MD WTB Flywheel cover 72 4X4 /w turbo 350 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**72 Super** · 09-30-2012, 08:56 PM

I am looking for a nice clean Flywheel cover for a 72 4x4 with a Turbo 350. Also need the correct mounting screws.

Thanks,
Ray

**72 Super** · 10-01-2012, 07:29 PM

ttt

**72 Super** · 10-13-2012, 06:56 PM

**Ironhorse** · 10-13-2012, 08:38 PM

Went thru the same process, looking for the same. From what I have found out and been told by several board members the 350TH flywheel/dust cover is the same back then for 2wd or 4wd. I got one from a fellow board member and it fit fine to the transmission which is still hooked to the transfer case. Now have to look thru my many bolt cans to find the correct fastener. When I find the correct bolt I will post my findings.

**72 Super** · 10-13-2012, 08:48 PM

Ironhorse, I also believe they are the same too. How is your changeover coming along??

Thanks,
Ray

Quote:

Originally Posted by Ironhorse

Went thru the same process, looking for the same. From what I have found out and been told by several board members the 350TH flywheel/dust cover is the same back then for 2wd or 4wd. I got one from a fellow board member and it fit fine to the transmission which is still hooked to the transfer case. Now have to look thru my many bolt cans to find the correct fastener. When I find the correct bolt I will post my findings.

**Ironhorse** · 10-13-2012, 09:13 PM

The change over is doing pretty well but got a bit more involved than first planed. After removing the sm465/np205 combo decided to give the engine a "freshen" so to speak. Pulled it, put it on a stand and started the engine compartment degrease/clean up. Changing the oil pan gasket, rear main seal, timing chain and gear, water pump, power steering pump and hoses, changed the 2 bbl Rochester and intake to a Edelbrock Performer and a 600 Edelbrock carb, going to a Pertronix dist. conversion, installing a 4x4 dip stick, tall oil fill tube, stock '71-'72 style valve covers and a 4 core radiator.

Also giving the engine, accessories and brackets a new coat of paint. Chevrolet orange on the block and valve covers, water pump, timing chain and semi-gloss black on the brackets and such. Intake is powder coated silver/aluminum color. Installed new studs on the 4x4 straight down manifolds with POR15 cast iron Gray. Whew, this project got more involved than I first had in mind but then a LOT of my projects do that.

pickupman · 10-13-2012, 09:40 PM

Ray, did you find you a 4wd? I will check tomorrow I may have a cover.
Bill

cwilkie · 10-13-2012, 09:50 PM

I have a newer plastic universal cover I bought from summit that I did not use. $20 shipped. It will work with a th350 or th400.
Posted via Mobile Device

**72 Super** · 10-13-2012, 10:36 PM

Quote:

Originally Posted by pickupman

Ray, did you find you a 4wd? I will check tomorrow I may have a cover.
Bill

Hi Bill,

Yes I did, I bought a 72 LWB 4X4.

Thanks,
Ray

**72 Super** · 10-13-2012, 10:37 PM

Quote:

Originally Posted by cwilkie

I have a newer plastic universal cover I bought from summit that I did not use. $20 shipped. It will work with a th350 or th400.
Posted via Mobile Device

Thanks, but I would like to find a factory original 350 cover. I know a turbo 400 cover will work too, but the starter cut out is wider.

Thanks,
Ray

**hilljob26** · 10-14-2012, 07:16 AM

i have one off of my 70 jimmy,,would that work for ya,,it has a th350,,,i will need to look at it again to make sure its not broke anywhere

4oldcars · 10-14-2012, 10:20 AM

I think I have one somewhere in the garage and I'm close enough you can pick it up. I'll check today. If I have one, it's yours.

4oldcars · 10-14-2012, 12:33 PM

I found a lot of things, but no dust cover.

**tll74** · 10-14-2012, 12:39 PM

I can do a nice original metal one for 30.00 shipped, Thanks, Tom

**72 Super** · 10-14-2012, 08:39 PM

Quote:

Originally Posted by 72 Super

Hi Bill,

Yes I did, I bought a 72 LWB 4X4.

