|
01-28-2013, 12:49 AM
|
#1 |
|
Registered User
Join Date: Aug 2011
Location: Lethbridge Montana
Posts: 259
|
pressure plate
hi guys i have a question about a pressure plate on a 216 chev engine 1948 chev truck it measured 10 3/4 but when you buy a new pressure plate from classic parts they sell a 10 1/2 with a 9 3/8 clutch disc not sure what to do
can anybody help thank you |
|
|
|
01-28-2013, 11:47 AM
|
#2 |
|
Registered User
 
Join Date: Jul 2007
Location: Toppenish, WA
Posts: 15,718
|
Re: pressure plate
Why not just go to the local Napa and be done with it?
http://www.napaonline.com/Catalog/Ca...003_0317685322 For hard parts on any of my projects I always check local sources before buying from the specialty sources.
__________________
Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around. |
|
|
|
|
01-29-2013, 02:39 AM
|
#3 |
|
Cantankerous Geezer
Join Date: Aug 2002
Location: Bel Aire, KS
Posts: 6,264
|
Re: pressure plate
10-3/4 is the heavy duty clutch. If you have a local part store that knows what to do, take your clutch in and let them match it. If not www.bowtiebits.com shows the big clutch in his catalog.
Someone put an 11" GMC clutch in mine. Thankfully I have a good part store.
__________________
Fred There is no such thing as too much cam...just not enough engine. 
|
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
