? on motors, trannys and transfers???? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

teeitup · 10-23-2003, 04:02 PM

I have a deal brewing for approx. 30-40 motors (283, 307, 350, 396, 402, 454 and the big 500 ones) and approx. 40 tranny's and transfers out of 4x4's(4 speeds and AT's) and about that many complete front end and rearends (1/2 and 3/4 and 1 ton's). A bunch of heads, big and small block. These are out of 67-80 trucks. Anyway I have no place to put most of these and was wondering if there is any companies that buy these things in bulk. I mean motor or 4x4 businesses, I'm just doing some thinking here and really don't want to load and unload all these twice. I'll probably keep the BB's but try to sell the rest in bulk. I HAVE NOT DONE THIS DEAL YET!!! I'm just looking for a little helpful info. Thanks Randy

**MJN** · 10-23-2003, 04:07 PM

On those 4-speed trannies, do you have any SM465s from '73-'80 trucks with chrome shift handles and I am looking for a original shift knob for my '74, it looks like a '72 knob but has the pattern, L 1 2 3 on it. Sorry about highjacking the thread BTW. Thanks

VTKidder · 10-23-2003, 04:07 PM

Can't help you Randy, but you sure one ambitious SOB to swing a deal involving that much iron. I salute you!

teeitup · 10-23-2003, 04:23 PM

MJN, no clue till later.
Adam, thats not all of it, if I get it all, I'll post pics, I'm working on Susie, my boss at work, and my money man. It will take me all winter to haul it all if I do it. Thanks Randy
'

griesel72 · 10-23-2003, 04:34 PM

Wow Randy,

You are the man. I think you do more work after work than most of us do all week long.

David

Lobo'74 · 10-23-2003, 05:21 PM

And I was just at the salvage yard today asking about transmissions and rear ends. Timing.

*rage'nrat638* · 10-23-2003, 05:44 PM

randy a engine rebuilding shop buys core's to rebuild...
theres a place here in carol stream....that sell rebuilt engines bigtime to wholesalers,autopart stores and etc...

if you call a few ,,like auto parts stores in your area and ask who rebuilds the engines they sell,i am sure you will get a few different names to go on...but that don't really mean there going to be in your area...

my buddy that own's a engine shop pays about 100.00 for a 4bolt 350 core....and about the same for a 4bolt 454 block

hope this helps

*rage'nrat638* · 10-23-2003, 06:07 PM

check this out
http://www.used-auto-engines.com/cgi...23103073953.e5

teeitup · 10-23-2003, 06:18 PM

THANKS GUYS for the help. David, I took off this week!

Thanks Randy

**Yukon Jack** · 10-28-2003, 06:04 PM

Any update?

teeitup · 10-28-2003, 08:29 PM

Well Mark, I think its going to happen. I'm getting all my ducks in a row for this deal. If it does happen I will be real busy, he has a 50 x 100 building full of parts, I'll be getting all these motors and stuff, plus about 20 more trucks, and alot of new aftermarket parts and ALOT of new NOS parts, and alot of used parts for these years. If I do it it will be late Nov. before I start it all. I'll let you know when it goes through, I can't wait but we are negotiating now. Thanks Randy

tommie · 10-28-2003, 10:03 PM

check some of the aftermarket trans rebuid shops in your aera, they may want to buy some of the cores.
you may also get some of the machine shops to buy some of the engine cores.
hope your getting a good deal on all of it.

tommie

teeitup · 10-28-2003, 10:26 PM

Thansk Tommie, I'll try them. I don't know if its a good deal or not but I've always wanted to do something like this. Thanks Randy

krazy_texan · 10-29-2003, 12:46 AM

man if you get all those i am in search (not ready to buy just yet) for both axles to go under a 74 blazer, a 4spd granny trans and a transfer case, and possibly a motor all for the same truck and the driveshafts to if you happen to get them

JayDubBlazer · 10-29-2003, 07:18 AM

Well you will never have to buy a boat anchor. teeitup if I am ever down that way I will have to see your pastures of parts.

