shipping. PM sent Thanks

bronze 72 super · 01-17-2013, 01:21 AM

Todd, I'll go standard shipping. I'll be using pay pal. I'll pm you with my shipping address. Thanks Mike.

bronze 72 super · 01-17-2013, 01:32 AM

Hey thanks Dan. Been looking for this trim for my project 71 LONGHORN. I'll be buying new wood grain trim and buffing everything out, should look pretty decent when done. Mike.

**Todd68Chevy** · 01-17-2013, 11:17 AM

Quote:

Originally Posted by bronze 72 super

Todd, I'll go standard shipping. I'll be using pay pal. I'll pm you with my shipping address. Thanks Mike.

Sorry but not going to make it to the post office today. I will have them shipped out tomorrow.

I also wanted to make sure you noticed the issue with the door trim I talked about. It is visable in the last picture of post 2 and the 3rd and 4th picture in post 3. It will be on the bottom and probably not noticable but wanted to make sure you did see it. Any issues just let me know. Thanks

bronze 72 super · 01-17-2013, 10:36 PM

Todd, I did see it.No problem with it. I'm missing most trim so this is better than what I don't have. Mike.

**Todd68Chevy** · 01-20-2013, 01:39 PM

bronze 72 super is this the tail gate parts you are needing? It is all from a 67. Let me know. Thanks

bronze 72 super · 01-20-2013, 01:51 PM

I don't need everything posted in pics. I'm 100% sure if 67 is the same hardware as a 71-72, otherwise all I need is the hinges and cups that the tailgate go into on the box. Do you have any way of verifying that 67 is the same as 71? Thanks Mike.

**Todd68Chevy** · 01-20-2013, 05:22 PM

Quote:

Originally Posted by bronze 72 super

I don't need everything posted in pics. I'm 100% sure if 67 is the same hardware as a 71-72, otherwise all I need is the hinges and cups that the tailgate go into on the box. Do you have any way of verifying that 67 is the same as 71? Thanks Mike.

I think they are all the same but I will ask someone and see if I can find out for sure. Ok Do you need these parts and the part with the arms that hold up the tailgate? Is that all you need?

bronze 72 super · 01-20-2013, 11:26 PM

Yes this is all I need. Plus any mounting bolts to mount them with. Thanks Mike.

**Todd68Chevy** · 01-21-2013, 07:58 AM

Quote:

Originally Posted by bronze 72 super

Yes this is all I need. Plus any mounting bolts to mount them with. Thanks Mike.

PM Sent. Thanks

**Todd68Chevy** · 01-22-2013, 01:34 PM

Quote:

Originally Posted by bronze 72 super

Todd, I did see it.No problem with it. I'm missing most trim so this is better than what I don't have. Mike.

Parts are in the mail. Thanks

bronze 72 super · 01-29-2013, 01:27 AM

Todd, got the tool box trim parts today. Arrived all o.k. No problems. Thanks Mike.

**Todd68Chevy** · 01-29-2013, 07:24 AM

Great to hear. Thanks

ChevyCruizer · 01-29-2013, 12:24 PM

Are the tool box "bins" hard to find, or is there a need for the fiberglass bin? I ask because there is one at my local pick a part and I would pull it for someone if it is needed. There is no hardware or door left, just the inner fiberglass bin.

Thanks,

John

bronze 72 super · 01-29-2013, 10:14 PM

Yes get the fiberglass box. It's part of the tool storage box assembly. Just make sure it's not broke, cracked any thing like that. Also see if you can get the metal cut out it's mounted though. Cut the whole opening out of the truck if you can, that makes it a lot easier to mount in any pickup. Keep us posted on this. Mike.

ChevyCruizer · 01-30-2013, 12:01 AM

OK, thanks MIke. I will break out the sawzall and see what I can do.

Thanks, John

**Todd68Chevy** · 01-30-2013, 07:31 AM

Quote:

Originally Posted by ChevyCruizer

Are the tool box "bins" hard to find, or is there a need for the fiberglass bin? I ask because there is one at my local pick a part and I would pull it for someone if it is needed. There is no hardware or door left, just the inner fiberglass bin.

Thanks,

John

What I have found is that any of the special option items are worth saving but that does not always mean they are worth huge amounts of money. Some parts have a good value and some are just helping someone finish their project with that part that they can not find. Either way it is a win. I figure if you can get it at a cheap enough price then save it. If the price is higher then do a search on here to see what others have sold for and base your buying price on that. Good Luck and Happy Hunting.

