suggested to do a writeup for here like this - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Devillusion · 07-09-2011, 12:14 AM

Nice.....gonna have to try this one during my power group swap.

conman585 · 07-26-2011, 10:30 PM

Quote:

Originally Posted by TheApocalyptican

Just did this on the front drivers side window. Up or down now takes 3 seconds flat, vs 4 going down before, and 4.5 going up.

Any more success stories w/ this relay mod?

tashspop · 07-27-2011, 06:47 AM

my next electrical mod after i finish under hood.

conman585 · 07-30-2011, 06:50 PM

been working on this all day now and all i get is a clicking sound from the relays. I've retraced my wiring and its all correct. I don't get what I'm doing wrong and its driving me nutts.

mikep87swb · 07-30-2011, 08:09 PM

Hey there I am working on this also and for me it works perfect
Can you give me some more insight on how you have it wired and I can hopefully help. My drivers side is done and I will finish up my pass side tomorrow.

Thanks
Mike
Posted via Mobile Device

conman585 · 08-01-2011, 02:32 AM

Broke out the test light and found my problem. It ended up being a $1.32 splitter that was interrupting my power source. I just took for granted that it wasn't impeding the flow from the junction block. Windows are definitely quicker now.

mikep87swb · 08-05-2011, 02:52 PM

Hi there.

I am also in the process of doing this mod to my windows and it's definately awesome... Drivers side works perfect, but I have a small issue with the passenger side that I beleive is not even relay related...

Before I did this mod my passenger window would only go down a few inches and then stop..... then I had to wait a minute or so before i could get it to continue down another few inches...

With the relay mod I thought it would fix that issue.... but it did not and now it goes down the same 5 or 6 inches but of course faster before it stops....

At this point I am thinking it's a switch or motor issue.... what else could it be and how can i test to see which one it really is before I go and buy both and replace...

Any help is certainly appreciated...
Thanks
Mike

qu1cks1lver56 · 08-05-2011, 08:09 PM

bypass the switch and just touch the wire to power. if it still does it, possibly motor or other related

07-09-2011, 12:14 AM	#26
Devillusion Registered User Join Date: Jan 2010 Location: Brandon, Manitoba, Canada Posts: 782	Re: Power Window Relay Mod? Nice.....gonna have to try this one during my power group swap. __________________ 1967 K30 4x4/12v Cummins/getrag/D60/D70/355s 1967 GMC suburban 4x4/LS swap 5.3/4500/205/10 bolt/14 bolt full floater 1963 C10 reg cab long box 1970 Chevelle 1968 Biscayne 2dr post "...there is no excuse for what I am about to do, but dangit....it's gonna be fun!"

07-27-2011, 06:47 AM	#28
tashspop Registered User Join Date: May 2011 Location: houston tx Posts: 21	Re: Power Window Relay Mod? my next electrical mod after i finish under hood.

07-30-2011, 06:50 PM	#29
conman585 Registered User Join Date: Dec 2006 Location: Midlothian, TX Posts: 87	Re: Power Window Relay Mod? been working on this all day now and all i get is a clicking sound from the relays. I've retraced my wiring and its all correct. I don't get what I'm doing wrong and its driving me nutts.

07-30-2011, 08:09 PM	#30
mikep87swb Registered User Join Date: Mar 2011 Location: Northern New Jersey Posts: 13	Re: Power Window Relay Mod? Hey there I am working on this also and for me it works perfect Can you give me some more insight on how you have it wired and I can hopefully help. My drivers side is done and I will finish up my pass side tomorrow. Thanks Mike Posted via Mobile Device

08-01-2011, 02:32 AM	#31
conman585 Registered User Join Date: Dec 2006 Location: Midlothian, TX Posts: 87	Re: Power Window Relay Mod? Broke out the test light and found my problem. It ended up being a $1.32 splitter that was interrupting my power source. I just took for granted that it wasn't impeding the flow from the junction block. Windows are definitely quicker now.

08-05-2011, 02:52 PM	#32
mikep87swb Registered User Join Date: Mar 2011 Location: Northern New Jersey Posts: 13	Re: Power Window Relay Mod? Hi there. I am also in the process of doing this mod to my windows and it's definately awesome... Drivers side works perfect, but I have a small issue with the passenger side that I beleive is not even relay related... Before I did this mod my passenger window would only go down a few inches and then stop..... then I had to wait a minute or so before i could get it to continue down another few inches... With the relay mod I thought it would fix that issue.... but it did not and now it goes down the same 5 or 6 inches but of course faster before it stops.... At this point I am thinking it's a switch or motor issue.... what else could it be and how can i test to see which one it really is before I go and buy both and replace... Any help is certainly appreciated... Thanks Mike

08-05-2011, 08:09 PM	#33
qu1cks1lver56 Registered User Join Date: Dec 2009 Location: Milton, FL Posts: 733	Re: Power Window Relay Mod? bypass the switch and just touch the wire to power. if it still does it, possibly motor or other related __________________ My 86 http://67-72chevytrucks.com/vboard/s...d.php?t=375526



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.