67 Panel doors for sale (front doors, and rear barn doors) - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**68 Stepside** · 10-26-2003, 04:43 PM

I've decided to try and sell the doors off my 67 panel again. Last time I didn't have any bites, not even on ebay.

You get:

L & R front doors, and L & R barn doors.

LF door- Window regulator is stuck. Door opened and closed fine. Lots of exterior surface rust, couldn't find ANY through rust. Good glass.

RF door- Window works fine. Door opened and closed with no problems. Lots of exterior surface rust as well, one pencil lead sized hole where the door bumper sits when the door closes. One scaly spot of rust in the center of the door bottom, a few inches up on the door. I haven't poked at it much, but I can't push it through with my fingers. Maybe it's superficial. Inside door bottom has a few small spots of through rust. Good glass.

LR Barn- Major dent

Probably can't be worked out. Good glass, door opened and closed fine. No through rust on this door either, but as I said, the dent is extremely bad. Comes with hinges and door catch.

RR Barn- NO exterior rust through. Good glass, opened and closed fine. Comes with hinges and door catch. Chevrolet emblem is trashed. Has one tiny ding in the center bottom edge of the door. Some nasty looking rust on one bottom corner of the door, but doesn't appear to be through.

I might have the door catches for the barn doors, but I'm not sure. It's unlikely.

Looking to get 200 bucks firm for all 4 doors. Can not ship, sorry

tjharvey@dtnspeed.net

Thanks,

TJ

**68 Stepside** · 10-26-2003, 04:46 PM

Also, here's the link to pics....
http://www.ofoto.com/BrowsePhotos.js...id=79678060705

**68 Stepside** · 10-27-2003, 01:16 PM

ttt 1

71402BB · 10-28-2003, 08:06 PM

TTT

*racedvl* · 10-28-2003, 11:56 PM

TTT

**68 Stepside** · 11-01-2003, 03:30 AM

ttt....open to offers...I need cash in a bad way....

*racedvl* · 11-01-2003, 08:24 PM

Man you can't even give stuff away. . . .

**68 Stepside** · 11-03-2003, 01:27 AM

Tell me about it....ttt one more time...

10-26-2003, 04:43 PM	#1
68 Stepside huh? Join Date: May 2000 Location: Washington, Illinois Posts: 5,692	67 Panel doors for sale (front doors, and rear barn doors) I've decided to try and sell the doors off my 67 panel again. Last time I didn't have any bites, not even on ebay. You get: L & R front doors, and L & R barn doors. LF door- Window regulator is stuck. Door opened and closed fine. Lots of exterior surface rust, couldn't find ANY through rust. Good glass. RF door- Window works fine. Door opened and closed with no problems. Lots of exterior surface rust as well, one pencil lead sized hole where the door bumper sits when the door closes. One scaly spot of rust in the center of the door bottom, a few inches up on the door. I haven't poked at it much, but I can't push it through with my fingers. Maybe it's superficial. Inside door bottom has a few small spots of through rust. Good glass. LR Barn- Major dent Probably can't be worked out. Good glass, door opened and closed fine. No through rust on this door either, but as I said, the dent is extremely bad. Comes with hinges and door catch. RR Barn- NO exterior rust through. Good glass, opened and closed fine. Comes with hinges and door catch. Chevrolet emblem is trashed. Has one tiny ding in the center bottom edge of the door. Some nasty looking rust on one bottom corner of the door, but doesn't appear to be through. I might have the door catches for the barn doors, but I'm not sure. It's unlikely. Looking to get 200 bucks firm for all 4 doors. Can not ship, sorry tjharvey@dtnspeed.net Thanks, TJ __________________ Someday when I'm lonely, Wishing you weren't so far away, Then I will remember Things we said today. RIP El Jay

10-26-2003, 04:46 PM	#2
68 Stepside huh? Join Date: May 2000 Location: Washington, Illinois Posts: 5,692	Also, here's the link to pics.... http://www.ofoto.com/BrowsePhotos.js...id=79678060705 __________________ Someday when I'm lonely, Wishing you weren't so far away, Then I will remember Things we said today. RIP El Jay

10-27-2003, 01:16 PM	#3
68 Stepside huh? Join Date: May 2000 Location: Washington, Illinois Posts: 5,692	ttt 1 __________________ Someday when I'm lonely, Wishing you weren't so far away, Then I will remember Things we said today. RIP El Jay

10-28-2003, 08:06 PM	#4
71402BB now thats a true COON DOG Join Date: Nov 2000 Location: Franconia, NH Posts: 1,977	TTT __________________ current project 67 402BB stout th350 3.08's with a locker. Plan on tubs 18.5's out back! (thanks Burnsman!) 71 SWB Stepside, was a 250, now is a 402 Big Block with 4 speed and 3.73's ( was crushed by a tree, bed sold, motor pulled) was my first truck!... oh well... 72 LWB 4x4 350 4-speed 3.08's posi wearing army olive drab green (SOLD!) 68 BURB 50TH LOOKALIKE work in progress, soon to have 250-I6 with a 3-speed on the tree 4.11's and posi ( currently sitting in back yard tarped awaiting time, $$$, and lots of love!) 67 1 TON- work truck 396 sm 420 4-speed, flat bed 4.57 gears "big red" (my first landscape truck, very rusty and crusty! but still gets the job done when needed!)

11-01-2003, 03:30 AM	#6
68 Stepside huh? Join Date: May 2000 Location: Washington, Illinois Posts: 5,692	ttt....open to offers...I need cash in a bad way.... __________________ Someday when I'm lonely, Wishing you weren't so far away, Then I will remember Things we said today. RIP El Jay

10-28-2003, 11:56 PM	#5
racedvl Account Suspended Join Date: Jan 2000 Location: Woodstock, IL Posts: 7,020	TTT

11-01-2003, 08:24 PM	#7
racedvl Account Suspended Join Date: Jan 2000 Location: Woodstock, IL Posts: 7,020	Man you can't even give stuff away. . . .

11-03-2003, 01:27 AM	#8
68 Stepside huh? Join Date: May 2000 Location: Washington, Illinois Posts: 5,692	Tell me about it....ttt one more time... __________________ Someday when I'm lonely, Wishing you weren't so far away, Then I will remember Things we said today. RIP El Jay



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.