Thanks,
Ray

Bill any luck?

thank you,
Ray

**72 Super** · 10-14-2012, 08:40 PM

Quote:

Originally Posted by 4oldcars

I found a lot of things, but no dust cover.

thanks for looking. I know how that can be, can find everything untill you need it

thanks,
Ray

**72 Super** · 10-14-2012, 08:41 PM

Quote:

Originally Posted by tll74

I can do a nice original metal one for 30.00 shipped, Thanks, Tom

Tom, I will wait to hear from Bill. If he doesn't have one, I am interested in yours. Is it an original turbo 350 cover? any pictures?

thank you,
Ray

pickupman · 10-14-2012, 08:50 PM

Ray, sorry I did not make it down to the garage today. I will tomorrow eve. I know I did have some NOS ones at one time if I didn't get rid of them all. will let you know as soon as I can. You will have to shoot me some pic of what you found

**tll74** · 10-15-2012, 01:36 AM

Ray, yes I have one off a TH350. Just let me know if it gets to me and I'll post a pic. Thanks, Tom

pickupman · 10-15-2012, 05:29 PM

Ray, here is a picture of the one I have. let me know if interested. you can email me if you like about it. It does have a few wrinkles in it from tooling

**72 Super** · 10-15-2012, 06:42 PM

Bill, If that is an turbo 350 cover and NOT a turbo 400 cover, I am interested. Pm coming your way.

thank you,
Ray

**Ironhorse** · 10-17-2012, 07:18 PM

Ray, I found out today that the 350TH mated to my np205 actually uses the same bolts or fasteners as is used with the oil pan and timing chain cover. I think they are 1/4 - 20 thread. I have several of them spare if you are in need. May not work on your transmission but threaded in very nicely on mine. If you do not have any PM me your address and I will mail some to you in a bubble pack mailer, no charge, FREEBIE. Just paying it forward for some things I have received FREEBIE style from fellow board members.

tdkosta · 01-16-2013, 01:38 PM

Quote:

Originally Posted by tll74

I can do a nice original metal one for 30.00 shipped, Thanks, Tom

Is your dust cover still for sale?

09-30-2012, 08:56 PM	#1
72 Super Senior Member Join Date: Jul 2001 Location: Hyattsville, Maryland Posts: 3,685	WTB Flywheel cover 72 4X4 /w turbo 350 I am looking for a nice clean Flywheel cover for a 72 4x4 with a Turbo 350. Also need the correct mounting screws. Thanks, Ray __________________ 72 Cheyenne Super (Purchased new by my parents in August of 71) Black and White

10-01-2012, 07:29 PM	#2
72 Super Senior Member Join Date: Jul 2001 Location: Hyattsville, Maryland Posts: 3,685	Re: WTB Flywheel cover 72 4X4 /w turbo 350 ttt __________________ 72 Cheyenne Super (Purchased new by my parents in August of 71) Black and White

10-13-2012, 06:56 PM	#3
72 Super Senior Member Join Date: Jul 2001 Location: Hyattsville, Maryland Posts: 3,685	Re: WTB Flywheel cover 72 4X4 /w turbo 350 __________________ 72 Cheyenne Super (Purchased new by my parents in August of 71) Black and White

10-13-2012, 08:38 PM	#4
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,294	Re: WTB Flywheel cover 72 4X4 /w turbo 350 Went thru the same process, looking for the same. From what I have found out and been told by several board members the 350TH flywheel/dust cover is the same back then for 2wd or 4wd. I got one from a fellow board member and it fit fine to the transmission which is still hooked to the transfer case. Now have to look thru my many bolt cans to find the correct fastener. When I find the correct bolt I will post my findings. __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

