Hinge Bolts on Cab side question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

pvienneau · 01-31-2013, 12:54 PM

Hello all, does anyone know of a company that would sell the cab side door hinge bolts? They seem to have a slightly thinner head than the normal bolts. It would be great to get them in stainless.

OrrieG · 01-31-2013, 02:10 PM

AD of TF? My TF bolts are standard flange head, 3/8 fine thread I think?

pvienneau · 01-31-2013, 02:51 PM

AD 49 maybe I'm losing it but those bolt heads on the cab are thinner than the hex head on the doorside which are standard thickness. Pat
Posted via Mobile Device

dwcsr · 01-31-2013, 02:54 PM

You will need to go to fastenal or some bolt supplier. You could use a button head or low head cap screw or if you want hex then its a low profile hex but they tend to be very low and may be to low. Option 2 is if you know someone with a lathe to thin out regular Grade 8 bolts heads for you

pvienneau · 01-31-2013, 04:27 PM

Thanks all

01-31-2013, 12:54 PM	#1
pvienneau Registered User Join Date: Aug 2011 Location: Boston, MA Posts: 695	Hinge Bolts on Cab side question Hello all, does anyone know of a company that would sell the cab side door hinge bolts? They seem to have a slightly thinner head than the normal bolts. It would be great to get them in stainless.

01-31-2013, 02:10 PM	#2
OrrieG Registered User Join Date: Jun 2006 Location: Idaho Posts: 8,800	Re: Hinge Bolts on Cab side question AD of TF? My TF bolts are standard flange head, 3/8 fine thread I think? __________________ 1959 Chevy Short Fleetside w/ 74 4WD drive train (current project) OrrieG Build Thread 1964 Chevelle Malibu w/ 355-350TH (daily driver) Helpful AD and TF Manual Site Old Car Manual Project

01-31-2013, 02:51 PM	#3
pvienneau Registered User Join Date: Aug 2011 Location: Boston, MA Posts: 695	Re: Hinge Bolts on Cab side question AD 49 maybe I'm losing it but those bolt heads on the cab are thinner than the hex head on the doorside which are standard thickness. Pat Posted via Mobile Device

01-31-2013, 02:54 PM	#4
dwcsr Hollister Road Co. Join Date: Apr 2005 Location: Houston Posts: 6,131	Re: Hinge Bolts on Cab side question You will need to go to fastenal or some bolt supplier. You could use a button head or low head cap screw or if you want hex then its a low profile hex but they tend to be very low and may be to low. Option 2 is if you know someone with a lathe to thin out regular Grade 8 bolts heads for you

01-31-2013, 04:27 PM	#5
pvienneau Registered User Join Date: Aug 2011 Location: Boston, MA Posts: 695	Re: Hinge Bolts on Cab side question Thanks all



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.