TsgtE662 · 10-29-2003, 09:55 AM

About how much for a good 402 BB complete?

teeitup · 10-29-2003, 02:40 PM

I have not sealed the deal yet, so I will not price anything until its done and I get some of it hauled home. Thanks Randy

krazy_texan · 10-30-2003, 12:32 AM

if you seal the deal, give me a place to stay and i will come up and help you transport all of it for those parts, lol

easy4 · 10-30-2003, 01:53 AM

If it happens may be intersted in a big block

teeitup · 11-02-2003, 03:13 PM

I'm meeting with him Sunday the 9th, so hopefully I'll know then if I get it all. Thanks Randy

10-23-2003, 04:02 PM	#1
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	? on motors, trannys and transfers???? I have a deal brewing for approx. 30-40 motors (283, 307, 350, 396, 402, 454 and the big 500 ones) and approx. 40 tranny's and transfers out of 4x4's(4 speeds and AT's) and about that many complete front end and rearends (1/2 and 3/4 and 1 ton's). A bunch of heads, big and small block. These are out of 67-80 trucks. Anyway I have no place to put most of these and was wondering if there is any companies that buy these things in bulk. I mean motor or 4x4 businesses, I'm just doing some thinking here and really don't want to load and unload all these twice. I'll probably keep the BB's but try to sell the rest in bulk. I HAVE NOT DONE THIS DEAL YET!!! I'm just looking for a little helpful info. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

10-23-2003, 04:07 PM	#2
MJN Registered User Join Date: Feb 2000 Location: Maquoketa, Ia/ Orr, Mn Posts: 3,032	On those 4-speed trannies, do you have any SM465s from '73-'80 trucks with chrome shift handles and I am looking for a original shift knob for my '74, it looks like a '72 knob but has the pattern, L 1 2 3 on it. Sorry about highjacking the thread BTW. Thanks __________________ '51 South Bend Model "9A" '56 Chevy 3600 NAPCO '74 Chevy Cheyenne Super K20-restored on 37's '72 GMC Sierra Custom K2500- in progress '08 GMC Envoy Denali '12 GMC Sierra 2500HD Denali '17 GMC Yukon XL VCCA member #58596 http://www.nohrco.com

10-23-2003, 04:23 PM	#4
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	MJN, no clue till later. Adam, thats not all of it, if I get it all, I'll post pics, I'm working on Susie, my boss at work, and my money man. It will take me all winter to haul it all if I do it. Thanks Randy ' __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

10-23-2003, 04:34 PM	#5
griesel72 Senior Member Join Date: Apr 2003 Location: Howard, Kansas USA Posts: 1,997	Wow Randy, You are the man. I think you do more work after work than most of us do all week long. David __________________ 1969 K10 Custom 10 1997 Z71 2006 Volkswagen Jetta TDI 2006 King Ranch 1980 Wife

10-23-2003, 05:21 PM	#6
Lobo'74 Registered User Join Date: Nov 2002 Location: Charlottesville, VA Posts: 404	Timing And I was just at the salvage yard today asking about transmissions and rear ends. Timing. __________________ "Truck" '67 small window '79 350 .030 over, LT1 "clone"

10-23-2003, 04:07 PM	#3
VTKidder Registered User Join Date: May 2003 Location: Vermont Posts: 996	Can't help you Randy, but you sure one ambitious SOB to swing a deal involving that much iron. I salute you!

10-23-2003, 05:44 PM	#7
rage'nrat638 Account Suspended Join Date: Mar 2003 Location: THE FALL GUY CHICAGO IL Posts: 5,883	randy a engine rebuilding shop buys core's to rebuild... theres a place here in carol stream....that sell rebuilt engines bigtime to wholesalers,autopart stores and etc... if you call a few ,,like auto parts stores in your area and ask who rebuilds the engines they sell,i am sure you will get a few different names to go on...but that don't really mean there going to be in your area... my buddy that own's a engine shop pays about 100.00 for a 4bolt 350 core....and about the same for a 4bolt 454 block hope this helps

10-23-2003, 06:07 PM	#8
rage'nrat638 Account Suspended Join Date: Mar 2003 Location: THE FALL GUY CHICAGO IL Posts: 5,883	check this out http://www.used-auto-engines.com/cgi...23103073953.e5