10-13-2012, 09:13 PM	#6
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,294	Re: WTB Flywheel cover 72 4X4 /w turbo 350 The change over is doing pretty well but got a bit more involved than first planed. After removing the sm465/np205 combo decided to give the engine a "freshen" so to speak. Pulled it, put it on a stand and started the engine compartment degrease/clean up. Changing the oil pan gasket, rear main seal, timing chain and gear, water pump, power steering pump and hoses, changed the 2 bbl Rochester and intake to a Edelbrock Performer and a 600 Edelbrock carb, going to a Pertronix dist. conversion, installing a 4x4 dip stick, tall oil fill tube, stock '71-'72 style valve covers and a 4 core radiator. Also giving the engine, accessories and brackets a new coat of paint. Chevrolet orange on the block and valve covers, water pump, timing chain and semi-gloss black on the brackets and such. Intake is powder coated silver/aluminum color. Installed new studs on the 4x4 straight down manifolds with POR15 cast iron Gray. Whew, this project got more involved than I first had in mind but then a LOT of my projects do that. __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

10-13-2012, 09:40 PM	#7
pickupman Registered User Join Date: Dec 2000 Location: Greeneville, TN Posts: 3,097	Re: WTB Flywheel cover 72 4X4 /w turbo 350 Ray, did you find you a 4wd? I will check tomorrow I may have a cover. Bill __________________ atheystruck@comcast.net 67 1/2 ton 4wd custom cab 72 1/2 ton 4wd super cheyenne 71 1/2 BB super cheyenne shortbed

10-13-2012, 09:50 PM	#8
cwilkie Chance Join Date: Sep 2001 Location: Belcourt ,ND, USA Posts: 750	Re: WTB Flywheel cover 72 4X4 /w turbo 350 I have a newer plastic universal cover I bought from summit that I did not use. $20 shipped. It will work with a th350 or th400. Posted via Mobile Device __________________ 1968 Chevrolet Stepside BB 396 w/TH400 1972 Chevrolet 3/4 Ton 4x4 BB 496 w/TH400

10-14-2012, 07:16 AM	#11
hilljob26 Registered User Join Date: Dec 2004 Location: Gypsum Kansas 67448 Posts: 1,681	Re: WTB Flywheel cover 72 4X4 /w turbo 350 i have one off of my 70 jimmy,,would that work for ya,,it has a th350,,,i will need to look at it again to make sure its not broke anywhere __________________ 21 2500hd duramax 58 apache HILLJOB GRAPHIX--for all your graphic needs My build thread http://67-72chevytrucks.com/vboard/s...d.php?t=542497 LS ENGINE SWAP INFORMATION THREAD http://67-72chevytrucks.com/vboard/s...d.php?t=377348 4l60 to an NP205 http://67-72chevytrucks.com/vboard/s...43#post3697343

10-14-2012, 10:20 AM	#12
4oldcars Registered User Join Date: Jun 2004 Location: On The Beach, S C Posts: 613	Re: WTB Flywheel cover 72 4X4 /w turbo 350 I think I have one somewhere in the garage and I'm close enough you can pick it up. I'll check today. If I have one, it's yours. __________________ 4oldcars Driving: 1971 Jimmy w/68 Chev front clip, 1953 Bel Air 2 dr hdtp, 1996 Roadmaster wagon, 2000 Eldorado The ones I let go: 1931 2 dr sedan, 1935 pick up, 1938 2 dr sedan, 1962 SS 454, 1963 409 wagon, 1970 short bed, 1972 short bed, 1972 sub, 1976 short bed, 1986 long bed, 03 short bed

10-14-2012, 12:33 PM	#13
4oldcars Registered User Join Date: Jun 2004 Location: On The Beach, S C Posts: 613	Re: WTB Flywheel cover 72 4X4 /w turbo 350 I found a lot of things, but no dust cover. __________________ 4oldcars Driving: 1971 Jimmy w/68 Chev front clip, 1953 Bel Air 2 dr hdtp, 1996 Roadmaster wagon, 2000 Eldorado The ones I let go: 1931 2 dr sedan, 1935 pick up, 1938 2 dr sedan, 1962 SS 454, 1963 409 wagon, 1970 short bed, 1972 short bed, 1972 sub, 1976 short bed, 1986 long bed, 03 short bed