72chevysupercheyenne · 02-08-2013, 12:37 PM

hi new to this site have any luck with the tool box

01-15-2013, 07:28 PM	#1
Todd68Chevy Senior Member Join Date: Oct 2009 Location: Shelburn Indiana Posts: 3,975	1972 Bed Tool Box Trim and Hardware --SOLD---I have a few parts that were worth saving on a 72 C10 bedside tool box. The door was junk. I have all 3 pieces of trim. I would think they are driver quality. The part that goes on the door has an area that looks like it is corroded. I tried to picture but the lighting was bad. The small trim that has the angle has some scuffs along the top. The wood grain is pretty good but not perfect either. The lock and lever that attaches to it is there but no key. The rod that attaches to the door to stop it when opening is there but has a rusted area that is pitted. I think it will work fine but will not look the best. The latch plunger, spring and housing is there. The spring seems good, the housing is good but the plunger is extremely ate away on the end. If you want more / better pictures, just let me know. Please post questions to the thread. ---SOLD---- $50.00 plus shipping for all of it. Attached Images __________________ Note: All parts I have for sale are also for sale locally. I currently own: 1940 Chevy Fire truck (project), 1946 Chevy truck (project), 1946 Chevy 1 Ton pick up, 1953 Chevy school bus (storage area), 1968 Chevy C10 (I have drove for 26 years), 1994 Chevy C2500 (daily driver), 2005 GMC crew cab K2500 (parts hauler) and more trucks for parts. Last edited by Todd68Chevy; 01-30-2013 at 07:32 AM.

01-15-2013, 07:32 PM	#2
Todd68Chevy Senior Member Join Date: Oct 2009 Location: Shelburn Indiana Posts: 3,975	Re: 1972 Bed Tool Box Trim and Hardware More pictures Attached Images __________________ Note: All parts I have for sale are also for sale locally. I currently own: 1940 Chevy Fire truck (project), 1946 Chevy truck (project), 1946 Chevy 1 Ton pick up, 1953 Chevy school bus (storage area), 1968 Chevy C10 (I have drove for 26 years), 1994 Chevy C2500 (daily driver), 2005 GMC crew cab K2500 (parts hauler) and more trucks for parts.

01-15-2013, 07:36 PM	#3
Todd68Chevy Senior Member Join Date: Oct 2009 Location: Shelburn Indiana Posts: 3,975	Re: 1972 Bed Tool Box Trim and Hardware A few more. Attached Images __________________ Note: All parts I have for sale are also for sale locally. I currently own: 1940 Chevy Fire truck (project), 1946 Chevy truck (project), 1946 Chevy 1 Ton pick up, 1953 Chevy school bus (storage area), 1968 Chevy C10 (I have drove for 26 years), 1994 Chevy C2500 (daily driver), 2005 GMC crew cab K2500 (parts hauler) and more trucks for parts.

01-15-2013, 08:13 PM	#4
jocko Senior Member Join Date: Oct 2009 Location: Godley, TX Posts: 17,994	Re: 1972 Bed Tool Box Trim and Hardware another great deal - wish I needed this stuff. hard to find oem tool door trim.

01-15-2013, 11:56 PM	#5
bronze 72 super Registered User Join Date: Sep 2007 Location: Rufus Oregon Posts: 1,186	Re: 1972 Bed Tool Box Trim and Hardware I'll take it. Shipping to 97050. Please let me know your payment method. I can do pay pal if that's o.k. Thanks Mike.

01-16-2013, 06:14 PM	#7
w314speed Senior Member Join Date: Jun 2005 Location: atlanta Posts: 2,317	Re: 1972 Bed Tool Box Trim and Hardware Great buy Mike. The door molding with clips will clean-up and bring more than the whole package!

01-17-2013, 01:21 AM	#9
bronze 72 super Registered User Join Date: Sep 2007 Location: Rufus Oregon Posts: 1,186	Re: 1972 Bed Tool Box Trim and Hardware Todd, I'll go standard shipping. I'll be using pay pal. I'll pm you with my shipping address. Thanks Mike.

01-17-2013, 01:32 AM	#10
bronze 72 super Registered User Join Date: Sep 2007 Location: Rufus Oregon Posts: 1,186	Re: 1972 Bed Tool Box Trim and Hardware Hey thanks Dan. Been looking for this trim for my project 71 LONGHORN. I'll be buying new wood grain trim and buffing everything out, should look pretty decent when done. Mike.

01-17-2013, 10:36 PM	#12
bronze 72 super Registered User Join Date: Sep 2007 Location: Rufus Oregon Posts: 1,186	Re: 1972 Bed Tool Box Trim and Hardware Todd, I did see it.No problem with it. I'm missing most trim so this is better than what I don't have. Mike.