10-23-2003, 06:18 PM	#9
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	THANKS GUYS for the help. David, I took off this week! Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

10-28-2003, 06:04 PM	#10
Yukon Jack Post Whore Join Date: Feb 2000 Location: Rose Hill, KS, USA Posts: 12,684	Any update? __________________ 1970 Blazer with a 400 sbc and 4" lift 1980 Pontiac Trans Am, 455 Oldsmobile 2012 Kawasaki Concours 14

10-28-2003, 08:29 PM	#11
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Well Mark, I think its going to happen. I'm getting all my ducks in a row for this deal. If it does happen I will be real busy, he has a 50 x 100 building full of parts, I'll be getting all these motors and stuff, plus about 20 more trucks, and alot of new aftermarket parts and ALOT of new NOS parts, and alot of used parts for these years. If I do it it will be late Nov. before I start it all. I'll let you know when it goes through, I can't wait but we are negotiating now. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

10-28-2003, 10:03 PM	#12
tommie 97' Tahoe 2dr/2wd Join Date: Jul 2002 Location: Huffman,TX Posts: 1,168	check some of the aftermarket trans rebuid shops in your aera, they may want to buy some of the cores. you may also get some of the machine shops to buy some of the engine cores. hope your getting a good deal on all of it. tommie

10-28-2003, 10:26 PM	#13
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Thansk Tommie, I'll try them. I don't know if its a good deal or not but I've always wanted to do something like this. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

10-29-2003, 12:46 AM	#14
krazy_texan Registered User Join Date: Oct 2002 Location: West Des Moines, Ia Posts: 3,233	man if you get all those i am in search (not ready to buy just yet) for both axles to go under a 74 blazer, a 4spd granny trans and a transfer case, and possibly a motor all for the same truck and the driveshafts to if you happen to get them __________________ Krazy Texan My Trucks are made with Wrenches not Chop Sticks 1967 GMC 3/4 ton "Johnny Cash" 1990 v1500 suburban 1967 Ford f100 Swb 4x4 "green bean" GOD BLESS JESUS, JOHN WAYNE, AND THE ALAMO

10-29-2003, 07:18 AM	#15
JayDubBlazer go cyclones Join Date: Jun 2003 Location: Ames, IA Posts: 1,885	Well you will never have to buy a boat anchor. teeitup if I am ever down that way I will have to see your pastures of parts. __________________ Wes PROJECT OLE GREEN 1972 Blazer 4X4 350/700R4 2017 Silverado LT



Register or Log In To remove these advertisements.

10-29-2003, 09:55 AM	#16
TsgtE662 2A674 Tank Rat Join Date: Jul 2003 Location: Maryland Heights, Mo. Posts: 626	About how much for a good 402 BB complete? __________________ '92 GMC Sierra, Sportside, 2wd, 350, Black '92 Chevy Silverado Extended Cab 4 x 4, Blue USAFR = 2A674 = Aircraft Fuel Systems Maintenance i.e. Tank Rat

10-29-2003, 02:40 PM	#17
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	I have not sealed the deal yet, so I will not price anything until its done and I get some of it hauled home. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

10-30-2003, 12:32 AM	#18
krazy_texan Registered User Join Date: Oct 2002 Location: West Des Moines, Ia Posts: 3,233	if you seal the deal, give me a place to stay and i will come up and help you transport all of it for those parts, lol __________________ Krazy Texan My Trucks are made with Wrenches not Chop Sticks 1967 GMC 3/4 ton "Johnny Cash" 1990 v1500 suburban 1967 Ford f100 Swb 4x4 "green bean" GOD BLESS JESUS, JOHN WAYNE, AND THE ALAMO

10-30-2003, 01:53 AM	#19
easy4 Registered User Join Date: May 2003 Location: HULETT WYOMING Posts: 49	looks like it could be a good deal If it happens may be intersted in a big block __________________ 71 gmc 2500 4x4 ugly yellow

11-02-2003, 03:13 PM	#20
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	I'm meeting with him Sunday the 9th, so hopefully I'll know then if I get it all. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

Register or Log In To remove these advertisements.