10-14-2012, 12:39 PM	#14
tll74 "Junkyard Dog" Join Date: Jan 2008 Location: Springfield Oregon Posts: 2,527	Re: WTB Flywheel cover 72 4X4 /w turbo 350 I can do a nice original metal one for 30.00 shipped, Thanks, Tom __________________ 72 C-10 Cheyenne Super LWB, Vortec 427,TH700, 3.73 posi, tach, tilt, AM-FM,Frame off in process. http://s289.photobucket.com/albums/l...t=7eae161e.pbw 88 Monte Carlo SS bought new only 10k miles. 73 Chevelle SS 454 had since high school. 74 Camaro Z28 350 AT numbers matching, Black on Black. 73 El Camino SS 350 4sp. 70 Chevelle SS 396 4sp, number matching with LS6 454 69 Chevy C30 Car Hauler 86 K20 383 4sp 4" lift frame off restoration. http://s289.photobucket.com/albums/l...t=1b1082d3.pbw

10-14-2012, 08:50 PM	#18
pickupman Registered User Join Date: Dec 2000 Location: Greeneville, TN Posts: 3,097	Re: WTB Flywheel cover 72 4X4 /w turbo 350 Ray, sorry I did not make it down to the garage today. I will tomorrow eve. I know I did have some NOS ones at one time if I didn't get rid of them all. will let you know as soon as I can. You will have to shoot me some pic of what you found __________________ atheystruck@comcast.net 67 1/2 ton 4wd custom cab 72 1/2 ton 4wd super cheyenne 71 1/2 BB super cheyenne shortbed

10-15-2012, 01:36 AM	#19
tll74 "Junkyard Dog" Join Date: Jan 2008 Location: Springfield Oregon Posts: 2,527	Re: WTB Flywheel cover 72 4X4 /w turbo 350 Ray, yes I have one off a TH350. Just let me know if it gets to me and I'll post a pic. Thanks, Tom __________________ 72 C-10 Cheyenne Super LWB, Vortec 427,TH700, 3.73 posi, tach, tilt, AM-FM,Frame off in process. http://s289.photobucket.com/albums/l...t=7eae161e.pbw 88 Monte Carlo SS bought new only 10k miles. 73 Chevelle SS 454 had since high school. 74 Camaro Z28 350 AT numbers matching, Black on Black. 73 El Camino SS 350 4sp. 70 Chevelle SS 396 4sp, number matching with LS6 454 69 Chevy C30 Car Hauler 86 K20 383 4sp 4" lift frame off restoration. http://s289.photobucket.com/albums/l...t=1b1082d3.pbw

10-15-2012, 05:29 PM	#20
pickupman Registered User Join Date: Dec 2000 Location: Greeneville, TN Posts: 3,097	Re: WTB Flywheel cover 72 4X4 /w turbo 350 Ray, here is a picture of the one I have. let me know if interested. you can email me if you like about it. It does have a few wrinkles in it from tooling Attached Images __________________ atheystruck@comcast.net 67 1/2 ton 4wd custom cab 72 1/2 ton 4wd super cheyenne 71 1/2 BB super cheyenne shortbed

10-15-2012, 06:42 PM	#21
72 Super Senior Member Join Date: Jul 2001 Location: Hyattsville, Maryland Posts: 3,685	Re: WTB Flywheel cover 72 4X4 /w turbo 350 Bill, If that is an turbo 350 cover and NOT a turbo 400 cover, I am interested. Pm coming your way. thank you, Ray __________________ 72 Cheyenne Super (Purchased new by my parents in August of 71) Black and White



Register or Log In To remove these advertisements.

10-17-2012, 07:18 PM	#22
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,294	Re: WTB Flywheel cover 72 4X4 /w turbo 350 Ray, I found out today that the 350TH mated to my np205 actually uses the same bolts or fasteners as is used with the oil pan and timing chain cover. I think they are 1/4 - 20 thread. I have several of them spare if you are in need. May not work on your transmission but threaded in very nicely on mine. If you do not have any PM me your address and I will mail some to you in a bubble pack mailer, no charge, FREEBIE. Just paying it forward for some things I have received FREEBIE style from fellow board members. __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

Register or Log In To remove these advertisements.