Wiring kit? Custom ??

[Oldironracing]

What wiring kit are u guys using ? I don't won't the wires to come out the fire wall. Show me some pic. of what u guys have done.
Posted via Mobile Device

[Oldironracing]

You got to be joking no won on here has done these?
Posted via Mobile Device

[eagleuh1]

What do you mean you don't want them to come out of the firewall? Do you just want to hide where they come out, out of sight?

[MFCopenhagen]

I'd also like to see some custom wiring jobs.

[Transformula]

I've used Painless wiring, with my own custom additions. Of course they all penetrate the firewall, but neatly. I immediately fold the wire harness against the firewall (be careful, not too tight-a-bend) and go up and to the right for the engine wiring, and just left and behind the inner fender on the drivers side for the lights and front wiring, I use the "chinese finger trap" type of loom, and where the wires are exposed, a tiny zip tie every 3/4" keeping the wires straight. all ends are either soldered or crimped and heat-shrink sealed. I try to make all the wiring look somewhat modern, but custom and neat, neat, neat.

[Oldironracing]

Originally Posted by eagleuh1

What do you mean you don't want them to come out of the firewall? Do you just want to hide where they come out, out of sight?

I won't a slick fire wall. Don't won't the wires coming out the fire wall. Can come out below the bottom edge of the fire wall. Nothing on the fire wall but master cylinder and steering column.
Posted via Mobile Device