01-20-2013, 01:39 PM	#13
Todd68Chevy Senior Member Join Date: Oct 2009 Location: Shelburn Indiana Posts: 3,975	Re: 1972 Bed Tool Box Trim and Hardware bronze 72 super is this the tail gate parts you are needing? It is all from a 67. Let me know. Thanks Attached Images __________________ Note: All parts I have for sale are also for sale locally. I currently own: 1940 Chevy Fire truck (project), 1946 Chevy truck (project), 1946 Chevy 1 Ton pick up, 1953 Chevy school bus (storage area), 1968 Chevy C10 (I have drove for 26 years), 1994 Chevy C2500 (daily driver), 2005 GMC crew cab K2500 (parts hauler) and more trucks for parts.

01-20-2013, 01:51 PM	#14
bronze 72 super Registered User Join Date: Sep 2007 Location: Rufus Oregon Posts: 1,186	Re: 1972 Bed Tool Box Trim and Hardware I don't need everything posted in pics. I'm 100% sure if 67 is the same hardware as a 71-72, otherwise all I need is the hinges and cups that the tailgate go into on the box. Do you have any way of verifying that 67 is the same as 71? Thanks Mike.

01-20-2013, 11:26 PM	#16
bronze 72 super Registered User Join Date: Sep 2007 Location: Rufus Oregon Posts: 1,186	Re: 1972 Bed Tool Box Trim and Hardware Yes this is all I need. Plus any mounting bolts to mount them with. Thanks Mike.

01-29-2013, 01:27 AM	#19
bronze 72 super Registered User Join Date: Sep 2007 Location: Rufus Oregon Posts: 1,186	Re: 1972 Bed Tool Box Trim and Hardware Todd, got the tool box trim parts today. Arrived all o.k. No problems. Thanks Mike.

01-29-2013, 07:24 AM	#20
Todd68Chevy Senior Member Join Date: Oct 2009 Location: Shelburn Indiana Posts: 3,975	Re: 1972 Bed Tool Box Trim and Hardware Great to hear. Thanks __________________ Note: All parts I have for sale are also for sale locally. I currently own: 1940 Chevy Fire truck (project), 1946 Chevy truck (project), 1946 Chevy 1 Ton pick up, 1953 Chevy school bus (storage area), 1968 Chevy C10 (I have drove for 26 years), 1994 Chevy C2500 (daily driver), 2005 GMC crew cab K2500 (parts hauler) and more trucks for parts.

01-29-2013, 12:24 PM	#21
ChevyCruizer 17's too small Join Date: Oct 2004 Location: Las Vegas, NV Posts: 336	Re: 1972 Bed Tool Box Trim and Hardware Are the tool box "bins" hard to find, or is there a need for the fiberglass bin? I ask because there is one at my local pick a part and I would pull it for someone if it is needed. There is no hardware or door left, just the inner fiberglass bin. Thanks, John __________________ 68 C10 SWB SS 5 lug power disc brake conversion 2.5 inch drop spindles van tilt column Air Ride Technologies Cool Ride air bag kits Performance Online tubular upper control arms and shock relocator kits ECE super track panhard bar 1 piece side windows



Register or Log In To remove these advertisements.

01-29-2013, 10:14 PM	#22
bronze 72 super Registered User Join Date: Sep 2007 Location: Rufus Oregon Posts: 1,186	Re: 1972 Bed Tool Box Trim and Hardware Yes get the fiberglass box. It's part of the tool storage box assembly. Just make sure it's not broke, cracked any thing like that. Also see if you can get the metal cut out it's mounted though. Cut the whole opening out of the truck if you can, that makes it a lot easier to mount in any pickup. Keep us posted on this. Mike.

01-30-2013, 12:01 AM	#23
ChevyCruizer 17's too small Join Date: Oct 2004 Location: Las Vegas, NV Posts: 336	Re: 1972 Bed Tool Box Trim and Hardware OK, thanks MIke. I will break out the sawzall and see what I can do. Thanks, John __________________ 68 C10 SWB SS 5 lug power disc brake conversion 2.5 inch drop spindles van tilt column Air Ride Technologies Cool Ride air bag kits Performance Online tubular upper control arms and shock relocator kits ECE super track panhard bar 1 piece side windows

02-08-2013, 12:37 PM	#25
72chevysupercheyenne Registered User Join Date: Feb 2013 Location: newburgh ny Posts: 17	Re: 1972 Bed Tool Box Trim and Hardware hi new to this site have any luck with the tool box

Register or Log In To remove these advertisements.